The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Phase change materials in solar domestic hot water systems: A review
Open accessAbstract
In this work, technologies related to the storage of solar energy, utilizing the latent heat content of phase change materials for the production of domestic hot water are reviewed. Many researchers have been involved in this field in order to accomplish the targets of environmentally friendly solutions and higher efficiency. For domestic use, materials with melting temperature between 40 and 80 °C are commonly studied, with paraffins, fatty acids, salt hydrates and alcohols being the most popular. For harvesting the solar radiation, usually flat plate or evacuated tubes solar collectors are used, either commercial ones or modified. The storage unit may include only phase change material or it can have a hybrid form combined with water. The outcome of the most studies, is that the addition of phase change materials in comparison to systems without latent storage, increases the duration of heat release towards the domestic water at the end of the day and also increases the solar collector's efficiency because it does not experience large temperature fluctuations. However, difficulties emerge during the selection of the appropriate storage material as this must have a high melting temperature in order to provide hot enough domestic water, but not higher than the temperature that the solar collector can produce, in order to fully melt the material. Moreover, investigation is necessary for the selection of the optimum water flow rate that minimizes the charging duration and maximizes the system efficiency and hot water amount. Another challenge that researchers face is the low thermal conductivity of many phase change materials. For this purpose, methods for improving the performance of the systems have been examined and they are also reported.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
A critical review of high-temperature reversible thermochemical energy storage systems
Sunku Prasad, J., Muthukumar, P., Desai, F., Basu, D. N., & Rahman, M. M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113733 · Cited by 405
Evaluation of copper nanoparticles–Paraffin wax compositions for solar thermal energy storage
Lin, S. C., & Al-Kayiem, H. H. (2016) · Solar Energy · doi:10.1016/j.solener.2016.03.004 · Cited by 323
Koukou, M. K., Dogkas, G., Vrachopoulos, M. G., Konstantaras, J., Pagkalos, C., Lymperis, K., Stathopoulos, V., Evangelakis, G., Prouskas, C., Coelho, L., et al. (2019) · ChemEngineering · doi:10.3390/chemengineering3040088 · Cited by 13
Self-citation
Cited by
Energy storage systems: a review
Mitali, J., Dhinakaran, S., & Mohamad, A. A. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.07.002 · Cited by 911
Battery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
Obaideen, K., Nooman AlMallahi, M., Alami, A. H., Ramadan, M., Abdelkareem, M. A., Shehata, N., & Olabi, A. G. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100123 · Cited by 287
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Douvi, E., Pagkalos, C., Dogkas, G., Koukou, M. K., Stathopoulos, V. N., Caouris, Y., & Vrachopoulos, M. G.
- Venue
- International Journal of Thermofluids
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 10
- Pages
- 100075
- ISSN
- 2666-2027 (ISSN-L)
- OpenAlex
- W3135456816
- Cited by
- 161
- References
- 5
- FWCI
- 11.93
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.