The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties
Abstract
A low-cost Co-free CrFeNi(3-x)Alx (x = 1, 0.9, 0.8, 0.7, 0.6) eutectic high entropy alloy (EHEA) system was designed, successfully prepared and characterized. With the increase of Al content, the alloy dramatically transforms from a hypoeutectic to a hypereutectic microstructure together with an increase in strength and a decrease in ductility. The CrFeNi2.2Al0.8 alloy was found to be an eutectic high entropy alloy and was composed of face centered cubic (FCC) phase and ordered body centered cubic (B2) phase. The hypereutectic CrFeNi2Al alloy shows excellent mechanical properties with an ultimate strength of 1357 MPa and a total elongation of 6.4% at the cast condition. The excellent mechanical properties of this EHEA system can be attributed to the nanolamellar microstructure and suggests a great potential application in the engineering field. We also propose a simple strategy to design Co-free EHEAs and predict more than ten potential Co-free EHEAs to guide experimental searches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J.-W. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,786
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,737
He, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Wu, X., & Zhu, Y. T. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1343208 · Cited by 1,410
Lu, Y., Gao, X., Jiang, L., Chen, Z., Wang, T., Jie, J., Kang, H., Zhang, Y., Guo, S., Ruan, H., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.016 · Cited by 1,125
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Gao, X., Lu, Y., Zhang, B., Liang, N., Wu, G., Sha, G., Liu, J., & Zhao, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.041 · Cited by 887
High-Entropy Alloys: Fundamentals and Applications
Gao (2016) · Cited by 561
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys
Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R., & Stocks, G. M. (2015) · Physical Review X · doi:10.1103/physrevx.5.011041 · Cited by 414
Wani, I. S., Bhattacharjee, T., Sheikh, S., Bhattacharjee, P. P., Guo, S., & Tsuji, N. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.08.048 · Cited by 408
A novel Fe 20 Co 20 Ni 41 Al 19 eutectic high entropy alloy with excellent tensile properties
Jin, X., Zhou, Y., Zhang, L., Du, X., & Li, B. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.01.017 · Cited by 262
Self-citationA multi-component AlCrFe2Ni2 alloy with excellent mechanical properties
Dong, Y., Gao, X., Lu, Y., Wang, T., & Li, T. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.01.096 · Cited by 234
Jin, X., Zhou, Y., Zhang, L., Du, X., & Li, B. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.057 · Cited by 231
Self-citationJiang, L., Cao, Z. Q., Jie, J. C., Zhang, J. J., Lu, Y. P., Wang, T. M., & Li, T. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.185 · Cited by 188
Microstructures and mechanical properties of Co2MoxNi2VWx eutectic high entropy alloys
Jiang, H., Zhang, H., Huang, T., Lu, Y., Wang, T., & Li, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.113 · Cited by 188
Wang, F. J., & Zhang, Y. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.05.020 · Cited by 134
Effects of Nb addition on structural evolution and properties of the CoFeNi2V0.5 high-entropy alloy
Jiang, L., Lu, Y., Dong, Y., Wang, T., Cao, Z., & Li, T. (2015) · Applied Physics A · doi:10.1007/s00339-014-8964-4 · Cited by 115
Seaweed eutectic-dendritic solidification pattern in a CoCrFeNiMnPd eutectic high-entropy alloy
Tan, Y., Li, J., Wang, J., & Kou, H. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.02.004 · Cited by 81
Cited by
Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Promising properties and future trend of eutectic high entropy alloys
Lu, Y., Dong, Y., Jiang, H., Wang, Z., Cao, Z., Guo, S., Wang, T., Li, T., & Liaw, P. K. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.06.022 · Cited by 559
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Uncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system
Wu, Q., Wang, Z., Hu, X., Zheng, T., Yang, Z., He, F., Li, J., & Wang, J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.043 · Cited by 275
Metadata
- Authors
- Jin, X., Bi, J., Zhang, L., Zhou, Y., Du, X., Liang, Y., & Li, B.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 770
- Pages
- 655-661
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2888064467
- Cited by
- 337
- References
- 28
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.