The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature
Abstract
The microstructure, hot hardness and oxidation behavior of Al0.6CoCrFeNi high-entropy alloy were investigated. Moreover, the effect of the temperature on the tribological properties of Al0.6CoCrFeNi high-entropy alloy was studied. The results showed that the σ-CrFe phase was precipitated after heat treatment. The hardness of HEAs increased from 278 to 480 HV. The HEAs possessed higher wear resistance than that of the conventional alloys at elevated temperatures. The wear resistance of annealed alloy was nearly 3 times higher than that of GCr15 steel at 600 °C. With increasing temperature, the predominant wear mechanism was transformed from the abrasive wear to the mild oxidative wear as well as delamination wear with increasing the temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Cited by
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Metadata
- Authors
- Chen, M., Lan, L., Shi, X., Yang, H., Zhang, M., & Qiao, J.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 777
- Pages
- 180-189
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2899293651
- Cited by
- 227
- References
- 1
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.