Gas diffusion layers for PEM fuel cells: Materials, properties and manufacturing – A review
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Designing the next generation of proton-exchange membrane fuel cells
Jiao, K., Xuan, J., Du, Q., Bao, Z., Xie, B., Wang, B., Zhao, Y., Fan, L., Wang, H., Hou, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-03482-7 · Cited by 2,947
Omrani, R., & Shabani, B. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.132 · Cited by 245
A technical review on gas diffusion, mechanism and medium of PEM fuel cell
Jayakumar, A., Sethu, S. P., Ramos, M., Robertson, J., & Al-Jumaily, A. (2015) · Ionics · doi:10.1007/s11581-014-1322-x · Cited by 148
Self-citationSassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03005 · Cited by 143
Research works printed but not linked: 107
- Madheswaran, 2022, Recent advancement on thermal management strategies in PEM fuel cell stack: a technical assessment from the context of fuel cell electric vehicle application, Energy Sources, 44, 3100, 10.1080/15567036.2022.2058122 · DOI
- Okonkwo, 2020, A review of gas diffusion layer properties and water management in proton exchange membrane fuel cell system, Int J Energy Res, 1
- Martín-Alcántara, 2022, Effect of the gas diffusion layer design on the water management and cell performance of a PEM fuel cell, Processes, 10, 1395, 10.3390/pr10071395 · DOI
- Cindrella, 2009, Gas diffusion layer for proton exchange membrane fuel cells-A review, J Power Sources, 194, 146, 10.1016/j.jpowsour.2009.04.005 · DOI · Paper page
- Omrani, 2019, Review of gas diffusion layer for proton exchange membrane-based technologies with a focus on unitised regenerative fuel cells, Int J Hydrogen Energy, 44, 3834, 10.1016/j.ijhydene.2018.12.120 · DOI
- Park, 2012, A review of gas diffusion layer in PEM fuel cells: materials and designs, Int J Hydrogen Energy, 37, 5850, 10.1016/j.ijhydene.2011.12.148 · DOI · Paper page
- Park, 2011, Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance, Fuel, 90, 436, 10.1016/j.fuel.2010.09.003 · DOI
- Zamel, 2009, Correlation for the effective gas diffusion coefficient in carbon paper diffusion media, Energy Fuel, 23, 6070, 10.1021/ef900653x · DOI
- Salahuddin, 2018, Superhydrophobic PAN nanofibers for gas diffusion layers of proton exchange membrane fuel cells for cathodic water management, Int J Hydrogen Energy, 43, 11530, 10.1016/j.ijhydene.2017.07.229 · doi:10.1016/j.ijhydene.2017.07.229
- Liu, 2018, A high-performance direct methanol fuel cell technology enabled by mediating high-concentration methanol through a graphene aerogel, Small Methods, 2, 7, 10.1002/smtd.201800138 · DOI
- Öner, 2020, Utilization of the graphene aerogel as PEM fuel cell catalyst support: effect of polypyrrole (PPy) and polydimethylsiloxane (PDMS) addition, Int J Hydrogen Energy, 45, 34818, 10.1016/j.ijhydene.2020.05.053 · DOI
- Yi, 2012, Investigation of sintered stainless steel fiber felt as gas diffusion layer in proton exchange membrane fuel cells, Int J Hydrogen Energy, 37, 11334, 10.1016/j.ijhydene.2012.04.161 · DOI
- Kariya, 2015, Effects of porous flow field type separators using sintered Ni-based alloy powders on interfacial contact resistances and fuel cell performances, Energy, 87, 134, 10.1016/j.energy.2015.04.060 · doi:10.1016/j.energy.2015.04.060
- Ito, 2015, Effect of through-plane polytetrafluoroethylene distribution in a gas diffusion layer on a polymer electrolyte unitized reversible fuel cell, Int J Hydrogen Energy, 40, 16556, 10.1016/j.ijhydene.2015.09.102 · DOI
