The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Demystifying the sluggish diffusion effect in high entropy alloys
Abstract
Abstract Interdiffusion studies in Co-Cr-Fe-Mn-Ni, Co-Fe-Mn-Ni, Co-Cr-Fe-Ni, and Co-Cr-Mn-Ni, as well as a reevaluation of the previous results obtained for Al-Co-Cr-Fe-Ni, were conducted. In the experimental part, diffusion couples were annealed at four different temperatures: 1230, 1270, 1310 and 1350 K for each system. Then, the results were evaluated with use of the optimization-based technique, combined with the Miedema's thermodynamic description, what allowed obtaining of tracer diffusion coefficients for all elements in all considered systems. The correctness of the applied approach was tested on the example of Co-Cr-Fe-Mn-Ni system, showing very good agreement of determined tracer diffusivities with the values obtained by other authors. Obtained values of diffusivities were compared with the available data for a number of conventional binary and ternary systems. No signs of diffusion retardation were observed in the absolute temperature scale. In the case of temperature scale normalized with respect to the melting point, an abnormal behavior, previously attributed to the HEAs' sluggish diffusion effect was observed. However, it occurred only for alloys with prominent manganese content and was completely independent of the number of components, being just as likely to occur in binary systems as in HEAs. Therefore, the alleged sluggishness of diffusion in HEAs should be treated just as a result of specific compositions of the previously studied alloys and cannot be generalized for all high entropy systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Reciprocal Relations in Irreversible Processes. I.
Onsager, L. (1931) · Physical Review · doi:10.1103/physrev.37.405 · Cited by 6,660
Reciprocal Relations in Irreversible Processes. II.
Onsager, L. (1931) · Physical Review · doi:10.1103/physrev.38.2265 · Cited by 5,367
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Tong, C.-J., Chen, Y.-L., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,239
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys
Takeuchi, A., & Inoue, A. (2000) · Materials Transactions, JIM · doi:10.2320/matertrans1989.41.1372 · Cited by 882
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating
Huang, P. ‐., Yeh, J. ‐., Shun, T. ‐., & Chen, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300507 · Cited by 841
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
Computational Thermodynamics Aided High-Entropy Alloy Design
Zhang, C., Zhang, F., Chen, S., & Cao, W. (2012) · JOM · doi:10.1007/s11837-012-0365-6 · Cited by 381
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.032 · Cited by 338
Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy
Ng, C., Guo, S., Luan, J., Shi, S., & Liu, C. T. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.07.001 · Cited by 335
Diffusion and the Kirkendall shift in binary alloys
Manning, J. R. (1967) · Acta Metallurgica · doi:10.1016/0001-6160(67)90363-x · Cited by 299
Accelerated exploration of multi-principal element alloys for structural applications
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Calphad · doi:10.1016/j.calphad.2015.04.009 · Cited by 275
Correlation Factors for Diffusion in Nondilute Alloys
Manning, J. R. (1971) · Physical Review B · doi:10.1103/physrevb.4.1111 · Cited by 250
High-Temperature Oxidation Behavior of Al-Co-Cr-Ni-(Fe or Si) Multicomponent High-Entropy Alloys
Butler, T. M., Alfano, J. P., Martens, R. L., & Weaver, M. L. (2015) · JOM · doi:10.1007/s11837-014-1185-7 · Cited by 237
Formation of ordered/disordered nanoparticles in FCC high entropy alloys
Shun, T.-T., Hung, C.-H., & Lee, C.-F. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.12.071 · Cited by 219
Dąbrowa, J., Kucza, W., Cieślak, G., Kulik, T., Danielewski, M., & Yeh, J.-W. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.03.046 · Cited by 208
Self-citationPhase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys
Ng, C., Guo, S., Luan, J., Wang, Q., Lu, J., Shi, S., & Liu, C. T. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.105 · Cited by 175
In the quest of single phase multi-component multiprincipal high entropy alloys
Tazuddin, Gurao, N. P., & Biswas, K. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.383 · Cited by 137
Chen, W., Zhong, J., & Zhang, L. (2016) · MRS Communications · doi:10.1557/mrc.2016.21 · Cited by 88
Understanding of the Elemental Diffusion Behavior in Concentrated Solid Solution Alloys
Zhang, C., Zhang, F., Jin, K., et al. (2017) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-017-0580-5 · Cited by 86
10-nm-thick quinary (AlCrTaTiZr)N film as effective diffusion barrier for Cu interconnects at 900 °C
Chang, S.-Y., & Chen, D.-S. (2009) · Applied Physics Letters · doi:10.1063/1.3155196 · Cited by 67
Computational Study of Atomic Mobility in Co-Fe-Ni Ternary Fcc Alloys
Cui, Y., Jiang, M. F., Ohnuma, I., Oikawa, K., Kainuma, R., & Ishida, K. (2008) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-008-9341-9 · Cited by 44
Cited by
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Metadata
- Authors
- Dąbrowa, J., Zajusz, M., Kucza, W., Cieślak, G., Berent, K., Czeppe, T., Kulik, T., & Danielewski, M.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 783
- Pages
- 193-207
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2906524957
- Cited by
- 339
- References
- 33
- FWCI
- 9.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.