The DOI matches its Crossref record.
Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams
Abstract
Abstract Application of different heat transfer augmentation techniques, including the use of fins or foams, were investigated to enhance the melting rate of a solid phase change material within an annulus where the inner and outer pipes were subjected to constant wall temperature. The carbon fibre fins as well as three commonly-used foams (made of three different materials: nickel, aluminium and copper) were simulated. Firstly, keeping the total fin volume constant, the fin number density effect on the melting rate was investigated. After an optimal fin number density was obtained, three possible strategies (unequal length, uneven intervals and tree-shaped fins) were explored aimed at a more comprehensive understanding of the induced heat transfer enhancement. It was observed that with a fixed fin thickness and volume, the melting time is not a monotonic function of the fin number density and can be optimized. Comparing pure PCM melting, the use of optimized fin number reduced over 60% of melting time, while additional 8% and 4% further time reduction could be achieved by appropriately increasing lengths and decreasing intervals of bottom fins, respectively. The use of tree-like fins resulted in a longer melting time, comparing to that of longitudinal straight fins, which indicates it is not always a good option. Finally, the results, primarily the melting rates, were compared with those obtained through the use of metal foams with different metals. It was observed that the melting time of optimized strategy-1 is rather less than those of Cu and Al foams, and approximately 2200s shorter than that of Ni foams. These results indicate that the fins, if designed properly, can be as efficient as foams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Phase Change Materials Application in Battery Thermal Management System: A Review
Liu, C., Xu, D., Weng, J., Zhou, S., Li, W., Wan, Y., Jiang, S., Zhou, D., Wang, J., & Huang, Q. (2020) · Materials · doi:10.3390/ma13204622 · Cited by 282
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Metadata
- Authors
- Zhao, C., Opolot, M., Liu, M., Bruno, F., Mancin, S., & Hooman, K.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 150
- Pages
- 119348
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W3000479166
- Cited by
- 213
- References
- 0
- FWCI
- 14.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2020.119348
- The paper
- Zhao, C., Opolot, M., Liu, M., Bruno, F., Mancin, S., & Hooman, K. (2020). Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119348
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.