- Chen, 2010, Gas diffusion layer with titanium carbide for a unitized regenerative fuel cell, Electrochim Acta, 55, 8801, 10.1016/j.electacta.2010.07.103 · doi:10.1016/j.electacta.2010.07.103
- Jayakumar, 2017, Manufacturing the gas diffusion layer for PEM fuel cell using a novel 3D printing technique and critical assessment of the challenges encountered, Materials, 10, 1, 10.3390/ma10070796 · DOI
- Choi, 2014, Next-generation polymer-electrolyte-membrane fuel cells using titanium foam as gas diffusion layer, ACS Appl Mater Interfaces, 6, 7665, 10.1021/am500962h · DOI
- Steen, 2017, Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells, Int J Green Energy, 14, 162, 10.1080/15435075.2016.1253582 · DOI
- Abraham, 2021, Design and fabrication of a quick-fit architecture air breathing direct methanol fuel cell, Int J Hydrogen Energy, 46, 6845, 10.1016/j.ijhydene.2020.11.184 · doi:10.1016/j.ijhydene.2020.11.184
- Miura, 2009, An investigation of effect of micro-structure on current collector for polymer electrolyte fuel cells, Therm Sci Eng, 17, 75
- Stampino, 2013, Electrical performance of PEM fuel cells with different gas diffusion layers, J Fuel Cell Sci Technol, 8, 1
- Schweiss, 2016, White paper SIGRACET ® gas diffusion layers for PEM fuel cells , electrolyzers and batteries, SGL Group, 1–10
- Shu, 2013, High performance cathode based on carbon fiber felt for magnesium-air fuel cells, Int J Hydrogen Energy, 38, 5885, 10.1016/j.ijhydene.2013.02.093 · doi:10.1016/j.ijhydene.2013.02.093
- Yang, 2010, Carbon cloth based on PAN carbon fiber practicability for PEMFC applications, Int J Hydrogen Energy, 35, 2791, 10.1016/j.ijhydene.2009.05.019 · DOI
- Chu, 2003, Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell, J Power Sources, 123, 1, 10.1016/S0378-7753(02)00605-5 · DOI · Paper page
- Gostick, 2009, On the role of the microporous layer in PEMFC operation, Electrochem Commun, 11, 576, 10.1016/j.elecom.2008.12.053 · DOI · Paper page
- Zhang, 2020, Study of the mechanical behavior of paper-type GDL in PEMFC based on microstructure morphology, Int J Hydrogen Energy, 45, 29379, 10.1016/j.ijhydene.2020.07.240 · DOI
- Radhakrishnan, 2010, Effect of cyclic compression on structure and properties of a Gas Diffusion Layer used in PEM fuel cells, Int J Hydrogen Energy, 35, 11107, 10.1016/j.ijhydene.2010.07.009 · DOI
- Nazemian, 2020, Impact of carbon paper structural parameters on the performance of a polymer electrolyte fuel cell cathode via lattice Boltzmann method, Acta Mechanica Sinica/Lixue Xuebao, 36, 367, 10.1007/s10409-019-00919-1 · doi:10.1007/s10409-019-00919-1
- Lee, 2020, A parametric study on the deformation of gas diffusion layer in PEM fuel cell, J Mech Sci Technol, 34, 259, 10.1007/s12206-019-1227-8 · DOI
- Bouziane, 2020, Impact of cyclic mechanical compression on the electrical contact resistance between the gas diffusion layer and the bipolar plate of a polymer electrolyte membrane fuel cell, Renew Energy, 153, 349, 10.1016/j.renene.2020.02.033 · DOI
- Sun, 2022, Understanding of the role of carbon fiber paper in proton exchange membrane fuel cells, J Electrochem Energy Conv Storage, 19, 1
- Ge, 2006, Effect of gas diffusion layer compression on PEM fuel cell performance, J Power Sources, 159, 922, 10.1016/j.jpowsour.2005.11.069 · DOI · Paper page
- Jayakumar, 2016, A novel 3D printing technique to synthesise gas diffusion Layer for PEM fuel cell application, ASME Int Mech Eng Congress Exp Proc (IMECE)
- Sima, 2015, Application of porous copper for GDL in PEM fuel cells, J Optoelectron Adv Mater, 17, 602
