Factorial experimental design for the thermal performance of a double pipe heat exchanger using Al2O3-TiO2 hybrid nanofluid
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Abstract Applying nanofluids with modification in the structure have engrossed in fluid mechanics. This utilization has demonstrated significant enhancement in heat exchangers performance. In this work, a double pipe heat exchanger with loaded Al2O3-TiO2 hybrid nanofluid in turbulent flow regimes is studied and evaluated through exergy analysis. Praised equations are employed to verify the resulted information. In order to obtain the exergy efficiency of the nanofluid-loaded double pipe heat exchanger a complete factorial experimental design approach was employed. Nanofluid concentration in the range of 0.2 to 1.5, Reynolds number from 3000 to 12000, and twist ratio between 2 to 8 are considered as the test's variables. Statistical analysis including the Student’s t-test, variance analysis, F-test, and lack of fit is performed to determine the most significant parameters on the exergy efficiency. It is concluded that applying nanocomposites and twisted tapes boost up the exergy efficiency in comparison to utilizing conventional water as a heat transfer fluid. Moreover, raising the nanoparticles volume concentration and the Reynolds number, simultaneous to decreasing the twist ratio can result in higher exergy efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLES
Pak, B. C., & Cho, Y. I. (1998) · Experimental Heat Transfer · doi:10.1080/08916159808946559 · Cited by 4,422 · cited 1×
“Pak and Cho developed proper correlations to calculate the nanofluids density [34]:”
BackgroundConceptions for heat transfer correlation of nanofluids
Xuan, Y., & Roetzel, W. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00369-5 · Cited by 2,823 · cited 2×
“Pak and Cho developed proper correlations to calculate the nanofluids density [34]: = + −ρ φρ φ ρ(1 )nf np bf (1) The amount of specific heat, Cp was obtained from Xuan and Roetzel’s [35] correlation: = + −ρCp φ ρCp φ ρCp( ) ( ) (1 )( )nf np bf (2) Measurements of the based fluid thermal conductivity and the fabricate…”
MethodFundamentals of heat and mass transfer
Kothandaraman, C. P. (2006) · Cited by 1,516
Measurement of temperature-dependent thermal conductivity and viscosity of TiO2-water nanofluids
Duangthongsuk, W., & Wongwises, S. (2009) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2009.01.005 · Cited by 800 · cited 1×
“carried out an investigation and found that beneficial utilizing of nanofluids cannot be restricted only to its remarkable intensification on the thermal conductivity [28].”
BackgroundEnhanced heat transfer and friction factor of MWCNT–Fe3O4/water hybrid nanofluids
Sundar, L. S., Singh, M. K., & Sousa, A. C. M. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.01.012 · Cited by 668
Sundar, L. S., Farooky, M. H., Sarada, S. N., & Singh, M. K. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2012.11.004 · Cited by 278
Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger
Bahmani, M. H., Sheikhzadeh, G. A., Zarringhalam, M., et al. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2017.11.013 · Cited by 276
Stability and thermal analysis of MWCNT-thermal oil-based nanofluids
Ilyas, S. U., Pendyala, R., & Narahari, M. (2017) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.05.004 · Cited by 168
Maddah, H., Alizadeh, M., Ghasemi, N., & Alwi, S. R. W. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.059 · Cited by 144 · cited 1×
“The passive presented approaches are consists of surface coating, extending or make rough the associated heat transfer surfaces, make hybridized the heat transfer fluid with some other materials such as nanoparticles, generate turbulence flow and swirl/vortex (through utilizing twisted tape, snail entrance, tangential…”
Self-citationThermal conductivity and rheological properties of graphite/oil nanofluids
Wang, B., Wang, X., Lou, W., & Hao, J. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.08.008 · Cited by 123
Águila, B., Vasco, D. A., Galvez, P., & Zapata, P. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.106 · Cited by 90
Hajipour, M., & Dehkordi, A. M. (2013) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2013.11.002 · Cited by 79 · cited 1×
“Moreover, greater viscosity amount for the working fluid leads to higher pressure drop [29].”
BackgroundStable colloidal copper nanoparticles for a nanofluid: Production and application
Gurav, P., Naik, S. S., Ansari, K., Srinath, S., Kishore, K. A., Setty, Y. P., & Sonawane, S. H. (2013) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.10.026 · Cited by 69
Roslan, R., Saleh, H., & Hashim, I. (2011) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2011.616778 · Cited by 51 · cited 1×
“[27] studied nanofluids characteristics and reported that between viscosity and thermal conductivity, the former is more influential.”
BackgroundHazbehian, M., Maddah, H., Mohammadiun, H., & Alizadeh, M. (2016) · Heat and Mass Transfer · doi:10.1007/s00231-016-1764-y · Cited by 42
Self-citation
Cited by
An updated review on application of nanofluids in heat exchangers for saving energy
Hajatzadeh Pordanjani, A., Aghakhani, S., Afrand, M., Mahmoudi, B., Mahian, O., & Wongwises, S. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.111886 · Cited by 484
Metadata
- Authors
- Maddah, H., Aghayari, R., Mirzaee, M., Ahmadi, M. H., Sadeghzadeh, M., & Chamkha, A. J.
- Venue
- International Communications in Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 97
- Pages
- 92-102
- ISSN
- 0735-1933 (ISSN-L)
- OpenAlex
- W2885021849
- Cited by
- 178
- References
- 16
- FWCI
- 7.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.