The DOI matches its Crossref record.
Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates – Comparative assessment of assorted techniques
Open accessAbstract
Abstract In this study, the intrinsic properties of recycled coarse aggregates (RC), associated with bonded mortar, were modified with two different pretreatment techniques viz-a-viz HCl pretreatment and Na2SO4 pretreatment, while maintaining a fixed aggregate-to-solution ratio of 1:4.5. The residual bonded mortar was quantified to evaluate the potential of both techniques. HCl pretreatment yielded greater removal of bonded mortar content (BMC), almost twice as high as achieved by Na2SO4 pretreatment. Subsequently, the concretes were developed (termed as recycled aggregate concrete; RAC) by incorporating HCl treated coarse aggregates (HTC) and Na2SO4 treated coarse aggregates (STC). Both natural and recycled (untreated) fine aggregates (NF and RF, respectively) were used. Control specimens with natural coarse aggregates (NC) were prepared for comparative assessment. The resulting properties showed significantly influenced by bonded mortar content (BMC). About 14% higher compressive strength was achieved by using HTC in comparison with untreated RC, while a mere corresponding decline of 5% was seen when compared with NC. Likewise, the carbonation resistance and the resistance to chloride ion penetration showed better performance for HTC and STC incorporated concretes. Such superior performance is attributed to the denser interface (between the aggregate and paste matrix) with reduced pores/voids, as assessed from the optical and scanning electron microscopy. Further, the determined properties were used to develop regression models for the prediction of RAC properties. The prediction equations thus obtained showed remarked precision with the experimentally determined results, and as such these can be used for strength and durability prediction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lu, B., Shi, C., Cao, Z., Guo, M., & Zheng, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.350 · Cited by 338
Methods for improving the microstructure of recycled concrete aggregate: A review
Wang, R., Yu, N., & Li, Y. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118164 · Cited by 333
Utilising CO2 technologies for recycled aggregate concrete: A critical review
Tam, V. W. Y., Butera, A., Le, K. N., & Li, W. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118903 · Cited by 270
Kazmi, S. M. S., Munir, M. J., Wu, Y.-F., Patnaikuni, I., Zhou, Y., & Xing, F. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103398 · Cited by 253
Self-citation
Metadata
- Authors
- Kim, Y., Hanif, A., Kazmi, S. M. S., Munir, M. J., & Park, C.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 191
- Pages
- 339-349
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2802095802
- Cited by
- 226
- References
- 0
- FWCI
- 15.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates – Comparative assessment of assorted techniques. https://app.cochat.ai/papers/10.1016/j.jclepro.2018.04.192
- The paper
- Kim, Y., Hanif, A., Kazmi, S. M. S., Munir, M. J., & Park, C. (2018). Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates – Comparative assessment of assorted techniques. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.04.192
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.