- El-Kharouf, 2012, Proton exchange membrane fuel cell degradation and testing: Review, J Energy Inst, 85, 188, 10.1179/1743967112Z.00000000036 · DOI
- Zhang, 2008, Performance of a metallic gas diffusion layer for PEM fuel cells, J Power Sources, 176, 293, 10.1016/j.jpowsour.2007.10.055 · DOI
- Hussain, 2017, Metal based gas diffusion layers for enhanced fuel cell performance at high current densities, J Power Sources, 337, 18, 10.1016/j.jpowsour.2016.11.001 · DOI
- Desplobain, 2009, Macroporous silicon hydrogen diffusion layers for micro-fuel cells, Phys Status Solidi (A) Appl Mater Sci, 206, 1282, 10.1002/pssa.200881081 · doi:10.1002/pssa.200881081
- Xu, 2019, An integrated model of the water transport in nonuniform compressed gas diffusion layers for PEMFC, Int J Hydrogen Energy, 26, 13777, 10.1016/j.ijhydene.2019.03.222 · DOI
- Yuan, 2020, Study of water transport mechanism based on the single straight channel of proton exchange membrane fuel cell, AIP Adv, 10, 10.1063/5.0023383 · doi:10.1063/5.0023383
- Arvay, 2012, Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells - a review, J Power Sources, 213, 317, 10.1016/j.jpowsour.2012.04.026 · DOI
- Fishman, 2011, Heterogeneous through-plane porosity distributions for treated heterogeneous through-plane porosity distributions for treated PEMFC GDLs, J Electrochem Soc, 158, B841, 10.1149/1.3594578 · DOI
- Turkmen, 2018, The effect of different gas diffusion layer porosity on proton exchange membrane fuel cells, Fuel, 222, 465, 10.1016/j.fuel.2018.02.058 · DOI
- Xia, 2021, Optimization of gas diffusion layer in high temperature PEMFC with the focuses on thickness and porosity, Appl Energy, 300, 10.1016/j.apenergy.2021.117357 · DOI
- Athanasaki, 2021, Design and development of gas diffusion layers with pore forming agent for proton exchange membrane fuel cells at various relative humidity conditions, Int J Hydrogen Energy, 46, 6835, 10.1016/j.ijhydene.2020.11.187 · DOI
- Simon, 2017, Influence of the gas diffusion layer compression on the oxygen transport in PEM fuel cells at high water saturation levels, J Electrochem Soc, 164, F591, 10.1149/2.0691706jes · DOI · Paper page
- Tanuma, 2017, Effect of properties of hydrophilic microporous layer (MPL) on PEFC performance, J Electrochem Soc, 164, F499, 10.1149/2.0371706jes · DOI
- Xu, 2021, Temperature dependent water transport mechanism in gas diffusion layers revealed by subsecond operando X-ray tomographic microscopy, J Power Sources, 490, 10.1016/j.jpowsour.2021.229492 · DOI
- Nishiyama, 2011, Water transport characteristics in the gas diffusion media of proton exchange membrane fuel cell - role of the microporous layer, J Power Sources, 196, 1847, 10.1016/j.jpowsour.2010.09.055 · DOI
- Wargo, 2013, Resolving macro- and micro-porous layer interaction in polymer electrolyte fuel cells using focused ion beam and X-ray computed tomography, Electrochim Acta, 87, 201, 10.1016/j.electacta.2012.09.008 · DOI
- Hiramitsu, 2010, Influence of humidification on deterioration of gas diffusivity in catalyst layer on polymer electrolyte fuel cell, J Power Sources, 195, 435, 10.1016/j.jpowsour.2009.07.035 · DOI
- Zhao, 2021, Study on water transport mechanisms of the PEMFC based on a visualization platform and water balance model, Int J Chem Eng, 2021, 1, 10.1155/2021/9298305 · DOI
- Hussaini, 2010, Measurement of relative permeability of fuel cell diffusion media, J Power Sources, 195, 3830, 10.1016/j.jpowsour.2009.12.105 · DOI
