The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Enhancing hydrogen production from biomass pyrolysis by dental-wastes-derived sodium zirconate
Abstract
Abstract Sodium zirconate was synthesized via the solid-phase reaction from dental wastes with sodium carbonate. The dental-wastes-derived sodium zirconate (DW-SZ) dramatically enhanced hydrogen (H2) production during biomass pyrolysis due to the presence of alkali metal (Na) and in-situ carbon dioxide (CO2) capture. To be specific, the DW-SZ could maintain a maximum CO2 uptake of 0.195 g-CO2 g-sorbent−1 at the 30th cycle under cyclic CO2 absorption/desorption swings. The total CO2 uptake in all 30 cycles reached 82% of the theoretical CO2 uptake. The synthesized functional material was subsequently employed for H2 production in the pyrolysis of three different biomass samples (i.e., municipal sludge, spirulina, and methylcellulose). The highest H2 yield of 205 ml g−1 was produced by spirulina in presence of functional material, followed by methylcellulose (197 ml g−1), and municipal sludge (142 ml g−1). Moreover, the DW-SZ was characterized by XRD, BET and SEM to help unravel and justify the underlying reaction mechanisms.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It has a great potential to decrease the required operating temperature, cracking time and solid residue yield, in addition, to increase the cracking efficacy of wastes and improves the quality of pyrolysis products (Wang et al. 2019a).”
From Conversion of biomass to biofuels and life cycle assessment: a review (2021) · cites this paper as Wang et al. 2019a
Citations
Cites
Characterization of porous solids and powders: surface area, pore size, and density
(2005) · Choice Reviews Online · doi:10.5860/choice.42-5288 · Cited by 1,637
Agglomerate and particle size effects on sintering yttria-stabilized zirconia
RHODES, W. H. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb09552.x · Cited by 530
Jiang, L., Hu, S., Wang, Y., Su, S., Sun, L., Xu, B., He, L., & Xiang, J. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.08.111 · Cited by 221
Mahadevan, R., Adhikari, S., Shakya, R., Wang, K., Dayton, D., Lehrich, M., & Taylor, S. E. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02984 · Cited by 214
Enhanced hydrogen production from thermochemical processes
Ji, G., Yao, J. G., Clough, P. T., da Costa, J. C. D., Anthony, E. J., Fennell, P. S., Wang, W., & Zhao, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01393d · Cited by 194
Self-citationFracture Resistance of Yttria‐Stabilized Zirconia Dental Implant Abutments
Adatia, N. D., Bayne, S. C., Cooper, L. F., & Thompson, J. Y. (2008) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2008.00378.x · Cited by 131
CO2 Absorption on Na2ZrO3: A Kinetic Analysis of the Chemisorption and Diffusion Processes
Alcérreca-Corte, I., Fregoso-Israel, E., & Pfeiffer, H. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp710475g · Cited by 121
Preparation and High-Temperature CO2 Capture Properties of Nanocrystalline Na2ZrO3
Zhao, T., Ochoa‐Fernández, E., Rønning, M., & Chen, D. (2007) · Chemistry of Materials · doi:10.1021/cm062732h · Cited by 110
Torres-Rodríguez, D. A., Romero‐Ibarra, I. C., Ibarra, I. A., & Pfeiffer, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.02.061 · Cited by 98
Zhao, M. M., Florin, N., & Harris, A. T. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.07.011 · Cited by 94
Self-citation
Research works printed but not linked: 3
- Ji, 2017, Experimental study on CO2 capture mechanisms using Na2ZrO3 sorbents synthesized by soft chemistry method, Chem Eng J, 313, 646, 10.1016/j.cej.2016.12.103 · DOI
- Martínez-dlCruz, 2012, Microstructural thermal evolution of the Na2CO3 phase produced during a Na2ZrO3–CO2 chemisorption process, J Phys Chem C, 116, 9675, 10.1021/jp301917a · DOI
- Martínez-dlCruz, 2013, Cyclic CO2 chemisorption–desorption behavior of Na2ZrO3: structural, microstructural and kinetic variations produced as a function of temperature, J Solid State Chem, 204, 298, 10.1016/j.jssc.2013.06.014 · DOI
Cited by
Conversion of biomass to biofuels and life cycle assessment: a review
Osman, A. I., Mehta, N., Elgarahy, A. M., Al-Hinai, A., Al-Muhtaseb, A. H., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01273-0 · Cited by 761
“It has a great potential to decrease the required operating temperature, cracking time and solid residue yield, in addition, to increase the cracking efficacy of wastes and improves the quality of pyrolysis products (Wang et al. 2019a).”
