The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Probing the phase transformation and dislocation evolution in dual-phase high-entropy alloys
Open accessAbstract
Some high-entropy alloys, which contain two or more component phases with highly different properties, can achieve an outstanding combination of high strength and high ductility, and even break in the strength-ductility trade-off. However, a detailed atomic-scale mechanism of the dynamic continuous microstructural evolution has not hitherto been performed, to limit the achievement of bulk dual-phase high-entropy alloys with the improved strength and toughness. Here we report the deformation and plasticity as well as strength in the dual-phase nanocrystalline high-entropy alloys with a variable volume fraction of face-centered-cube (FCC) and hexagonal closed-packed (HCP) phases using atomistic simulations during the tensile-straining tests. The results show that the amplitudes of additional interaction stresses and strains rely on such factors as the differences in the mechanical property and volume fraction of each phase. Due to the complexity of the phase and phase boundary, the mechanical properties of the dual-phase nanocrystalline high-entropy alloys, in general, cannot be accurately estimated on the basis of the simple mixed laws, which are dependent upon the volume fraction and yielding strength of individual phase. The aim of this study is to describe how the phase volume fractions affect the mechanical properties in the dual-phase high-entropy alloys. The flow stress and work hardening of the dual-phase high-entropy alloys can be explained on the basis of the mobile dislocation density and dislocation-induced phase transformation in the corresponding phases. The HCP-based high-entropy alloys show the good plasticity and high strength, and are unlike traditional alloys with the low ductility, owing to the occurrence of the HCP to FCC phase transformation. The strength of the dual-phase high-entropy alloy with the 16.7% FCC-phase volume fraction exceeds that of HCP-based or FCC-based matrix, due to the stronger interface hardening. We expect that these results would be helpful for designing and selecting dual-phase high-entropy alloys with great strength and good ductility in various engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
The Elastic Behaviour of a Crystalline Aggregate
Hill, R. (1952) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/65/5/307 · Cited by 11,503
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationLANDAU, L. D., & LIFSHITZ, E. M. (1951) · Cited by 5,903
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819
Deformation twinning in nanocrystalline materials
Zhu, Y. T., Liao, X. Z., & Wu, X. L. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.05.001 · Cited by 1,373
Curtze, S., & Kuokkala, V.-T. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.05.049 · Cited by 866
Deformation-mechanism map for nanocrystalline metals by molecular-dynamics simulation
Yamakov, V., Wolf, D., Phillpot, S. R., Mukherjee, A. K., & Gleiter, H. (2004) · Nature Materials · doi:10.1038/nmat1035 · Cited by 847
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Choi, W.-M., Jo, Y. H., Sohn, S. S., Lee, S., & Lee, B.-J. (2018) · npj Computational Materials · doi:10.1038/s41524-017-0060-9 · Cited by 794
Polysynthetic twinned TiAl single crystals for high-temperature applications
Chen, G., Peng, Y., Zheng, G., Qi, Z., Wang, M., Yu, H., Dong, C., & Liu, C. T. (2016) · Nature Materials · doi:10.1038/nmat4677 · Cited by 786
A high-specific-strength and corrosion-resistant magnesium alloy
Xu, W., Birbilis, N., Sha, G., Wang, Y., Daniels, J. E., Xiao, Y., & Ferry, M. (2015) · Nature Materials · doi:10.1038/nmat4435 · Cited by 778
Li, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Self-citationStrong crystal size effect on deformation twinning
Yu, Q., Shan, Z.-W., Li, J., Huang, X., Xiao, L., Sun, J., & Ma, E. (2010) · Nature · doi:10.1038/nature08692 · Cited by 673
Self-citationDual-phase nanostructuring as a route to high-strength magnesium alloys
Wu, G., Chan, K.-C., Zhu, L., Sun, L., & Lu, J. (2017) · Nature · doi:10.1038/nature21691 · Cited by 672
Taşan, C. C., Hoefnagels, J. P. M., Diehl, M., Yan, D., Roters, F., & Raabe, D. (2014) · International Journal of Plasticity · doi:10.1016/j.ijplas.2014.06.004 · Cited by 572
High-Entropy Alloys: Fundamentals and Applications
Gao (2016) · Cited by 561
Ma, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
Bhattacharjee, P. P., Sathiaraj, G. D., Zaid, M., Gatti, J. R., Lee, C., Tsai, C.-W., & Yeh, J.-W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.237 · Cited by 530
Stacking fault energies of face-centered cubic concentrated solid solution alloys
Zhao, S., Stocks, G. M., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.001 · Cited by 495
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
