The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy
Abstract
Abstract Refractory high-entropy alloys (RHEAs) are promising high-temperature structural materials due to their high melting point and extraordinarily high yield strength. However, their industrial application is greatly restricted due to their limited room-temperature ductility. In the present investigation, a ductile and strong single-phase NbTaTiV RHEA was synthesized by powder metallurgy method. Effects of the sintering temperature on the phase formation, microstructural evolution and the mechanical properties of the NbTaTiV RHEA were characterized. The results show that the NbTaTiV RHEA sintered at 1700 °C has an equiaxed single bcc phase microstructure, no obvious porosity and compositional segregation can be observed. The alloy exhibits a relatively high hardness of 510 HV, yield strength of 1.37 GPa, and compressive fracture strength of 2.19 GPa with a high fracture strain of 23% at room temperature. Typical strain softening and steady state flow occur during compressive deformation at high temperatures. During deformation at 1000 °C, the alloy still exhibits high yield strength of 437 MPa with a compression strain over than 40%. The outstanding mechanical properties is mainly attributed to the homogeneous and fine microstructures, and solid solution strengthening effect. It can be concluded that the powder metallurgy is a promising way for preparing ductile RHEAs with outstanding comprehensive mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Cited by
High-entropy alloys by mechanical alloying: A review
Vaidya, M., Muralikrishna, G. M., & Murty, B. S. (2019) · Journal of Materials Research · doi:10.1557/jmr.2019.37 · Cited by 492
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Metadata
- Authors
- Guo, W., Liu, B., Liu, Y., Li, T., Fu, A., Fang, Q., & Nie, Y.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 776
- Pages
- 428-436
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2897672275
- Cited by
- 173
- References
- 2
- FWCI
- 7.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy. https://app.cochat.ai/papers/10.1016/j.jallcom.2018.10.230
- The paper
- Guo, W., Liu, B., Liu, Y., Li, T., Fu, A., Fang, Q., & Nie, Y. (2019). Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2018.10.230
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.