- Ismail, 2013, Effect of PTFE loading of gas diffusion layers on the performance of proton exchange membrane fuel cells running at high-ef fi ciency operating conditions, Int J Energy Res, 37, 1592, 10.1002/er.2968 · DOI
- Ko, 2018, The effect of through plane pore gradient GDL on the water distribution of PEMFC, Int J Hydrogen Energy, 43, 2369, 10.1016/j.ijhydene.2017.12.007 · DOI
- Zhu, 2021, Stochastically modeled gas diffusion layers: effects of binder and polytetrafluoroethylene on effective gas diffusivity, J Electrochem Soc, 168, 10.1149/1945-7111/abdc60 · DOI
- Yoshimune, 2022, A simple method to measure through-plane effective gas diffusivity of a gas diffusion layer for polymer electrolyte fuel cells, Int J Heat Mass Tran, 191, 10.1016/j.ijheatmasstransfer.2022.122887 · doi:10.1016/j.ijheatmasstransfer.2022.122887
- Chen, 2019, Study on the characteristics of GDL with different PTFE content and its effect on the performance of PEMFC, Int J Heat Mass Tran, 128, 1168, 10.1016/j.ijheatmasstransfer.2018.09.097 · DOI
- Balzarotti, 2020, Optimization of perfluoropolyether-based gas diffusion media preparation for PEM fuel cells, Energies, 13, 1, 10.3390/en13071831 · DOI
- Stampino, 2013, Effect of different hydrophobic agents onto the surface of gas diffusion layers for PEMFC, Chem Eng Trans, 32, 1603
- Latorrata, 2020, Innovative perfluoropolyether-functionalized gas diffusion layers with enhanced performance in polymer electrolyte membrane fuel cells, Fuel Cell, 20, 166, 10.1002/fuce.201900169 · DOI
- Park, 2012, Fabrication of gas diffusion layer (GDL) containing microporous layer using flourinated ethylene prophylene (FEP) for proton exchange membrane fuel cell (PEMFC), Int J Precis Eng Manuf, 13, 1145, 10.1007/s12541-012-0152-x · doi:10.1007/s12541-012-0152-x
- Park, 2009, Fabrication of GDL microporous layer using PVDF for PEMFCs, J Phys Conf, 165, 1, 10.1088/1742-6596/165/1/012046 · doi:10.1088/1742-6596/165/1/012046
- Park, 2004, Effect of PTFE contents in the gas diffusion media on the performance of, PEMFC, 131, 182
- Truong, 2021, Effect of gas diffusion layer thickness on the performance of anion exchange membrane fuel cells, Processes, 9, 718, 10.3390/pr9040718 · DOI
- Prasanna, 2004, Influence of cathode gas diffusion media on the performance of the PEMFCs, J Power Sources, 131, 147, 10.1016/j.jpowsour.2004.01.030 · DOI · Paper page
- Zhou, 2006, Effects of the electrical resistances of the GDL in a PEM fuel cell, J Power Sources, 161, 444, 10.1016/j.jpowsour.2006.04.106 · DOI
- Mishra, 2004, Measurement and prediction of electrical contact resistance between gas diffusion layers and bipolar plate for applications to PEM fuel cells, Trans ASME, 1, 2
- Hamour, 2015, Electrical conductivity of PEMFC under loading, J Power Sources, 289, 160, 10.1016/j.jpowsour.2015.04.145 · doi:10.1016/j.jpowsour.2015.04.145
- Bock, 2018, Thermal conductivity and compaction of GDL-MPL interfacial composite material, J Electrochem Soc, 165, F514, 10.1149/2.0751807jes · DOI
- Sadeghifar, 2014, Effect of Polytetrafluoroethylene (PTFE) and micro porous layer (MPL) on thermal conductivity of fuel cell gas diffusion layers: modeling and experiments, J Power Sources, 248, 632, 10.1016/j.jpowsour.2013.09.136 · DOI · Paper page
- Wang, 2007, Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells, Electrochim Acta, 52, 3965, 10.1016/j.electacta.2006.11.012 · DOI · Paper page
- Antolini, 2002, Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells, J Power Sources, 109, 477, 10.1016/S0378-7753(02)00112-X · DOI
