The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Treatment of bitumen post oxidative effluents by sulfate radicals based advanced oxidation processes (S-AOPs) under alkaline pH conditions
Abstract
Abstract Sulfate radicals based Advanced Oxidation Processes (S-AOPs), namely Persulfate and peroxymonosulfate, were used for the treatment of post oxidative effluents from a production of petroleum bitumens under alkaline pH. Studies on the identification and monitoring of the volatile organic compounds (VOCs) along with COD, BOD and sulfide ions reduction were performed. Persulfate with a ratio between the oxygen from the oxidant and the COD in the effluents (rox) of 1.28 at 60 °C achieved 33% and 55% reduction of COD and BOD respectively. Peroxymonosulfate with a rox of 1.43 at 60 °C was the most effective S-AOP studied with 43% COD and BOD reduction. Sulfide ions were effectively oxidized in both technologies. Persulfate at lower rox 0.41 at 40 °C was the best process to treat VOCs. A detailed analysis of the effluents composition after treatment revealed VOCs by-product formation. Economical evaluation revealed that persulfate based processes were cheaper. Activation of PS and PMS by heat can occur but effectiveness of this method of activation is low. S-AOPs revealed to be effective as a pre-treatment method in terms of VOCs degradation. These studies also proved that a secondary treatment is mandatory for a cleaner production of petroleum bitumens.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Degradation of antipyrine by UV, UV/H2O2 and UV/PS
Tan, C., Gao, N., Deng, Y., Zhang, Y., Sui, M., Deng, J., & Zhou, S. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.06.060 · Cited by 314
Boczkaj, G., Gągol, M., Klein, M., & Przyjazny, A. (2018) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.08.032 · Cited by 138
Self-citation
Cited by
Wang, J., & Wang, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128392 · Cited by 1,332
Giannakis, S., Lin, K.-Y. A., & Ghanbari, F. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127083 · Cited by 1,340
Samsami, S., Mohamadizaniani, M., Sarrafzadeh, M.-H., Rene, E. R., & Firoozbahr, M. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.05.034 · Cited by 1,006
Fedorov, K., Dinesh, K., Sun, X., Darvishi Cheshmeh Soltani, R., Wang, Z., Sonawane, S., & Boczkaj, G. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134191 · Cited by 497
Self-citationDu, X., Bai, X., Xu, L., Yang, L., & Jin, P. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123245 · Cited by 420
Metadata
- Authors
- Fernandes, A., Makoś, P., & Boczkaj, G.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 195
- Pages
- 374-384
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2804345450
- Cited by
- 193
- References
- 2
- FWCI
- 10.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.