The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems
Abstract
Abstract Copper foam (with porosity 97% and pore density 35 pores per inch) based heat sink without phase change material (PCM) and copper foam/PCM composites heat sinks are investigated to observe the behavior of operational time of heat sinks with respect to specific temperature both for charging and discharging. Paraffin wax, RT-35HC, RT-44HC and RT-54HC are used as PCM. Investigations are performed at heat flux of 0.8–2.4 KW/m2 with a gap of 0.4 KW/m2 uniformly distributed. PCM volume fractions of 0.68 and 0.83 are used in composites. Results indicated that at the end of 90 min charging, maximum temperature reduction of 25% is noted for RT-35HC/Copper foam at 0.8 KW/m2 for PCM volume fraction 0.83. Afterwards, RT-44HC/Copper foam reveals maximum temperature reduction of 24% for 1.6 KW/m2. RT-35HC/Copper foam is least efficient at 2.4 KW/m2 which reduces the base temperature only by 5–7%. Maximum enhancement ratio in operation time is noticed as 8 and 7.7 for RT-35HC/Copper foam and RT-44HC/Copper foam respectively at set point temperature (SPT) of 40 °C and 60 °C for respective composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Cited by
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507
Self-citationTowards hybrid nanofluids: Preparation, thermophysical properties, applications, and challenges
Babar, H., & Ali, H. M. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.02.102 · Cited by 485
Self-citationSaid, Z., Sundar, L. S., Tiwari, A. K., Ali, H. M., Sheikholeslami, M., Bellos, E., & Babar, H. (2022) · Physics Reports · doi:10.1016/j.physrep.2021.07.002 · Cited by 391
Self-citationShah, T. R., & Ali, H. M. (2019) · Solar Energy · doi:10.1016/j.solener.2019.03.012 · Cited by 366
Self-citation
Metadata
- Authors
- Rehman, T.-U., Ali, H. M., Saieed, A., Pao, W., & Ali, M.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 127
- Pages
- 381-393
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2888737274
- Cited by
- 274
- References
- 1
- FWCI
- 19.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2018.07.120
- The paper
- Rehman, T.-U., Ali, H. M., Saieed, A., Pao, W., & Ali, M. (2018). Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.120
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.