The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Kraft lignin as filler in PLA to improve ductility and thermal properties
Open accessAbstract
Abstract Kraft lignin (KL) and acetylated Kraft lignin (AKL) were used as filler for the elaboration of composites with poly(lactic acid) (PLA) in different concentrations (0.5, 1, 5, 10 and 20%) by extrusion method at 200 °C. Characterization of both lignins has been performed using HPLC, FT-IR, GPC, DSC and TGA. KL presented only 0.3% of ash content and molecular weight around 2000 g/mol. The esterification increased the molecular weight and decreases the polydispersity of the lignin (AKL). Also, AKL had lower Tg and higher thermal stability than unmodified Kraft lignin. Lignin content increased the thermal stability of PLA, with the addition of both types of lignins. Contact angle was measured to assess the change in the hydrophobicity of PLA with the addition of lignins. Mechanical properties of different materials were also investigated in order to know the effect of lignin addition in PLA. Maximum strength was not severely affected at low concentrations of both lignins, but it decreased dramatically, especially in composites with 10 and 20% of KL. Elongation at break increased with the addition of low contents of AKL, at high content of both lignins the material becomes quite brittle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
Mansouri, N.-E. E., & Salvadó, J. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.10.002 · Cited by 599
Antioxidant properties of lignin in polypropylene
Pouteau, C., Dole, P., Cathala, B., Avérous, L., & Boquillon, N. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00057-0 · Cited by 434
A Renewable Lignin–Lactide Copolymer and Application in Biobased Composites
Chung, Y.-L., Olsson, J. V., Li, R. J., Frank, C. W., Waymouth, R. M., Billington, S. L., & Sattely, E. S. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc4000835 · Cited by 340
Physicochemical properties of PLA lignin blends
Gordobil, O., Egüés, I., Llano-Ponte, R., & Labidi, J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.002 · Cited by 312
Self-citationKadla, J. F., & Kubo, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.019 · Cited by 293
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Collins, M. N., Nechifor, M., Tanasă, F., Zănoagă, M., McLoughlin, A., Stróżyk, M. A., Culebras, M., & Teacă, C.-A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.069 · Cited by 486
Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials
Yang, H., Yu, B., Xu, X., Bourbigot, S., Wang, H., & Song, P. (2020) · Green Chemistry · doi:10.1039/d0gc00449a · Cited by 461
Spherical lignin particles: a review on their sustainability and applications
Österberg, M., Sipponen, M. H., Mattos, B. D., & Rojas, O. J. (2020) · Green Chemistry · doi:10.1039/d0gc00096e · Cited by 454
Current advancement on the isolation, characterization and application of lignin
Liao, J. J., Latif, N. H. A., Trache, D., Brosse, N., & Hussin, M. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.168 · Cited by 425
Metadata
- Authors
- Gordobil, O., Delucis, R., Egüés, I., & Labidi, J.
- Venue
- Industrial Crops and Products
- Publisher
- Elsevier BV
- Published
- 2015-10
- Volume
- 72
- Pages
- 46-53
- ISSN
- 0926-6690 (ISSN-L)
- OpenAlex
- W1997048455
- Cited by
- 299
- References
- 38
- FWCI
- 7.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Kraft lignin as filler in PLA to improve ductility and thermal properties. https://app.cochat.ai/papers/10.1016/j.indcrop.2015.01.055
- The paper
- Gordobil, O., Delucis, R., Egüés, I., & Labidi, J. (2015). Kraft lignin as filler in PLA to improve ductility and thermal properties. Industrial Crops and Products. https://doi.org/10.1016/j.indcrop.2015.01.055
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.