BackgroundOsman, A. I., Farghali, M., Ihara, I., Elgarahy, A. M., Ayyad, A., Mehta, N., Ng, K. H., Abd El-Monaem, E. M., Eltaweil, A. S., Hosny, M., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01573-7 · Cited by 214
Hosseinzadeh, A., Zhou, J. L., Li, X., Afsari, M., & Altaee, A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111991 · Cited by 203
Slow pyrolysis of municipal solid waste (MSW): A review
Lu, J.-S., Chang, Y., Poon, C.-S., & Lee, D.-J. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123615 · Cited by 171
Gasification of municipal solid waste: Progress, challenges, and prospects
Sajid, M., Raheem, A., Ullah, N., Asim, M., Ur Rehman, M. S., & Ali, N. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112815 · Cited by 169
Self-citationWang, Y., Memon, M. Z., Seelro, M. A., Fu, W., Gao, Y., Dong, Y., & Ji, G. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.206 · Cited by 154
Self-citationPyrolysis synergy of municipal solid waste (MSW): A review
Lee, D., Lu, J.-S., & Chang, J. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123912 · Cited by 127
Zhang, X., Liu, C., Chen, Y., Zheng, G., & Chen, Y. (2021) · Environment Development and Sustainability · doi:10.1007/s10668-021-01932-w · Cited by 123
Wijayasekera, S. C., Hewage, K., Siddiqui, O., Hettiaratchi, P. A., & Sadiq, R. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.11.226 · Cited by 119
A review on municipal solid waste pyrolysis of different composition for gas production
Du, Y., Ju, T., Meng, Y., Lan, T., Han, S., & Jiang, J. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.107026 · Cited by 111
Mehmandoust, M., Li, G., & Erk, N. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c03058 · Cited by 110
Abusweireh, R. S., Rajamohan, N., & Vasseghian, Y. (2022) · Fuel · doi:10.1016/j.fuel.2022.123862 · Cited by 102
Guo, S., Zhang, Y., & Liu, L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149760 · Cited by 100
Progress in in-situ CO2-sorption for enhanced hydrogen production
Sikarwar, V. S., Pfeifer, C., Ronsse, F., Pohořelý, M., Meers, E., Kaviti, A. K., & Jeremiáš, M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101008 · Cited by 97
Elgarahy, A. M., Priya, A. K., Mostafa, H. Y., Zaki, E. G., Elsaeed, S. M., Muruganandam, M., & Elwakeel, K. Z. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.110993 · Cited by 77
Matamba, T., Tahmasebi, A., Yu, J., Keshavarz, A., Abid, H. R., & Iglauer, S. (2023) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2023.106221 · Cited by 71
Wu, Y., Liu, S., Chen, Y., Yang, Y., & Yang, H. (2023) · Fuel · doi:10.1016/j.fuel.2023.129549 · Cited by 48
Farooqi, A. S., Allam, A. N., Shahid, M., Aqil, A., Fajri, K., Park, S., Abdelaziz, O. Y., Abdelnaby, M. M., Hossain, M. M., Habib, M. A., et al. (2024) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2024.100336 · Cited by 47
Ma, X., Li, Y., Huang, X., Feng, T., & Mu, M. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2021.09.009 · Cited by 43
Development of Cu3N electrocatalyst for hydrogen evolution reaction in alkaline medium
Sajeev, A., Paul, A. M., Nivetha, R., Gothandapani, K., Gopal, T. S., Jacob, G. C., Muthuramamoorthy, M., Pandiaraj, S., Alodhayb, A. N., Kim, S. Y., et al. (2022) · Scientific Reports · doi:10.1038/s41598-022-05953-x · Cited by 42
Karaeva, J. V., Timofeeva, S. S., Kovalev, А. A., Kovalev, D. A., Гильфанов, М. Ф., Grigoriev, V. S., & Litti, Y. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.02.057 · Cited by 42