Tang, Z., Yuan, T., Tsai, C.-W., Yeh, J.-W., Lundin, C. D., & Liaw, P. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.004 · Cited by 450
Self-citationLi, Z., Körmann, F., Grabowski, B., Neugebauer, J., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.023 · Cited by 397
Magnetically-driven phase transformation strengthening in high entropy alloys
Niu, C., LaRosa, C. R., Miao, J., Mills, M. J., & Ghazisaeidi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-03846-0 · Cited by 393
Ji, W., Wang, W., Wang, H., Zhang, J., Wang, Y., Zhang, F., & Fu, Z. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.08.008 · Cited by 386
High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces
Zheng, S., Beyerlein, I. J., Carpenter, J. S., Kang, K., Wang, J., Han, W., & Mara, N. A. (2013) · Nature Communications · doi:10.1038/ncomms2651 · Cited by 357
Wang, J., Zeng, Z., Weinberger, C. R., Zhang, Z., Zhu, T., & Mao, S. X. (2015) · Nature Materials · doi:10.1038/nmat4228 · Cited by 338
Ming, K., Bi, X., & Wang, J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.10.005 · Cited by 330
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
Polymorphism in a high-entropy alloy
Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., et al. (2017) · Nature Communications · doi:10.1038/ncomms15687 · Cited by 329
Self-citationStructure-property relationships from universal signatures of plasticity in disordered solids
Cubuk, E. D., Ivancic, R. J. S., Schoenholz, S. S., Strickland, D. J., Basu, A., Davidson, Z. S., Fontaine, J., Hor, J. L., Huang, Y.-R., Jiang, Y., et al. (2017) · Science · doi:10.1126/science.aai8830 · Cited by 320
Self-citationZhang, Y. H., Zhuang, Y., Hu, A., Kai, J. J., & Liu, C. T. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.11.014 · Cited by 313
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual‐Phase High‐Entropy Alloys
Lu, W., Liebscher, C. H., Dehm, G., Raabe, D., & Li, Z. (2018) · Advanced Materials · doi:10.1002/adma.201804727 · Cited by 288
Ramazani, A., Mukherjee, K., Schwedt, A., Goravanchi, P., Prahl, U., & Bleck, W. P. (2012) · International Journal of Plasticity · doi:10.1016/j.ijplas.2012.11.003 · Cited by 264
Transformation induced softening and plasticity in high entropy alloys
Li, J., Fang, Q., Liu, B., & Liu, Y. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.002 · Cited by 243
Self-citationMechanical properties of alloys consisting of two ductile phases
Ankem, S., Margolin, H., GREENE, C., Neuberger, B. W., & Oberson, P. G. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.10.003 · Cited by 200
Feng, X. B., Zhang, J. Y., Wang, Y. Q., Hou, Z. Q., Wu, K., Liu, G., & Sun, J. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.04.013 · Cited by 166
Hybrid nanostructured aluminum alloy with super-high strength
Wang, Z., Qu, R. T., Scudino, S., Sun, B. A., Prashanth, K. G., Louzguine, D. V., Chen, M., Zhang, Z. F., & Eckert, J. (2015) · NPG Asia Materials · doi:10.1038/am.2015.129 · Cited by 101
Li, Z., & Raabe, D. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.04.050 · Cited by 95
Guo, L., Xiao, D., Wu, W., Ni, S., & Song, M. J. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.09.011 · Cited by 79
Applications of Special Quasi-random Structures to High-Entropy Alloys
Gao, M. C., Niu, C., Jiang, C., & Irving, D. L. (2016) · Springer eBooks · doi:10.1007/978-3-319-27013-5_10 · Cited by 76
Self-citationAlekseeva, S., Fanta, A. B. D. S., Iandolo, B., Antosiewicz, T. J., Nugroho, F. A. A., Wagner, J. B., Burrows, A. D., Zhdanov, V. P., & Langhammer, C. (2017) · Nature Communications · doi:10.1038/s41467-017-00879-9 · Cited by 72
High hardness in the biocompatible intermetallic compound β-Ti 3 Au
Svanidze, E., Besara, T., Ozaydin, M. F., Tiwary, C. S., Wang, J. K., Radhakrishnan, S., Mani, S. A., Xin, Y., Han, K., Liang, H. Y., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600319 · Cited by 68
Song, R., Wei, L., Yang, C., & Wu, S. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.029 · Cited by 63
Experimental determination of latent hardening coefficients in FeMnNiCoCr
Wu, Y., Bönisch, M., Alkan, S., Abuzaid, W. Z., & Şehitoğlu, H. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.02.016 · Cited by 55
The Gaussian distribution of lattice size and atomic level heterogeneity in high entropy alloys
Liu, S., & Wei, Y. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.007 · Cited by 43
Cited by
Chen, S., Oh, H. S., Gludovatz, B., Kim, S. J., Park, E. S., Zhang, Z., Ritchie, R. O., & Yu, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-14641-1 · Cited by 424
Metadata
- Authors
- Fang, Q., Chen, Y., Li, J., Jiang, C., Liu, B., Liu, Y., & Liaw, P. K.
- Venue
- International Journal of Plasticity
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 114
- Pages
- 161-173
- ISSN
- 0749-6419 (ISSN-L)
- OpenAlex
- W2898972986
- Cited by
- 334
- References
- 49
- FWCI
- 13.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.