The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
A review on WO3 based gas sensors: Morphology control and enhanced sensing properties
Abstract
Abstract Tungsten oxide (WO3), a typical n-type gas-sensing material, has attracted considerable attention to detect various hazardous gases. Previous studies indicated that unique nanostructures are highly related to the sensing performances. So far, great advances have been achieved to design and fabricate diverse WO3 in different dimensional. However, it is still challenging to achieve high performances. To significantly enhance the gas-sensing properties, many strategies have been explored. In this review, the general approaches to tune the morphologies of WO3 are analyzed. Then, much more attention is particularly paid to improve the sensing-properties of WO3 based gas sensors. Firstly, the fundamental of WO3 based gas sensors is described. Secondly, various progresses to control the morphologies in 0-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) WO3 will be reviewed. Thirdly, the efficient strategies for the enhancement of gas-sensing properties based on WO3 will be discussed. Meanwhile, the enhancement mechanisms are taken into account as well. Finally, a perspective on the further development for WO3 synthesis and applications in gas sensors is proposed as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Nanoscale metal oxide-based heterojunctions for gas sensing: A review
Miller, D. R., Akbar, S. A., & Morris, P. A. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.07.074 · Cited by 1,852
Nanostructured Tungsten Oxide – Properties, Synthesis, and Applications
Zheng, H., Ou, J. Z., Strano, M. S., Kaner, R. B., Mitchell, A., & Kalantar‐zadeh, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002477 · Cited by 1,479
Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35335k · Cited by 1,284
SnO2: A comprehensive review on structures and gas sensors
Das, S., & Jayaraman, V. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.06.003 · Cited by 1,226
Electrospun Nanofibers: New Concepts, Materials, and Applications
Xue, J., Xie, J., Liu, W., & Xia, Y. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00218 · Cited by 1,195
Li, Z., Li, H., Wu, Z., Wang, M., Luo, J., Torun, H., Hu, P., Yang, C., Grundmann, M., Liu, X., et al. (2019) · Materials Horizons · doi:10.1039/c8mh01365a · Cited by 760
Graphene–metal oxide nanohybrids for toxic gas sensor: A review
Gupta Chatterjee, S., Chatterjee, S., Ray, A. K., & Chakraborty, A. K. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.07.070 · Cited by 737
Sensing and capture of toxic and hazardous gases and vapors by metal–organic frameworks
Wang, H., Lustig, W. P., & Li, J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00885f · Cited by 695
Gas sensors using carbon nanomaterials: A review
Llobet, E. (2013) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2012.11.014 · Cited by 692
Cited by
Porous materials as effective chemiresistive gas sensors
Sharma, A., Eadi, S. B., Noothalapati, H., Otyepka, M., Lee, H.-D., & Jayaramulu, K. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00761d · Cited by 352
Room-Temperature Semiconductor Gas Sensors: Challenges and Opportunities
Tang, Y., Zhao, Y., & Liu, H. (2022) · ACS Sensors · doi:10.1021/acssensors.2c01142 · Cited by 258
Yaqoob, U., & Younis, M. I. (2021) · Sensors · doi:10.3390/s21082877 · Cited by 256
Metadata
- Authors
- Dong, C., Zhao, R., Yao, L., Ran, Y., Zhang, X., & Wang, Y.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 820
- Pages
- 153194
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2989894500
- Cited by
- 434
- References
- 123
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.