Wu, L., Ma, H., Mei, J., Li, Y., Xu, Q. L., & Li, Z. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.11.229 · Cited by 41
Hydrogen production from biomass: A review combined with bibliometric analysis
Wang, Z., Li, B., Pipitone, G., Liu, Q., Yang, T., Wang, J., & Li, R. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.03.158 · Cited by 37
Shahbeik, H., Hu, S., Motamedi, S., Tajuddin, S. A. F. S. A., Tabatabaei, M., & Aghbashlo, M. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116442 · Cited by 36
Hydrogen-rich energy recovery from microalgae (lipid-extracted) via steam catalytic gasification
Raheem, A., Cui, X., Mangi, F. H., Memon, A. A., Ji, G., Cheng, B., Dong, W., & Zhao, M. M. (2020) · Algal Research · doi:10.1016/j.algal.2020.102102 · Cited by 33
Self-citationPrabhahar, R. S. S., Nagaraj, P., & Jeyasubramanian, K. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.04.123 · Cited by 28
Bernabé‐Pablo, E., Plascencia-Hernández, F., Yañez-Aulestia, A., & Pfeiffer, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123291 · Cited by 27
Liu, G., Du, Z., Lu, H., Zeng, J., Wu, K., & Liang, B. (2023) · Carbon Resources Conversion · doi:10.1016/j.crcon.2023.04.001 · Cited by 26
Kourdi, S. E., Abderafi, S., Cheddadi, A., Mabrouki, J., & Abbassi, M. A. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118206 · Cited by 25
Thermochemical conversions of municipal solid waste into fuels and chemicals
(2023) · Advances in bioenergy · doi:10.1016/bs.aibe.2023.02.002 · Cited by 21
Bi-functional particles for integrated thermo-chemical processes: Catalysis and beyond
Li, H., Dang, C., Yang, G., Cao, Y., Wang, H., Peng, F., & Yu, H. (2021) · Particuology · doi:10.1016/j.partic.2020.12.002 · Cited by 21
Renewable Biomass Wastes for Biohydrogen Production
Cheonh, P. Y. Y., Kansedo, J., Lau, J. S. Y., & Tan, Y. H. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819727-1.00091-1 · Cited by 20
Sorption enhanced reforming: A potential route to produce pure H2 with in-situ carbon capture
Aniruddha, R., Singh, S. A., Reddy, B. M., & Sreedhar, I. (2023) · Fuel · doi:10.1016/j.fuel.2023.128925 · Cited by 19
Biomass‐Based Sustainable Graphene for Advanced Electronic Technology: A Review
Sultana, S., Rahaman, M., Hassan, A., Parvez, M. A., & Chandan, M. R. (2025) · Chemistry - An Asian Journal · doi:10.1002/asia.202500128 · Cited by 18
Bernabé‐Pablo, E., Duan, Y., & Pfeiffer, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125277 · Cited by 15
Wang, F., Cheng, B., Ting, Z., Dong, W., Zhou, H., Anthony, E. J., & Zhao, M. M. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c04139 · Cited by 14
Self-citationMondal, S., Gurumoorthy, A. V. P., & Moorthy, I. G. (2025) · Results in Chemistry · doi:10.1016/j.rechem.2025.102967 · Cited by 11
Zhao, Z., Yang, S.-S., Zhao, X., Sun, H.-J., Ren, N.-Q., Tang, D.-D., Zhou, Y., Xiong, Q., Pang, J.-W., Liu, B.-F., et al. (2025) · Bioresource Technology · doi:10.1016/j.biortech.2025.133904 · Cited by 10
Wang, F., Wang, J., Yu, Z., Ma, J., Liu, L., Wang, T., & Guo, H. (2022) · ACS Omega · doi:10.1021/acsomega.2c00345 · Cited by 10
Self-citationAn Updated Review on Biomass-based Hydrogen Production
(2024) · Biointerface Research in Applied Chemistry · doi:10.33263/briac144.098 · Cited by 9
“Wang and co-workers [52] reported that the incorporation of sodium and in-situ carbon dioxide (CO 2 ) capture in dental waste-derived sodium zirconate (DW-SZ) substantially enhanced hydrogen production in biomass pyrolysis.”
