An alkaline water electrolyzer with nickel electrodes enables efficient high current density operation
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Low-temperature industrial water electrolysis is typically conducted using either liquid alkaline electrolytes or acidic polymer electrolyte membranes (PEMs). The latter approach is considered to be more efficient but also more expensive as it requires Pt and Ir based catalysts. This study reports on an alkaline water electrolyzer with Ni electrodes that operates at a current density of 2 A/cm2 with a cell voltage of 1.85 V, which provides a comparable voltage-current characteristic to the state-of-the-art PEM water electrolyzers. Thin Ni mesh electrodes with surface areas that are thousand times higher than the geometric area were manufactured by an easily scalable and cheap process, i.e. metallurgical hot dip galvanization with subsequent de-alloying. With a thin porous polymer of approximately 140 μm as the diaphragm a low cell resistance of 0.11 Ω cm−2 was obtained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
McCrory, C. C. L., Jung, S., Ferrer, I. M., Chatman, S. M., Peters, J. C., & Jaramillo, T. F. (2015) · Journal of the American Chemical Society · doi:10.1021/ja510442p · Cited by 4,145
Cited by
Anion-Exchange Membrane Water Electrolyzers
Du, N., Roy, C., Peach, R., Turnbull, M., Thiele, S., & Bock, C. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00854 · Cited by 1,075
Current status, research trends, and challenges in water electrolysis science and technology
Grigoriev, S. A., Fateev, V. N., Bessarabov, D. G., & Millet, P. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.03.109 · Cited by 969
Miller, H. A., Bouzek, K., Hnat, J., Loos, S., Bernäcker, C. I., Weißgärber, T., Röntzsch, L., & Meier-Haack, J. (2020) · Sustainable Energy & Fuels · doi:10.1039/c9se01240k · Cited by 785
Yu, M., Budiyanto, E., & Tüysüz, H. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202103824 · Cited by 771
A high-performance capillary-fed electrolysis cell promises more cost-competitive renewable hydrogen
Hodges, A., Hoang, A. L., Tsekouras, G., Wagner, K., Lee, C.-Y., Swiegers, G. F., & Wallace, G. G. (2022) · Nature Communications · doi:10.1038/s41467-022-28953-x · Cited by 334
Metadata
- Authors
- Schalenbach, M., Kasian, O., & Mayrhofer, K. J. J.
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 43
- Issue
- 27
- Pages
- 11932-11938
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W2805897545
- Cited by
- 127
- References
- 1
- FWCI
- 1.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.