A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Mechanically alloyed (MA) NbMoTaWVCr refractory high-entropy alloy (HEA) powders were sintered by spark plasma sintering (SPS) at temperatures of 1400–1700 °C. The microstructural evolution and mechanical properties of sintered HEAs were subsequently investigated. During the MA process, only a supersaturated body-centered cubic (BCC) structured solid solution was formed. However, C15 Laves phase (Cr,V)2(Ta,Nb) and Ta2VO6 particles were precipitated from the disordered BCC phase during the sintering process at temperatures ≤1500 °C. When the sintering temperature increased to 1600 °C, the Laves phase was transferred to C14 structure and its volume fraction was dramatically reduced. The plasticity of the refractory HEA was strongly affected by the fraction, size and distribution of Laves phase and oxide particles. The NbMoTaWVCr alloy sintered at 1500 °C obtained an excellent combination of yield strength (3416 MPa) and failure plasticity (5.3%) at room temperature. The extraordinary high strength of this HEA could be dominantly attributed to the grain boundary strengthening from the micron-sized BCC phase (1.24 μm), interstitial solid solution strengthening from O in the matrix and the inherent solid solution strengthening in the multi-principal element NbMoTaWVCr alloy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Cited by
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Metadata
- Authors
- Long, Y., Liang, X., Su, K., Peng, H., & Li, X.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 780
- Pages
- 607-617
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2903295454
- Cited by
- 183
- References
- 2
- FWCI
- 8.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties. https://app.cochat.ai/papers/10.1016/j.jallcom.2018.11.318
- The paper
- Long, Y., Liang, X., Su, K., Peng, H., & Li, X. (2019). A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2018.11.318
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.