Shanmuganandam, K., Thanikaikarasan, S., Madhavan, V. R., Anichai, J., & Sebastian, P. J. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.09.227 · Cited by 7
Plascencia-Hernández, F., Yañez-Aulestia, A., Hernández-Fontes, C., & Pfeiffer, H. (2024) · Sustainable Energy & Fuels · doi:10.1039/d4se00333k · Cited by 6
Metal oxide adsorbents for efficient CO2 removal from syngas
Hitam, C. N. C., & Aziz, M. A. A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91877-0.00016-7 · Cited by 6
Thermal processing of biomass for energy and fuel production
Zhou, Y., Zhao, N., Li, X., Yu, Y., Elshareef, H., Qian, M., & Lei, H. (2022) · Advances in bioenergy · doi:10.1016/bs.aibe.2022.05.006 · Cited by 5
From Waste to Hydrogen: Utilizing Waste as Feedstock or Catalysts for Hydrogen Generation
Hren, D. T., Nemet, A., & Urbancl, D. (2025) · Clean Technologies · doi:10.3390/cleantechnol7030076 · Cited by 4
“Out of the waste-derived catalysts, the best performing one according to H 2 yield was the Na 2 ZrO 3 catalyst from dental waste-developed by Wang et al. [114], which achieved a yield of 205 mL H 2 /g biomass .”
InfluentialWaste-to-Hydrogen Technology: A Sustainable Approach to Waste Management
Abushammala, M. F. M., Farrag, S. G., Almuaythir, S., Alajlan, Z., Al-Zghoul, T. M., & AlQahtani, D. (2026) · Sustainability · doi:10.3390/su18179043 · Cited by 3
Mahendran, G., Kamaraj, E., & Narayanan, M. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151075 · Cited by 2
Xie, H., Qin, M., Yu, Z., Wang, K., Guo, R., Shao, Z., Zhao, X., & Li, R. (2025) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.14566 · Cited by 2
“Wang 37 found that during the pyrolysis of spirulina, the Na 2 ZrO 3 absorbent maintained the single cycle capacity of absorbing 0.195 g carbon dioxide per gram of adsorbent in 30 cycles, reaching 82% of the theoretical adsorption capacity.”
InfluentialSustainable synthesis of Na₂ZrO₃ from Zircaloy waste for CO₂ capture applications
Gamba, N. S., Larochette, P. A., & Gennari, F. C. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177114 · Cited by 1
Liu, G., Lu, H., Wu, K., Guan, G., & Liang, B. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.164049 · Cited by 1
Peñaranda Carrillo, P. P. (2021) · Institutional Repository of the National University Open and Distance UNAD (Universidad Nacional Abierta y a Distancia)
Metadata
- Authors
- Wang, F., Wang, P., Raheem, A., Ji, G., Memon, M. Z., Song, Y., & Zhao, M.
- Affiliations
- Tsinghua University (CN)
- Wuhan Railway Vocational College of Technology (CN)
- Dalian University of Technology (CN)
- Quaid-e-Awam University of Engineering, Science and Technology (PK)
- Corresponding author
- Ji, Guozhao
- Song, Yinqiang
- Zhao, Ming
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 44
- Issue
- 43
- Pages
- 23846-23855
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W2964950182
- Cited by
- 48
- References
- 46
- Citations by year
- 2026: 2 · 2025: 9 · 2024: 4 · 2023: 7 · 2022: 8 · 2021: 10 · 2020: 7 · 2019: 1
- FWCI
- 2.29
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- International Journal of Hydrogen Energy (publishedVersion)
- Funders
- Dalian University of Technology
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Keywords
- hydrogen production, biomass pyrolysis, Na2ZrO3, dental waste, CO2 capture, CO2 sorbents, alkali metal catalysis, sewage sludge, Spirulina, methylcellulose, solid-phase reaction, waste valorization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.