- Stuckey, 2010, Gas diffusion layers for proton exchange membrane fuel cells using in situ modified carbon papers with multi-walled carbon nanotubes nanoforest, Fuel Cell, 10, 369, 10.1002/fuce.200900141 · DOI
- Gao, 2010, Carbon nanotubes based gas diffusion layers in direct methanol fuel cells, Energy, 35, 1455, 10.1016/j.energy.2009.11.031 · doi:10.1016/j.energy.2009.11.031
- Wei, 2020, An ultra-thin, flexible, low-cost and scalable gas diffusion layer composed of carbon nanotubes for high-performance fuel cells, J Mater Chem, 8, 5986, 10.1039/C9TA13944C · DOI
- Fontana, 2021, Direct growth of carbon nanotubes forests on carbon fibers to replace microporous layers in proton exchange membrane fuel cells, Carbon, 172, 762, 10.1016/j.carbon.2020.10.049 · DOI
- Wilson, 1992, Thin-film catalyst layers for polymer electrolyte fuel cell electrodes, J Appl Electrochem, 22, 1, 10.1007/BF01093004 · DOI · Paper page
- Sim, 2021, Effects of basic gas diffusion layer components on PEMFC performance with capillary pressure gradient, Int J Hydrogen Energy, 46, 27731, 10.1016/j.ijhydene.2021.05.205 · doi:10.1016/j.ijhydene.2021.05.205
- Swamy, 2010, Characterization of interfacial structure in PEFCs: water storage and contact resistance model, J Electrochem Soc, 157, B77, 10.1149/1.3247585 · DOI
- Kulikovsky, 2022, Ananlytical impendance of PEM fuel cell cathode including oxygen transport in the channel, gas diffusion and catalyst layers, J Electrochem Soc, 169, 10.1149/1945-7111/ac5d97 · doi:10.1149/1945-7111/ac5d97
- Syarif, 2022, Gas diffusion layer from binchotan carbon and its electrochemical properties for supporting electrocatalyst in fuel cell, AIMS Energy, 10, 292, 10.3934/energy.2022016 · DOI
- Cruz-Manzo, 2021, Analytical Warburg impedance model for EIS analysis of the gas diffusion layer with oxygen depletion in the air channel of a PEMFC, J Electrochem Soc, 168, 1, 10.1149/1945-7111/ac1031 · DOI
- Latorrata, 2018, Use of electrochemical impedance spectroscopy for the evaluation of performance of PEM fuel cells based on carbon cloth gas diffusion electrodes, J Spectrosc, 10.1155/2018/3254375 · DOI
- Chen, 2020, Roll-to-roll stack and lamination of gas diffusion layer in multilayer structured membrane electrode assembly, Proc IME B J Eng Manufact, 234, 66, 10.1177/0954405419862090 · DOI
- Li, 2022, Study on preparation process and durability of gas diffusion layer of proton exchange membrane fuel cell, Ionics
- Zeis, 2015, Materials and characterization techniques for high-temperature polymer electrolyte membrane fuel cells, Beilstein J Nanotechnol, 6, 68, 10.3762/bjnano.6.8 · DOI · Paper page
- Li, 2021, Water management characteristics of electrospun micro-porous layer in PEMFC under normal temperature and cold start conditions, Int J Hydrogen Energy, 46, 11150, 10.1016/j.ijhydene.2020.05.271 · doi:10.1016/j.ijhydene.2020.05.271
- Balakrishnan, 2020, Designing tailored gas diffusion layers with pore size gradients via electrospinning for polymer electrolyte membrane fuel cells, ACS Appl Energy Mater, 3, 2695, 10.1021/acsaem.9b02371 · DOI
- Wei, 2019, Multiple-jet needleless electrospinning approach via a linear flume spinneret, Polymers, 11, 1, 10.3390/polym11122052 · doi:10.3390/polym11122052
- Mo, 2016, Additive manufacturing of liquid/gas diffusion layers for low-cost and high-efficiency hydrogen production, Int J Hydrogen Energy, 41, 3128, 10.1016/j.ijhydene.2015.12.111 · DOI
- Svendby, 2021, The use of additive manufactured inconel 625 as bipolar plate for the high temperature proton electrolyte membrane fuel cell, Procedia Struct Integr, 34, 51, 10.1016/j.prostr.2021.12.008 · DOI
