The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
Open accessAbstract
Three-dimensional printing (3DP) has the potential to cause a paradigm shift in the manufacture of pharmaceuticals, enabling personalised medicines to be produced on-demand. To facilitate integration into healthcare, non-destructive characterisation techniques are required to ensure final product quality. Here, the use of process analytical technologies (PAT), including near infrared spectroscopy (NIR) and Raman confocal microscopy, were evaluated on paracetamol-loaded 3D printed cylindrical tablets composed of an acrylic polymer (Eudragit L100-55). Using a portable NIR spectrometer, a calibration model was developed, which predicted successfully drug concentration across the range of 4–40% w/w. The model demonstrated excellent linearity (R2 = 0.996) and accuracy (RMSEP = 0.63%) and results were confirmed with conventional HPLC analysis. The model maintained high accuracy for tablets of a different geometry (torus shapes), a different formulation type (oral films) and when the polymer was changed from acrylic to cellulosic (hypromellose, HPMC). Raman confocal microscopy showed a homogenous drug distribution, with paracetamol predominantly present in the amorphous form as a solid dispersion. Overall, this article is the first to report the use of a rapid ‘point-and-shoot’ approach as a non-destructive quality control method, supporting the integration of 3DP for medicine production into clinical practice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Smoothing and Differentiation of Data by Simplified Least Squares Procedures.
Savitzky, A., & Golay, M. J. E. (1964) · Analytical Chemistry · doi:10.1021/ac60214a047 · Cited by 21,904
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
Self-citationVakili, H., Wickström, H., Desai, D., Preis, M., & Sandler, N. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.04.014 · Cited by 53
Cited by
Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Bhujbal, S. V., Mitra, B., Jain, U., Gong, Y., Agrawal, A., Karki, S., Taylor, L. S., Kumar, S., & (Tony) Zhou, Q. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.05.014 · Cited by 556
3D Printing as a Promising Tool in Personalized Medicine
Vaz, V. M., & Kumar, L. (2021) · AAPS PharmSciTech · doi:10.1208/s12249-020-01905-8 · Cited by 409
Connected healthcare: Improving patient care using digital health technologies
Awad, A., Trenfield, S. J., Pollard, T. D., Ong, J. J., Elbadawi, M., McCoubrey, L. E., Goyanes, A., Gaisford, S., & Basit, A. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113958 · Cited by 405
Self-citation3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Self-citation
Metadata
- Authors
- Trenfield, S. J., Goyanes, A., Telford, R., Wilsdon, D., Rowland, M., Gaisford, S., & Basit, A. W.
- Venue
- International Journal of Pharmaceutics
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 549
- Issue
- 1-2
- Pages
- 283-292
- ISSN
- 0378-5173 (ISSN-L)
- OpenAlex
- W2886069121
- Cited by
- 172
- References
- 3
- FWCI
- 10.95
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach. https://app.cochat.ai/papers/10.1016/j.ijpharm.2018.08.002
- The paper
- Trenfield, S. J., Goyanes, A., Telford, R., Wilsdon, D., Rowland, M., Gaisford, S., & Basit, A. W. (2018). 3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach. International Journal of Pharmaceutics. https://doi.org/10.1016/j.ijpharm.2018.08.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.