The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Condensed tannins from grape pomace: Characterization by FTIR and MALDI TOF and production of environment friendly wood adhesive
Open accessAbstract
Abstract Condensed tannins were extracted from grape pomace using a water medium in presence of three different bases as catalyst (NaOH, Na 2 CO 3 or NaHCO 3 ) and were characterized by FT-IR and MALDI-TOF spectrometry. It was demonstrated that the tannin extracts contained oligomers up to 6 repeating flavonoid units, with dominant procyanidin with a minor amount of prodelphinidin units. The structure of grape pomace tannin extracted did not present noticeable discrepancy exception of the ratio of the opening pyran ring which was different as a function of the catalyst used. Two different formulations (nonfortified tannin adhesive and fortified with addition of 20% of polymeric 4,4′-diphenyl methane diisocyanate (pMDI)) were used to press one layer particle board. It has been proved that the extraction processes largely affect the adhesive properties of the extracts obtained from the same raw material. Especially the particleboards prepared from tannins extracted using Na 2 CO 3 as catalyst and without pMDI, give a high internal bonding value (IB = 0.45 MPa), which was good enough to pass relevant international standard specifications for interior grade panels. Formaldehyde emission of these panels is very low, well under the European Norm requirements (≤6.5 mg/100 g panel).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Spigno, G., & De Faveri, D. M. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2005.11.020 · Cited by 325
Cited by
Review on tannins: Extraction processes, applications and possibilities
Das, A. K., Islam, M. N., Faruk, M. O., Ashaduzzaman, M., & Dungani, R. (2020) · South African Journal of Botany · doi:10.1016/j.sajb.2020.08.008 · Cited by 432
Application of Fourier Transform Infrared (FTIR) Spectroscopy in the Characterization of Tannins
Ricci, A., Olejar, K. J., Parpinello, G. P., Kilmartin, P. A., & Versari, A. (2015) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2014.1000461 · Cited by 405
Development of sustainable bio-adhesives for engineered wood panels – A Review
Hemmilä, V., Adamopoulos, S., Karlsson, O., & Kumar, A. (2017) · RSC Advances · doi:10.1039/c7ra06598a · Cited by 397
Naturally occurring phenolic sources: monomers and polymers
Lochab, B., Shukla, S., & Varma, I. K. (2014) · RSC Adv. · doi:10.1039/c4ra00181h · Cited by 293
Grasel, F. D. S., Ferrão, M. F., & Wolf, C. R. (2016) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2015.08.020 · Cited by 269
Metadata
- Authors
- Ping, L., Pizzi, A., Guo, Z. D., & Brosse, N.
- Venue
- Industrial Crops and Products
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 40
- Pages
- 13-20
- ISSN
- 0926-6690 (ISSN-L)
- OpenAlex
- W2057276591
- Cited by
- 197
- References
- 1
- FWCI
- 20.81
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Condensed tannins from grape pomace: Characterization by FTIR and MALDI TOF and production of environment friendly wood adhesive. https://app.cochat.ai/papers/10.1016/j.indcrop.2012.02.039
- The paper
- Ping, L., Pizzi, A., Guo, Z. D., & Brosse, N. (2012). Condensed tannins from grape pomace: Characterization by FTIR and MALDI TOF and production of environment friendly wood adhesive. Industrial Crops and Products. https://doi.org/10.1016/j.indcrop.2012.02.039
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.