- Jayakumar, 2018, An assessment on additive manufacturing technique to fabricate integral PEM fuel cell/electrolyser component, MATEC Web Conf, 172, 10.1051/matecconf/201817204005 · DOI
- Rohendi, 2014, Effect of PTFE content and sintering temperature on the properties of a fuel cell electrode backing layer, J Fuel Cell Sci Technol, 11, 1, 10.1115/1.4026932 · doi:10.1115/1.4026932
- Borisov, 2017, 49, 179
- Orogbemi, 2018, Through-plane gas permeability of gas diffusion layers and microporous layer: effects of carbon loading and sintering, J Energy Inst, 91, 270, 10.1016/j.joei.2016.11.008 · doi:10.1016/j.joei.2016.11.008
- Forner-Cuenca, 2016, Advanced water management in PEFCs: diffusion layers with patterned wettability, J Electrochem Soc, 163, F788, 10.1149/2.0271608jes · DOI
- 2018, SGL, Hyundai expand cooperation in fuel cell components for NEXO, Fuel Cell Bull, 2018, 15, 10.1016/S1464-2859(18)30182-2 · doi:10.1016/s1464-2859(18)30182-2
- Son J, Um S, Kim Y.B. Numerical analysis of the effect of anisotropic gas diffusion layer permeability on polymer electrolyte membrane fuel cell performance with various channel types. Fuel, 289, p.119888. · DOI
- Fu X, Wen Q, Han J, Wei J, Li Y, Ning F, Zhou X. One-step to prepare high-performance gas diffusion layer (GDL) with three different functional layers for proton exchange membrane fuel cells (PEMFCs). Int J Hydrogen Energy, 47(61), pp.25769-25779. · DOI
- Okereke IC, Ismail MS, Ingham D, Hughes KJ, Ma L, Pourkashanian M. The effects of GDL anisotropic transport properties on the PEFC performance. Int J Numer Methods Heat Fluid Flow 2022 (in press). · DOI
- Chang PC, Chang Y., Wang W., Lo FY, Lin WC. Visualizing hydrogen diffusion in magnetic film through magneto-optical Kerr effect. Commun Chem, 2(1), pp.1-8. · doi:10.1038/s42004-019-0189-1
- Yin Y, Qu Z, Zhu C, Zhang J. Visualizing gas diffusion behaviors in three-dimensional nanoporous media. Energy Fuel, 35(3), pp.2075-2086. · DOI
- Litster S, Sinton D, Djilali N. Ex situ visualization of liquid water transport in PEM fuel cell gas diffusion layers. J Power Sources, 154(1), pp.95-105. · DOI
- Nasu, 2022, Neutron imaging of generated water inside polymer electrolyte fuel cell using newly-developed gas diffusion layer with gas flow channels during power generation, J Power Sources, 530, 10.1016/j.jpowsour.2022.231251 · doi:10.1016/j.jpowsour.2022.231251
- Pang, 2022, Convolutional neural network analysis of radiography images for rapid water quantification in PEM fuel cell, Appl Energy, 321, 10.1016/j.apenergy.2022.119352 · DOI
Cited by
Song, Y., Guo, Z., Yin, J., Liu, M., Tolj, I., Grigoriev, S. A., Ge, M., & Sun, C. (2025) · Polymers · doi:10.3390/polym17162181 · Cited by 28
Metadata
- Authors
- Athanasaki, G., Jayakumar, A., & Kannan, A. M.
- Venue
- International Journal of Hydrogen Energy
- Publisher
- Elsevier BV
- Published
- 2023-01
- Volume
- 48
- Issue
- 6
- Pages
- 2294-2313
- ISSN
- 0360-3199 (ISSN-L)
- OpenAlex
- W4308487736
- Cited by
- 180
- References
- 4
- FWCI
- 8.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Gas diffusion layers for PEM fuel cells: Materials, properties and manufacturing – A review. https://app.cochat.ai/papers/10.1016/j.ijhydene.2022.10.058
- The paper
- Athanasaki, G., Jayakumar, A., & Kannan, A. M. (2023). Gas diffusion layers for PEM fuel cells: Materials, properties and manufacturing – A review. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2022.10.058
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.