Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 163

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Green synthesis of zeolite 4A using fly ash fused with synergism of NaOH and Na2CO3

Yang, Liyun, Qian, Xiaoming, Yuan, Peng, Bai, Hao, Miki, Takahiro, Men, Fanxu, Li, Hong, Nagasaka, Tetsuya · 2019 · Journal of Cleaner Production

Abstract

A high-purity zeolite 4A was synthesized by the hydrothermal method using fly ash as the raw material. The effects of sodium hydroxide (NaOH) or/and sodium carbonate (Na2CO3) on the activation of fly ash were studied, and the removal efficiency of Cu2+ in aqueous solution was also investigated for the synthesized zeolite. The formation process of the zeolite from fly ash was surveyed by ex situ techniques such as X-ray diffraction (XRD), thermogravimetric analysis and differential scanning calorimetry (TG-DCS), scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM-EDX) and Fourier transform infrared spectroscopy (FTIR). The important influential factors of energy and water consumption were analysed by orthogonal tests, and the best conditions for green synthesis were accurately determined through batch tests. The factors affecting the green synthesis of zeolite are the alkali mixture ratio, alkali melting temperatures, solid-to-liquid ratios, crystallization times and crystallization temperatures. The alkali mixture ratio was indicated to be an important factor for green synthesis according to the results of the orthogonal test. Compared with the use of alkali alone, when NaOH and Na2CO3 were mixed at a mass ratio of 1:2.8, the alkali melting temperature (760 °C) and solid-to-liquid ratios (1:5) were both lower, the crystallization time (4 h) was shorter in the zeolite synthesis process, and the relative crystallinity was the highest at 75.8%. The removal rate of 100 mg/L Cu2+ solution from pH 3 to pH 7 by 0.18 g of zeolite synthesized for 60 min was close to 100%, and the adsorption capacity was 55.5 mg/g. After the zeolite was desorbed and reused 4 times, the removal efficiency of Cu2+ was maintained at 73% at a pH of 3.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2018.11.259

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 163

Metadata

Authors
Yang, L., Qian, X., Yuan, P., Bai, H., Miki, T., Men, F., Li, H., & Nagasaka, T.
Venue
Journal of Cleaner Production
Publisher
Elsevier BV
Published
2019-03
Volume
212
Pages
250-260
ISSN
0959-6526 (ISSN-L)
OpenAlex
W2902766327
Cited by
163
References
2
FWCI
4.68
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.