The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger
Abstract
Abstract The current article investigates the impact of using fins and nano sized materials on performance of discharging system. Various shapes for nanoparticle have been considered. Cold fluid flows in both inner and outer layers and middle layer is full of PCM. To make a careful choice of designing heat storage based on uniform solidification, two factor has been examined; length of fins and shape factor. Temperature and solid fraction distributions were reported at various time steps. The homogeneous model for nanofluid has been extended by incorporating various shapes of CuO nanoparticles. The mathematical model has been offered in the form of PDE's, which were solved using Galerkin FEM. It can be observed that the employing nanofluid augments the discharging rate and best performance is obtained for platelet shape.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conceptions for heat transfer correlation of nanofluids
Xuan, Y., & Roetzel, W. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00369-5 · Cited by 2,823
Ismail, K. A. R., Alves, C. L. F., & Modesto, M. S. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(00)00002-8 · Cited by 459
Sheikholeslami, M., Haq, R.-U., Shafee, A., & Li, Z. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.11.020 · Cited by 446
Self-citationNumerical simulation for solidification in a LHTESS by means of nano-enhanced PCM
Sheikholeslami, M. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.03.013 · Cited by 423
Self-citationAl-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.030 · Cited by 387
Sheikholeslami, M., & Mahian, O. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.122 · Cited by 322
Self-citationSheikholeslami, M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.04.144 · Cited by 256
Self-citationFinite element method for PCM solidification in existence of CuO nanoparticles
Sheikholeslami, M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.05.132 · Cited by 250
Self-citationZeng, Y. D., Fan, L., Xiao, Y., Yu, Z., & Cen, K. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.07.022 · Cited by 137
Bondareva, N. S., & Sheremet, M. А. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.040 · Cited by 124
Cited by
Bakthavatchalam, B., Habib, K., Saidur, R., Saha, B. B., & Irshad, K. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.112787 · Cited by 284
Solidification of PCM within a tank with longitudinal-Y shape fins and CuO nanoparticle
Hajizadeh, M. R., Keshteli, A. N., & Bach, Q.-V. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114188 · Cited by 76
Metadata
- Authors
- Sheikholeslami, M., Haq, R.-U., Shafee, A., Li, Z., Elaraki, Y. G., & Tlili, I.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 135
- Pages
- 470-478
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2912283239
- Cited by
- 369
- References
- 14
- FWCI
- 45.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2019.02.003
- The paper
- Sheikholeslami, M., Haq, R.-U., Shafee, A., Li, Z., Elaraki, Y. G., & Tlili, I. (2019). Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.