The DOI matches its Crossref record; 213 of the 213 references it cites were found in a registry or an index.
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Abstract
Abstract Aerospace is a key market driver for the advancement of additive manufacturing (AM) due to the huge demands in high-mix low-volume production of high-value parts, integrated complex part geometries and simplified fabrication workflow. Rapid and significant progress has been made in the laser additive manufacturing (LAM) of aeroengine materials, including the advanced high-strength steels, nickel-based superalloys and titanium-based alloys. Despite the extensive investigation of these three families of materials by the research community, there is a lack of comprehensive review on LAM of high strength steels, and existing gaps in published reviews on Ti-based alloys and Ni-based superalloys. Furthermore, although emerging materials such as high/medium entropy alloys and heterostructured materials exhibit promising mechanical performance, rigorous characterization, testing, qualification, and certification are still required before actual application in engine parts. Thus, it is still important and relevant to have a deep understanding on the relationship between process parameters – microstructures – mechanical properties in these widely used aeroengine materials, to drive the development of superior high-value alloys. This review aims to provide a critical and in-depth evaluation of laser powder bed fusion (LPBF) and laser directed energy deposition (LDED) technologies of the mentioned aeroengine materials. The review will summarize the material properties, performance envelops and outlines the research gaps of these aeroengine materials. Furthermore, perspectives on research opportunities, materials development, and new R&D approaches of LAM for the aeroengine materials are also highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Suresh, S. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511806575 · Cited by 4,526
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Metal Fatigue in Engineering (1980)
Fuchs, H. O., Stephens, R. I., & Saunders, H. (1981) · Journal of Engineering Materials and Technology · doi:10.1115/1.3225026 · Cited by 1,933
Deep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Donachie, M. J. (1988) · Cited by 1,662
Cited by
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Review on field assisted metal additive manufacturing
Tan, C., Li, R., Su, J., Du, D., Du, Y., Attard, B., Chew, Y., Zhang, H., Lavernia, E. J., Fautrelle, Y., et al. (2023) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2023.104032 · Cited by 377
Self-citation
Metadata
- Authors
- Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G.
- Venue
- International Journal of Machine Tools and Manufacture
- Publisher
- Elsevier BV
- Published
- 2021-11
- Volume
- 170
- Pages
- 103804
- ISSN
- 0890-6955 (ISSN-L)
- OpenAlex
- W3204186848
- Cited by
- 520
- References
- 213
- FWCI
- 28.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Progress and perspectives in laser additive manufacturing of key aeroengine materials. https://app.cochat.ai/papers/10.1016/j.ijmachtools.2021.103804
- The paper
- Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021). Progress and perspectives in laser additive manufacturing of key aeroengine materials. International Journal of Machine Tools and Manufacture. https://doi.org/10.1016/j.ijmachtools.2021.103804
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.