The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Utilization of wheat bran for producing activated carbon with high specific surface area via NaOH activation using industrial furnace
Abstract
Abstract Waste of wheat bran was used for the first time to prepare activated carbon with high specific surface area via sodium hydroxide activation. The effects of activation temperature (700–900 °C) and NaOH mass ratio (1–5) on surface area were studied. Products were characterized by thermal analysis, nitrogen adsorption–desorption, X–ray diffraction, infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. One development model was used to explain the evolution of pore structure. The product synthesized at 800 °C with mass ratio of 4 possessed the largest surface area of 2543 ± 89 m2/g with low ash content of 0.68 ± 0.03 wt%. For liquid adsorption of methylene blue, the maximum adsorption capacity was recorded as 887.3 ± 24.9 mg/g, higher than 663.8 ± 14.8 mg/g for commercial coconut shell carbon. Adsorption data were fitted well with the Redlich–Peterson isotherm and pseudo-second order model, closing to surface area. Cost of carbon production using industrial furnace was calculated as 3.56 ± 0.18 $/kg (reduced 32.4% than tube furnace), with output of 1.28 ± 0.07 kg/d (improved 11.8 times). It could be demonstrated that wheat bran was an effective and sustainable raw material to obtain low cost carbon product with high surface area, indicating its potential utilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Wheat bran-based biorefinery 2: Valorization of products
Apprich, S., Tirpanalan, Ö., Hell, J., Reisinger, M., Böhmdorfer, S., Siebenhandl-Ehn, S., Novalin, S., & Kneifel, W. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2013.12.003 · Cited by 309
Cited by
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Jawad, A. H., Saud Abdulhameed, A., Wilson, L. D., Syed-Hassan, S. S. A., ALOthman, Z. A., & Rizwan Khan, M. (2021) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.09.070 · Cited by 425
Supercapacitor Energy Storage Device Using Biowastes: A Sustainable Approach to Green Energy
Mensah-Darkwa, K., Zequine, C., Kahol, P. K., & Gupta, R. K. (2019) · Sustainability · doi:10.3390/su11020414 · Cited by 321
Chakraborty, R., K, V., Pradhan, M., & Nayak, A. K. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta10269a · Cited by 314
Activated carbon from biomass precursors using phosphoric acid: A review
Neme, I., Gonfa, G., & Masi, C. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e11940 · Cited by 311
Metadata
- Authors
- Zhang, Y., Song, X., Xu, Y., Shen, H., Kong, X., & Xu, H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 210
- Pages
- 366-375
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2899900172
- Cited by
- 187
- References
- 2
- FWCI
- 6.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Utilization of wheat bran for producing activated carbon with high specific surface area via NaOH activation using industrial furnace. https://app.cochat.ai/papers/10.1016/j.jclepro.2018.11.041
- The paper
- Zhang, Y., Song, X., Xu, Y., Shen, H., Kong, X., & Xu, H. (2019). Utilization of wheat bran for producing activated carbon with high specific surface area via NaOH activation using industrial furnace. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.11.041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.