The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy
Open accessAbstract
Abstract Understanding the effect of temperature variation on the microstructural evolution is particularly important to refractory high-entropy alloys (RHEAs), given their potential high-temperature applications. Here, we experimentally investigated the grain-growth behavior of the HfNbTaZrTi RHEAs during recrystallization at temperatures from 1,000 to 1,200 °C for varied durations, following cold rolling with a 70% thickness reduction. Following the classical grain-growth kinetics analysis, two activation energies are obtained: 205 kJ/mol between 1,000 and 1,100 °C, and 401 kJ/mol between 1,100 and 1,200 °C, which suggests two mechanisms of grain growth. Moreover, the yield strength – grain size relation was found to be well described by the Hall-Petch relation in the form of σ y = 942 + 270 D − 0.5 . It was revealed that the friction stress, 942 MPa, in the HfNbTaZrTi HEA is higher than that of tungsten alloys, which indicates the high intrinsic stress in the BCC-RHEA. The coefficient, 270 MPa/μm −1/2, is much lower than that in the 316 stainless steel and Al0.3CoCrFeNi HEAs, which indicates low grain-boundary strengthening.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
Cited by
Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces
Yang, T., Zhao, Y. L., Li, W. P., Yu, C. Y., Luan, J. H., Lin, D. Y., Fan, L., Jiao, Z. B., Liu, W. H., Liu, X. J., et al. (2020) · Science · doi:10.1126/science.abb6830 · Cited by 434
Self-citationRefractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
High temperature strength of refractory complex concentrated alloys
Senkov, O. N., Gorsse, S., & Miracle, D. B. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.032 · Cited by 423
Metadata
- Authors
- Chen, S., Tseng, K.-K., Tong, Y., Li, W., Tsai, C.-W., Yeh, J.-W., & Liaw, P. K.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 795
- Pages
- 19-26
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2944127423
- Cited by
- 227
- References
- 1
- FWCI
- 11.86
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy. https://app.cochat.ai/papers/10.1016/j.jallcom.2019.04.291
- The paper
- Chen, S., Tseng, K.-K., Tong, Y., Li, W., Tsai, C.-W., Yeh, J.-W., & Liaw, P. K. (2019). Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy. Journal of Alloys and Compounds. https://doi.org/10.1016/j.jallcom.2019.04.291
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.