The DOI matches its Crossref record.
AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis
Open accessAbstract
Abstract Graphene has been successfully coated with a nano-Al layer through a novel activating treatment (i.e., organic aluminum reduction method). The nano-Al coated graphene was further processed into AlSi10Mg alloy based composites through a selective laser melting (SLM) process. During the nanocoating of Al on graphene, Al atoms deposited on the graphene through organic aluminum reduction gradually, via nucleation and growth process. There were two primary grain growth patterns: two dimensional (2D) layered growth and three dimensional (3D) island growth, until graphene was coated with Al. The Al-coated graphene was added to the AlSi10Mg alloy, refining the cell, increased the tensile strength, hardness and wear resistance of the alloy. Coating Al on the graphene improved the wetting between graphene and Al, and the addition of Al-coated graphene led to a high nucleation rate, which was responsible for refining the cell. This approach facilitated graphene homogeneous distribution in the Al alloy, the interface between graphene and Al was relatively stable, and the grapheme could pin the dislocation and grain boundary. All these attributes enabled superior mechanical properties to be obtained in the final alloy based nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
An overview of stretchable strain sensors from conductive polymer nanocomposites
Chen, J., Yu, Q., Cui, X., Dong, M., Zhang, J., Wang, C., Fan, J., Zhu, Y., & Guo, Z. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc03655e · Cited by 390
Self-citationZhao, Z., Bai, P., Du, W., Liu, B., Pan, D., Das, R., Liu, C., & Guo, Z. (2020) · Carbon · doi:10.1016/j.carbon.2020.08.040 · Cited by 289
Self-citationZhu, G., Cui, X., Zhang, Y., Chen, S., Dong, M., Liu, H., Shao, Q., Ding, T., Wu, S., & Guo, Z. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.056 · Cited by 258
Self-citationShi, Z., Jia, C., Wang, D., Deng, J., Xu, G., Wu, C., Dong, M., & Guo, Z. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.04.128 · Cited by 96
Self-citation
Metadata
- Authors
- Zhao, Z., Bai, P., Misra, R. D. K., Dong, M., Guan, R., Li, Y., Zhang, J., Tan, L., Gao, J., Ding, T., Du, W., & Guo, Z.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 792
- Pages
- 203-214
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2934380160
- Cited by
- 195
- References
- 0
- FWCI
- 18.70
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis. https://app.cochat.ai/papers/10.1016/j.jallcom.2019.04.007
- The paper
- Zhao, Z., Bai, P., Misra, R. D. K., Dong, M., Guan, R., Li, Y., Zhang, J., Tan, L., Gao, J., Ding, T., Du, W., & Guo, Z. (2019). AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2019.04.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.