The optimum grain size for strength-ductility combination in metals
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A strength-ductility trade-off usually occurs when grains are refined to increase strength. A question arises on if there exists a grain size for the best strength-ductility combination, i.e., with the highest possible strain energy density limit and strength simultaneously. This issue is crucial for guiding the design of strong and tough structural materials. Here we reveal an optimum grain size ( d optimum ) on the order of a few micrometers, at which the strain energy density limit, estimated as the product of strength and uniform elongation, reaches a maximum while maintaining reasonably high yield strength. The d optimum is found to exist in a series of single-phase FCC, BCC and HCP materials, indicating it as a universal phenomenon. Theoretical models on the grain size-dependence of uniform elongation and ultimate strength are developed by considering dislocation accumulation in grain boundary affected region (Gbar) and grain interior based on the classical Kocks-Mecking-Estrin model. Combined with the Hall-Petch relationship, the models accurately predict the d optimum . Importantly, the models disclose this d optimum to be close to twice of the characteristic width of Gbar ( l Gbar ), suggesting that it is exactly at or near the critical grain size with the strongest intragranular strain gradient effects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989 · cited 2×
“Good ductility originates from high work hardening capability, which helps to resist strain localization and consequently prevent catastrophic failure (Ritchie, 2011; Zhu and Wu, 2018).”
Metadata
- Authors
- Wang, Y., Huang, C., Ma, X., Zhao, J., Guo, F., Fang, X., Zhu, Y., & Wei, Y.
- Venue
- International Journal of Plasticity
- Publisher
- Elsevier BV
- Published
- 2023-05
- Volume
- 164
- Pages
- 103574
- ISSN
- 0749-6419 (ISSN-L)
- OpenAlex
- W4322505835
- Cited by
- 167
- References
- 1
- FWCI
- 11.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The optimum grain size for strength-ductility combination in metals. https://app.cochat.ai/papers/10.1016/j.ijplas.2023.103574
- The paper
- Wang, Y., Huang, C., Ma, X., Zhao, J., Guo, F., Fang, X., Zhu, Y., & Wei, Y. (2023). The optimum grain size for strength-ductility combination in metals. International Journal of Plasticity. https://doi.org/10.1016/j.ijplas.2023.103574
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.