The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermophysical properties of graphene-based nanofluids
Open accessAbstract
Heat transfer operations are very common in the process industry to transfer a huge amount of thermal energy, i.e., heat, from one fluid to another for different purposes. Many fluids are used as heat transfer fluid (HTF), in which water is the most common HTF due to its high specific heat, availability, and affordability. However, conventional HTFs, including water, have a lower thermal conductivity, which is the most critical thermophysical property, hence decreased heat transfer efficiency. The addition of solid particles of highly thermally conductive material, specifically at nano-size, i.e., nanoparticles NPs, result in nanofluid NF, which has evolved over the last two decades as efficient HTF and have been investigated in a wide range of applications. Among NPs, graphene (Gr) based materials have shown very high potential as NF due to the very high thermal conductivity up to 5,000 W/m.K, hence higher thermal conductivity NF. This work aims to thoroughly discuss the thermophysical properties of Gr-based NFs, including thermal conductivity, heat capacity, density, and viscosity. The discussion focus on the thermophysical properties as it is the ultimate determinator of the heat transfer characteristics of the HTF, such as the convective and the overall heat transfer coefficient as well as the heat transfer capacity of the NF. The discussion expands to the relative enhancement in such thermophysical properties reaching up to a 40% increase in thermal conductivity, as the most critical thermophysical property. The discussion shows that Gr-based NF has a much higher thermal conductivity relative to widely studied metal oxide NF and at much lower content, and lower density and viscosity increase, which is critical for determining the pumping power requirements. Critical challenges facing the application of Gr-based NFs such as cost, stability, increased density and viscosity, and environmental impacts are thoroughly discussed with mitigation recommendations given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
Cited by
Battery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
Self-citation
Metadata
- Authors
- Elsaid, K., Abdelkareem, M. A., Maghrabie, H. M., Sayed, E. T., Wilberforce, T., Baroutaji, A., & Olabi, A. G.
- Venue
- International Journal of Thermofluids
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 10
- Pages
- 100073
- ISSN
- 2666-2027 (ISSN-L)
- OpenAlex
- W3130242812
- Cited by
- 167
- References
- 1
- FWCI
- 8.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermophysical properties of graphene-based nanofluids. https://app.cochat.ai/papers/10.1016/j.ijft.2021.100073
- The paper
- Elsaid, K., Abdelkareem, M. A., Maghrabie, H. M., Sayed, E. T., Wilberforce, T., Baroutaji, A., & Olabi, A. G. (2021). Thermophysical properties of graphene-based nanofluids. International Journal of Thermofluids. https://doi.org/10.1016/j.ijft.2021.100073
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.