The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
A critical review of diamond like carbon coating for wear resistance applications
Abstract
In recent years innovation in carbon based materials have encouraged both researchers as well as industrialists to develop materials/composites with improved tribological properties. Researchers have been fascinated to develop diamond like carbon (DLC) or carbon nanotubes (CNTs) reinforced coatings to their good corrosion resistance, excellent wear resistance, good adhesion strength, and self -lubricious nature. The present review article is mainly focused on various techniques employed in order to process DLC/CNTs coatings as well as provide a summary of DLC/CNTs deposition on different substrates. The present study includes major types, properties and tribological behavior of carbon based materials and mechanisms involved in coating deposition. The study also discusses that deposition of DLC/CNTs coatings on the substrate materials enhances the wear, corrosion and mechanical properties of the substrate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Robertson, J. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00005-0 · Cited by 6,206
Dorri Moghadam, A., Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.03.014 · Cited by 906
Corrosion studies of carbon nanotubes–Zn composite coating
Praveen, B. M., Venkatesha, T. V., Arthoba Naik, Y., & Prashantha, K. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.10.034 · Cited by 186
Voevodin, A. A., Walck, S. D., & Zabinski, J. S. (1997) · Wear · doi:10.1016/s0043-1648(96)07425-x · Cited by 180
Karslıoğlu, R., & Akbulut, H. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.06.161 · Cited by 116
Stallard, J., Mercs, D., Jarratt, M., Teer, D. G., & Shipway, P. H. (2003) · Surface and Coatings Technology · doi:10.1016/s0257-8972(03)00925-3 · Cited by 89
Hatem, A., Lin, J., Wei, R., Torres, R. D., Laurindo, C. A. H., & Junior, P. C. S. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.07.004 · Cited by 70
Application of diamond-like carbon coatings to elastomers frictional surfaces
Martínez, L., Nevshupa, R. A., Álvarez, L., et al. (2008) · Tribology International · doi:10.1016/j.triboint.2008.06.016 · Cited by 30
Ren, S., Huang, J., Cui, M., Pu, J., & Wang, L. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.12.159 · Cited by 27
DLC coating on a trench-shaped target by bipolar PBII
Hirata, Y., Kato, T., & Choi, J. (2014) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2014.08.005 · Cited by 26
Cited by
High Density Lithium Niobate Photonic Integrated Circuits
Li, Z., Wang, R. N., Lihachev, G., Zhang, J., Tan, Z., Churaev, M., Kuznetsov, N., Siddharth, A., Bereyhi, M. J., Riemensberger, J., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-40502-8 · Cited by 169
“…of diamond, in terms of hardness, elastic modulus, and chemical inertness, but is amorphous and can be deposited at low cost as a thin fi lm. Today, DLC is ubiquitously used as a protective coating 33,34 for magnetic read heads 35 , medical devices, razor blades or MEMS 40 um sensors 36,37 .”
Metadata
- Authors
- Tyagi, A., Walia, R. S., Murtaza, Q., Pandey, S. M., Tyagi, P. K., & Bajaj, B.
- Venue
- International Journal of Refractory Metals and Hard Materials
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 78
- Pages
- 107-122
- ISSN
- 0263-4368 (ISSN-L)
- OpenAlex
- W2889981457
- Cited by
- 254
- References
- 10
- FWCI
- 14.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.