Enhancement of PCM melting rate via internal fin and nanoparticles
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
A comprehensive numerical study is presented to investigate the melting process in a square enclosure whose two facing walls are maintained at different constant temperatures while the other facing walls are thermally insulated. Thermophysical properties of the utilized PCM depend on both temperature and phase. The influence of two different orientations of heated and cooled walls, various lengths and positions of the fin that is attached to the hot wall on phase change process is studied. Besides, analyses are performed considering the contribution of CuO nanoparticles and the contribution of each investigated parameter on the enhancement of the melting process is identified. The obtained results show that all the studied parameters have a remarkable influence on melting rate and energy storage, besides, natural convection has an incontrovertible role in melting process. Assembling the fin in the enclosure shortens the melting time between by 27 to 52% depending on its length and 13 to 68% depending on its position compared to the case without fin. It was also found that assembling fin promotes the melting rate up to 52% depending on the heated wall orientation. A further enhancement is attained with the addition of nanoparticles particularly for shorter fin lengths and bottom-heating case. The computed results also reveal that a combined utilization of a shorter fin together with nanoparticles can provide a thermal performance as high as that of a long fin, thus the utilization of nanoparticles with shorter fins may be an alternative to assembling of long fins without nanoparticles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Vivekananthan, M., & Amirtham, V. A. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.03.037 · Cited by 164
Cited by
Wang, X., Li, W., Luo, Z., Wang, K., & Shah, S. P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111923 · Cited by 493
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Metadata
- Authors
- Arıcı, M., Tütüncü, E., Yıldız, Ç., & Li, D.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 156
- Pages
- 119845
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W3024580242
- Cited by
- 177
- References
- 4
- FWCI
- 14.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhancement of PCM melting rate via internal fin and nanoparticles. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2020.119845
- The paper
- Arıcı, M., Tütüncü, E., Yıldız, Ç., & Li, D. (2020). Enhancement of PCM melting rate via internal fin and nanoparticles. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119845
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.