The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Quasi-static large deformation compressive behaviour of origami-based metamaterials
Abstract
Abstract An analytical model of the quasi-static response of Miura-ori based metamaterial to in-plane compression was first developed to describe the major mechanical characteristics related to the strength and energy absorption capacity of this material in the analysed loading direction. It is assumed that the base material is ductile and can be approximated as a perfectly plastic material. The results revealed that the initial strength and densification strain of the Miura-ori based metamaterial cannot be uniquely defined by its relative density, in contrast to most conventional cellular materials used for energy absorption applications. A particular value of the initial folding angle γ0 corresponds to the minimum relative density for each static sector angle α. This value determines the transition point separating the region where the initial material strength increases with the increase of the relative density from the one where this strength decreases with the increase of the relative density. Miura-ori based metamaterials with large initial dihedral angle γ0 have larger energy absorption capacity per unit mass, however exhibiting significant variations of Poisson's ratios during compression. The energy absorption efficiency of the Miura-ori based metamaterials was compared with that of single-walled regular honeycombs under in-plane compression. It is demonstrated that, for certain combination of the geometric parameters a, b, α and γ0, the origami-based materials can outperform the honeycombs with the same relative density. The analytical model was verified by the numerical simulations of the response of single cells with various geometries and multi-sheet origami configurations. The model predictions were also validated by a quasi-static compression test of a four-sheet origami specimen.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Using origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Cited by
Ha, N. S., & Lu, G. (2020) · Thin-Walled Structures · doi:10.1016/j.tws.2020.106995 · Cited by 397
Self-citationMechanical metamaterials based on origami and kirigami
Zhai, Z., Wu, L., & Jiang, H. (2021) · Applied Physics Reviews · doi:10.1063/5.0051088 · Cited by 279
A Review on Origami Simulations: From Kinematics, To Mechanics, Toward Multiphysics
Zhu, Y., Schenk, M., & Filipov, E. T. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055031 · Cited by 144
Metadata
- Authors
- Zhang, J., Karagiozova, D., You, Z., Chen, Y., & Lu, G.
- Venue
- International Journal of Mechanical Sciences
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 153-154
- Pages
- 194-207
- ISSN
- 0020-7403 (ISSN-L)
- OpenAlex
- W2913944174
- Cited by
- 172
- References
- 1
- FWCI
- 8.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.