The DOI matches its Crossref record; 24 of the 26 references it cites were found in a registry or an index.
Modelling and experimental investigation of compact packed bed design of methanol steam reformer
Abstract
A comprehensive mathematical model was developed to analyse methanol steam reforming in catalytic packed-bed tubular reactor. All the important aspects of reaction kinetics of main reactions and thermodynamic terms of heat and mass transfer were studied for commercially available CuO/ZnO/Al2O3 catalysts from Sud-Chemie. This numerical model was simulated using Engineering Equation Solver (EES). Through the set of organized simulation studies, the basic operational boundary conditions of operating temperature (573 K) with respect to complete conversion of methanol and optimum hydrogen generation, optimum S/C ratio (1.4) of methanol water mixture feed and operating capacity of one tubular reactor array were discovered. At temperatures near 573 K it was found that the reformate gas does not require any purification/filtration to be supplied to a HT-PEMFC as the CO concentration in reformate gas was low (below 30000 ppm). The simulation work for understanding the effect of different operating condition(s) on the reformer performance generated design of experiment for investigation of the efforts carried out to evaluate, build and demonstrate a 0.25 kWe equivalent methanol reformer for HT-PEM fuel cell system. The paper discusses few of the important aspects on the experimental investigation of effect of operating conditions on methanol steam reformer design with packed bed configuration for hydrogen production. The basic investigation included the analysis of effect of design and operating parameters on the methanol conversion and quality of reformate gas generation (amount of CO). The investigation also covers the analysis of heat and mass transfer along with chemical reaction and generation of species to achieve optimum process parameters and system efficiency. These investigations led to finalise, the operating parameters and basic design philosophy of the packed bed tubular methanol steam reformer for 5 kWe HT-PEMFC system application.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Moreover, lower reforming temperature ð473 À573 KÞ than other carbon-based fuels such as methane ð1073 À1273 KÞ makes it suitable for stack integration with HT-PEM fuel cells and results in a lower CO production [1,5].”
From Comparison between 1D and 2D numerical models of a multi-tubular packed-bed reactor for methanol steam reforming (2022) · cites this paper as [5]
In the citing paper
“Chougule et al. [5] developed a 1D pseudo-homogeneous steady-state model using Engineering Equation Solver (EES) to analyse the MSR process and thermal performance in a tubular packed-bed reactor.”
From Comparison between 1D and 2D numerical models of a multi-tubular packed-bed reactor for methanol steam reforming (2022) · cites this paper as [5]
In the citing paper
“Moreover, lower reforming temperature ð473 À573 KÞ than other carbon-based fuels such as methane ð1073 À1273 KÞ makes it suitable for stack integration with HT-PEM fuel cells and results in a lower CO production [1,5].”
From Comparison between 1D and 2D numerical models of a multi-tubular packed-bed reactor for methanol steam reforming (2022) · cites this paper as [5]
In the citing paper
“Typically, catalyst kinetic experiments are performed on finely powdered catalysts [5,17].Hence, obvious diffusion limitations within catalyst particles can be avoided, and the collected reaction rates could be referred to as intrinsic.”
From Comparison between 1D and 2D numerical models of a multi-tubular packed-bed reactor for methanol steam reforming (2022) · cites this paper as [5]
Citations
Cites
Atkins, P., Paula, J. D., & Keeler, J. (2022) · Oxford University Press eBooks · doi:10.1093/hesc/9780198847816.001.0001 · Cited by 3,044
Beyond Oil and Gas: The Methanol Economy
Olah, G. A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462121 · Cited by 2,431
Beyond Oil and Gas: The Methanol Economy
Prakash, G. K. S. (2011) · ECS Meeting Abstracts · doi:10.1149/ma2011-01/4/151 · Cited by 1,010
Methanol–steam reforming on Cu/ZnO/Al2O3 catalysts. Part 2. A comprehensive kinetic model
Peppley, B. A., Amphlett, J. C., Kearns, L. M., & Mann, R. F. (1999) · Applied Catalysis A: General · doi:10.1016/s0926-860x(98)00299-3 · Cited by 659
Methanol–steam reforming on Cu/ZnO/Al2O3. Part 1: the reaction network
Peppley, B. A., Amphlett, J. C., Kearns, L. M., & Mann, R. F. (1999) · Applied Catalysis A: General · doi:10.1016/s0926-860x(98)00298-1 · Cited by 583
Hydrogen production by steam reforming of methanol for polymer electrolyte fuel cells
Amphlett, J. C., Creber, K. A. M., Davis, J. W., Mann, R. S., Peppley, B. A., & STOKES, D. (1994) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(94)90117-1 · Cited by 272
Applied Process Design for Chemical and Petrochemical Plants
Ludwig, E. E. (1977) · Medical Entomology and Zoology · Cited by 271
High Temperature Polymer Electrolyte Membrane Fuel Cells: Approaches, Status, and Perspectives
Li, Q., Aili, D., Hjuler, H. A., & Jensen, J. O. (2015) · Springer eBooks · doi:10.1007/978-3-319-17082-4 · Cited by 186
Amphlett, J. C., Evans, M. J., Mann, R. F., & Weir, R. D. (1985) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450630412 · Cited by 167
Hydrogen production by the catalytic steam reforming of methanol part 1: The thermodynamics
Amphlett, J. C., Evans, M. J., Jones, R. A., Mann, R. F., & Weir, R. D. (1981) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450590612 · Cited by 141
Cited by
A review of reformed methanol-high temperature proton exchange membrane fuel cell systems
Li, N., Cui, X., Zhu, J., Zhou, M., Liso, V., Cinti, G., Sahlin, S. L., & Araya, S. S. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113395 · Cited by 132
A compact catalytic foam reactor for decomposition of ammonia by the Joule-heating mechanism
Badakhsh, A., Kwak, Y., Lee, Y.-J., Jeong, H., Kim, Y., Sohn, H., Nam, S. W., Yoon, C. W., Park, C. W., & Jo, Y. S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130802 · Cited by 107
Wang, H., Harkou, E., Constantinou, A., Al-Salem, S. M., Manos, G., & Tang, J. (2025) · Chemical Society Reviews · doi:10.1039/d4cs00551a · Cited by 101
Achomo, M. A., Kumar, A., Peela, N. R., & Muthukumar, P. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.01.159 · Cited by 99
Hafeez, S., Aristodemou, E., Manos, G., Al-Salem, S. M., & Constantinou, A. (2020) · RSC Advances · doi:10.1039/d0ra06834a · Cited by 56
Metadata
- Authors
- Chougule, A., & Sonde, R. R.
- Affiliations
- Thermax (India) (IN)
- Corresponding author
- Chougule, Abhijeet
- ORCID
- Chougule, Abhijeet
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 44
- Issue
- 57
- Pages
- 29937-29945
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W2980544479
- Cited by
- 47
- References
- 26
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 3 · 2023: 10 · 2022: 6 · 2021: 11 · 2020: 8
- FWCI
- 1.31
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- International Journal of Hydrogen Energy (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Physical Sciences › Engineering › Computational Mechanics › Heat and Mass Transfer in Porous Media
- Keywords
- methanol steam reforming, packed bed tubular reactor, CuO/ZnO/Al2O3 catalyst, hydrogen production, high-temperature PEM fuel cells, CO concentration, heat and mass transfer, reaction kinetics, methanol conversion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.