High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This study examined the surface oxidation properties of Cr-Mn-Fe-Co-Ni high entropy alloy (HEA) at high temperatures (900 °C, 1000 °C, 1100 °C/24 h) in the 21%O2 and 79%N2 atmosphere. An initial observation of microstructures confirmed that they consisted of random FCC solid solution, and the average grain size was measured at 245.5 μm. High-temperature oxidation tests of the Cr-Mn-Fe-Co-Ni HEA showed that its weight gained by 1.76, 4.45, and 9.08 mg/cm2 at 900 °C, 1000 °C, and 1100 °C, respectively, and all three temperature conditions represented typical parabolic curves. Observation of its surface found that Cr2O3 and Mn2O3 were main oxides on a specimen tested at 900 °C, while (Mn, Cr)3O4 and Mn3O4 were mostly shown to be main oxides on a specimen tested at 1000 °C and 1100 °C, despite the presence of Cr2O3. The high-temperature oxidation behavior of Cr-Mn-Fe-Co-Ni HEAs was found to have been largely affected by Cr and Mn elements. The resultant kirkendall pore generation, change in the concentration of elements, internal oxidation and Mn2O3 → Mn3O4 transformation were found to affect the oxidation resistance of Cr-Mn-Fe-Co-Ni high entropy alloy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Cited by
Machine-learning and high-throughput studies for high-entropy materials
Huang, E.-W., Lee, W.-J., Singh, S. S., Kumar, P., Lee, C.-Y., Lam, T.-N., Chin, H.-H., Lin, B.-H., & Liaw, P. K. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100645 · Cited by 165
Metadata
- Authors
- Kim, Y.-K., Joo, Y.-A., Kim, H. S., & Lee, K.-A.
- Venue
- Intermetallics
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 98
- Pages
- 45-53
- ISSN
- 0966-9795 (ISSN-L)
- OpenAlex
- W2799540395
- Cited by
- 211
- References
- 1
- FWCI
- 10.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.