The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Performance analysis of a plate heat exchanger using various nanofluids
Open accessAbstract
In this paper, a corrugated plate heat exchanger in solar energy systems is used to investigate heat transfer and fluid flow characteristics of various nanofluids. By adding various nanoparticles (Al2O3-30 nm, SiC-40 nm, CuO-30 nm and Fe3O4-25 nm) into the base fluid, effects of nanofluid types and particle concentrations (0.05 wt.%, 0.1 wt.%, 0.5 wt.% and 1.0 wt.%) on the thermal performance of the plate heat exchanger are analyzed at flow rates in the range of 3–9 L/min. Results indicate that both heat transfer enhancement and pressure drop for nanofluids show significant increases compared to the base fluid. The Fe3O4-water and CuO-water nanofluids show the best and the worst thermal performances of the plate heat exchanger, respectively. When 1.0 wt.% Fe3O4-water nanofluid is used as the working fluid, compared to DI-water, the convective heat transfer coefficient is increased by 21.9%. However, an increase of 10.1% in pressure drop is obtained for the 1.0 wt.% Fe3O4-water nanofluid. Finally, empirical formulas of experimental Nusselt number are obtained based on the experimental data. A new way to predict the thermal performance for various nanofluids in heat transfer systems is provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Cited by
A comprehensive study of renewable energy sources: Classifications, challenges and suggestions
Ang, T.-Z., Salem, M., Kamarol, M., Das, H. S., Nazari, M. A., & Prabaharan, N. (2022) · Energy Strategy Reviews · doi:10.1016/j.esr.2022.100939 · Cited by 1,126
Sharma, P., Said, Z., Kumar, A., Nižetić, S., Pandey, A., Hoang, A. T., Huang, Z., Afzal, A., Li, C., Le, A. T., et al. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01006 · Cited by 318
Metadata
- Authors
- Zheng, D., Wang, J., Chen, Z., Baleta, J., & Sundén, B.
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 158
- Pages
- 119993
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W3039772730
- Cited by
- 199
- References
- 1
- FWCI
- 8.77
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Performance analysis of a plate heat exchanger using various nanofluids. https://app.cochat.ai/papers/10.1016/j.ijheatmasstransfer.2020.119993
- The paper
- Zheng, D., Wang, J., Chen, Z., Baleta, J., & Sundén, B. (2020). Performance analysis of a plate heat exchanger using various nanofluids. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119993
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.