The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Thermal management of electronic devices using pin-fin based cascade microencapsulated PCM/expanded graphite composite
Abstract
Abstract Microencapsulated phase change material (MEPCM) could be used for effective thermal management of electronic devices due to its large latent heat, phase change at nearly constant temperature, low volume expansion, and anti-leakage characteristics. Unfortunately, the low thermal conductivity of MEPCM hinders the heat dissipation rate from electronic devices especially at high heat flux conditions. Although the heat transfer capability of MEPCM could be accelerated by adding expanded graphite (EG) or inserting high thermal conductivity pin-fins, the latent heat energy storage capacity of MEPCM composite becomes less which reduces the corresponding operating time of limiting the electronic device temperature rise through solid–liquid phase change. In purpose of clarifying and optimizing this tradeoff effect on electronic device thermal management using MEPCM–EG composite with pin-fins, a numerical study is carried out through 3D lattice Boltzmann method with respect to different pin-fin configurations, EG content, PCM melting temperature, and heat flux conditions. The results indicate that the pin-fin array with medium fin number and fin thickness is beneficial for balancing the increased heat transfer capability and the decreased latent heat of MEPCM so that its optimum thermal performance is achieved. At the early working stage of electronic device, the pin-fin based MEPCM is demonstrated to be more effective than MEPCM–EG composite for controlling the electronic device temperature rise because of the direct contact between pin-fins and electronic heat sink base. However, as the electronic device working time evolves, the MEPCM–EG composite with network heat transfer channel is found to be more efficient for dissipating heat out of electronic device due to the relatively high average thermal conductivity throughout the whole heat sink system. Furthermore, the thermal performance of electronic device is found to be improved by inserting MEPCM–EG composite with cascade melting temperature decreasing from the heat sink base to heat sink cover.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Experimental study on effective thermal conductivity of microcapsules based phase change composites
Wang, T., Wang, S., & Wu, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.068 · Cited by 72
Cited by
Al-Yasiri, Q., & Szabó, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102122 · Cited by 432
A review of the state-of-the-art in electronic cooling
Zhang, Z., Wang, X., & Yan, Y. (2021) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2021.100009 · Cited by 310
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Tiari, S., Hockins, A., & Mahdavi, M. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.100999 · Cited by 122
Metadata
- Authors
- Ren, Q., Guo, P., & Zhu, J.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 149
- Pages
- 119199
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W3000448402
- Cited by
- 190
- References
- 2
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal management of electronic devices using pin-fin based cascade microencapsulated PCM/expanded graphite composite. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2019.119199
- The paper
- Ren, Q., Guo, P., & Zhu, J. (2020). Thermal management of electronic devices using pin-fin based cascade microencapsulated PCM/expanded graphite composite. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119199
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.