The DOI matches its Crossref record.
The environmental impacts of iron and steel industry: a life cycle assessment study
Open accessAbstract
This study conducts a life cycle assessment for iron and steel production in Turkey using SimaPro software and IMPACT 2002+ impact assessment method with the purpose of comparing the impacts of processes (coke making, sintering, iron making, steel making) and final products (billet, slab, hot rolled wire rod, hot rolled coil), concurrently. System boundary was set as cradle-to-gate and functional unit was selected as 1 ton of final steel product. Among the processes, steel making process exhibited the highest total environmental impact, which was followed by sintering. The highest impacts were in the categories of human health and climate change. Coke production process showed the highest impact on depletion of non-renewable energy sources while it was with a negative contribution in the climate change category because of the avoided external energy consumption due to the production of coke oven gas within the facility. The comparison of the impacts for different final products revealed that hot rolled coil causes the highest total environmental impact followed by hot rolled wire rod, billet and slab. In an attempt to evaluate the effect of having different production scenarios implemented in the facility, three different scenarios representing three different production ratios of semi-finished (billet and slab) and finished (wire rod and coil) products were considered and it was found that the highest impact would come out if all the products were the finished ones and the hot rolling of casting products covers approximately 24% of the total environmental impacts of the full production cycle of one ton of product. Based on the assessment results, suggestions for sustainable production were made.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ren, L., Zhou, S., Peng, T., & Ou, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110846 · Cited by 532
Wang, P., Ryberg, M., Yang, Y., Feng, K., Kara, S., Hauschild, M., & Chen, W.-Q. (2021) · Nature Communications · doi:10.1038/s41467-021-22245-6 · Cited by 302
Multiple pathways linking environmental knowledge and awareness to employees’ green behavior
Safari, A., Salehzadeh, R., Panahi, R., & Abolghasemian, S. (2018) · Corporate Governance: The International Journal of Business in Society · doi:10.1108/cg-08-2016-0168 · Cited by 256
Life Cycle Assessment of Environmental Impact of Steelmaking Process
Liu, H., Li, Q., Li, G., & Ding, R. (2020) · Complexity · doi:10.1155/2020/8863941 · Cited by 19
Metadata
- Authors
- Olmez, G. M., Dilek, F. B., Karanfil, T., & Yetis, U.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2016-09
- Volume
- 130
- Pages
- 195-201
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2179886217
- Cited by
- 186
- References
- 0
- FWCI
- 9.81
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.