Effects of HZSM-5 on volatile products obtained from the fast pyrolysis of lignin and model compounds
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
This study aimed to experimentally investigate the effect of HZSM-5 on the distribution of volatile products, especially carbon monoxide (CO), C1–C5 hydrocarbons and aromatic hydrocarbons (AHs) during catalytic pyrolysis of lignin and lignin model compounds. Catechol was pyrolyzed using a two-stage tubular reactor (TS-TR) connected to a gas chromatography system over HZSM-5 at 550–950 °C. Forty-three products, including four inorganic gases, twenty C1–C5 hydrocarbons, and nine AHs were quantified using three GC-columns. Results indicated that HZSM-5 accelerated the catechol conversion with a large amount of CO and AHs produced. C1–C5 hydrocarbons were formed during non-catalytic pyrolysis of model compounds, and consumed quickly during HZSM-5 catalytic pyrolysis of catechol. Catalytic pyrolysis of phenol, guaiacol and syringol was carried out at 650 °C in the TS-TR over HZSM-5. HZSM-5 obviously promoted the conversion of lignin model compounds, and largely increased the yield of volatile products especially CO and AHs. Three lignin samples were also catalytically pyrolyzed over HZSM-5 in the TS-TR at 650 °C. HZSM-5 increased the yield of C2-C3 hydrocarbons and AHs, and reduced the yield of oxygenated compounds. HZSM-5 could promote the formation of AHs (lower than 10 wt%) during lignin pyrolysis, but not as obviously as during model compounds pyrolysis (higher than 19 wt%). High yields of char and tar would account for the low catalytic efficiency of HZSM-5 during lignin pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The contribution of biomass in the future global energy supply: a review of 17 studies
Berndes, G., Hoogwijk, M., & van den Broek, R. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00185-x · Cited by 1,149
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Effect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332
Screening heterogeneous catalysts for the pyrolysis of lignin
Jackson, M. A., Compton, D. L., & Boateng, A. A. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.016 · Cited by 187
Chintala, V. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.066 · Cited by 121
Selective pyrolysis of Organosolv lignin over zeolites with product analysis by TG-FTIR
Luo, Z., Wang, S., & Guo, X. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.01.014 · Cited by 94
Cited by
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Self-citationLiu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Lu, X., Zhu, X., Guo, H., Que, H., Wang, D., Liang, D., He, T., Hu, C., Xu, C., & Gu, X. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00987-5 · Cited by 21
Wang, H., Han, H., Sun, E., Zhang, Y., Li, J., Chen, Y., Song, H., Zhao, H., & Kang, Y. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.05.013 · Cited by 19
Self-citation
Metadata
- Authors
- Yang, H., Norinaga, K., Li, J., Zhu, W., & Wang, H.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 181
- Pages
- 207-214
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2895032597
- Cited by
- 44
- References
- 6
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.