The DOI matches its Crossref record.
Tool-life and wear mechanisms of CBN tools in machining of Inconel 718
Open accessAbstract
The demand for increasing productivity when machining heat resistant alloys has resulted in the use of new tool materials such as cubic boron nitride (CBN) or ceramics. However, CBN tools are mostly used by the automotive industry in hard turning, and the wear of those tools is not sufficiently known in aerospace materials. In addition, the grade of these tools is not optimized for superalloys due to these being a small part of the market, although expanding (at 20% a year). So this investigation has been conducted to show which grade is optimal and what the wear mechanisms are during finishing operations of Inconel 718. It is shown that a low CBN content with a ceramic binder and small grains gives the best results. The wear mechanisms on the rake and flank faces were investigated. Through SEM observations and chemical analysis of the tested inserts, it is shown that the dominant wear mechanisms are adhesion and diffusion due to chemical affinity between elements from workpiece and insert.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Tool wear characteristics in machining of nickel-based superalloys
Zhu, D., Zhang, X., & Ding, H. (2013) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.08.001 · Cited by 580
High performance cutting of advanced aerospace alloys and composite materials
M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., Kappmeyer, G., Engin, S., & Sim, W.-M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.002 · Cited by 567
Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
Pervaiz, S., Rashid, A., Deiab, I., & Nicolescu, M. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2014.880460 · Cited by 276
State-of-The-Art Cooling and Lubrication for Machining Inconel 718
De Bartolomeis, A., Newman, S. T., Biermann, D., & Shokrani, A. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047842 · Cited by 43
“However, the wear mechanism is greatly influenced by the cutting tool material, coating, and cutting parameters [38-46].”
Background
Metadata
- Authors
- Costes, J. P., Guillet, Y., Poulachon, G., & Dessoly, M.
- Venue
- International Journal of Machine Tools and Manufacture
- Publisher
- Elsevier BV
- Published
- 2007-06
- Volume
- 47
- Issue
- 7-8
- Pages
- 1081-1087
- ISSN
- 0890-6955 (ISSN-L)
- OpenAlex
- W2039543545
- Cited by
- 240
- References
- 0
- FWCI
- 4.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tool-life and wear mechanisms of CBN tools in machining of Inconel 718. https://app.cochat.ai/papers/10.1016/j.ijmachtools.2006.09.031
- The paper
- Costes, J. P., Guillet, Y., Poulachon, G., & Dessoly, M. (2007). Tool-life and wear mechanisms of CBN tools in machining of Inconel 718. International Journal of Machine Tools and Manufacture. https://doi.org/10.1016/j.ijmachtools.2006.09.031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.