The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Geopolymer for use in heavy metals adsorption, and advanced oxidative processes: A critical review
Abstract
Abstract Geopolymer is a ceramic material, most often amorphous; finds applications in fire- and heat-resistant coatings and adhesives, medicines, refractory ceramics and binders, and manufacturing of radioactive waste container. Over the last decade, new cement based on geopolymers has been developed. Most relevant to this review is the fact that its porous nature and chemical similarity to zeolites is being employed for applications pertaining to wastewater treatment. Most of the work has been on the adsorptive treatment of water. However, using chemical reasoning and literature available we show that geopolymers have relevance for further activity on additional areas of relevance to waste water treatment such as photocatalysis, disinfection, and H2-energy production from waste water etc. These applications would depend strongly on the properties of geopolymers, which in turn would rely on the precursors employed and the synthetic methods used. The relevance of geopolymers for cleaner production is also highlighted. The use of fly ashes and metakaolin composites for the fabrication and surface tailoring of geopolymers (perhaps using relevant surfactants) is suggested as a plausible step in the right direction. Given the critical analysis of the state of the art, and the plausible directions identified, this article will benefit environmental scientists, engineers and chemists interested in deploying geopolymers for environmental remediation purposes. However moving forward, barriers are to be anticipated for the large scale implementation of geopolymers. Several barriers (e.g. legal, economical, technocrats and synthetic challenges) that are likely to hinder future research and translation are highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Toxicity, mechanism and health effects of some heavy metals
Jaishankar, M., Tseten, T., Anbalagan, N., Mathew, B. B., & Beeregowda, K. N. (2014) · Interdisciplinary Toxicology · doi:10.2478/intox-2014-0009 · Cited by 6,402
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
The geopolymerisation of alumino-silicate minerals
Xu, H., & Van Deventer, J. S. J. (2000) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(99)00074-5 · Cited by 1,876
Burakov, A. E., Galunin, E. V., Burakova, I. V., Kucherova, A. E., Agarwal, S., Tkachev, A. G., & Gupta, V. K. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.11.034 · Cited by 1,612
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Removal of heavy metals from industrial wastewaters: a review
Azimi, A., Azari, A., Rezakazemi, M., & Ansarpour, M. (2017) · ChemBioEng Reviews · doi:10.1002/cben.201600010 · Cited by 1,267
Resistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Rovnaník, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.023 · Cited by 1,020
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Alkali-activated binders: A review
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.015 · Cited by 989
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00025-6 · Cited by 898
Fire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
The making, shaping and treating of steel
McGannon, H. E. (1971) · Andalas University Repository (Andalas University) · Cited by 683
Additive manufacturing of geopolymer for sustainable built environment
Panda, B., Paul, S. C., Hui, L. J., Tay, Y. W. D., & Tan, M. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.165 · Cited by 516
Proctor, D. M., Fehling, K. A., Shay, E. C., Wittenborn, J. L., Green, J. J., Avent, C., Bigham, R. D., Connolly, M., Lee, B., Shepker, T. O., et al. (2000) · Environmental Science & Technology · doi:10.1021/es9906002 · Cited by 493
Regeneration of adsorbents and recovery of heavy metals: a review
Lata, S., Singh, P. K., & Samadder, S. R. (2015) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-014-0714-9 · Cited by 491
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0494216 · Cited by 470
The heavy metal adsorption characteristics on metakaolin-based geopolymer
Cheng, T. W., Lee, M. L., Ko, M. S., Ueng, T. H., & Yang, S. F. (2012) · Applied Clay Science · doi:10.1016/j.clay.2011.11.027 · Cited by 456
A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes
Siyal, A. A., Shamsuddin, M. R., Khan, M. I., Rabat, N. E., Zulfiqar, M., Man, Z., Siame, J., & Azizli, K. A. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.046 · Cited by 443
Geopolymerization process of alkali–metakaolinite characterized by isothermal calorimetry
Yao, X., Zhang, Z., Zhu, H., & Chen, Y. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.04.002 · Cited by 439
Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., Gordillo, M., & Provis, J. L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5490-z · Cited by 414
Batool, F., Akbar, J., Iqbal, S., Noreen, S., & Bukhari, S. N. A. (2018) · Bioinorganic Chemistry and Applications · doi:10.1155/2018/3463724 · Cited by 381
Microbial Ecology of Crown Corrosion in Sewers
Islander, R. L., Devinny, J. S., Mansfeld, F. B., Postyn, A., & Shih, H. (1991) · Journal of Environmental Engineering · doi:10.1061/(asce)0733-9372(1991)117:6(751 · Cited by 367
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.084 · Cited by 363
Fly ash-based geopolymer for Pb removal from aqueous solution
Al-Zboon, K., Al-Harahsheh, M. S., & Hani, F. B. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.01.133 · Cited by 344
The pore structure and permeability of alkali activated fly ash
Ma, Y., Hu, J., & Ye, G. (2013) · Fuel · doi:10.1016/j.fuel.2012.05.034 · Cited by 308
Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters
Novais, R. M., Ascensão, G., Tobaldi, D. M., Seabra, M. P., & Labrincha, J. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.078 · Cited by 270
Javadian, H., Ghorbani, F., Tayebi, H.-A., & Asl, S. H. (2015) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.02.018 · Cited by 268
Coal fly ash-slag-based geopolymers: Microstructure and metal leaching
Izquierdo, M., Querol, X., Davidovits, J., Antenucci, D., Nugteren, H. W., & Fernández‐Pereira, C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.11.063 · Cited by 265
Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters
Novais, R. M., Buruberri, L. H., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.07.059 · Cited by 262
Bonding and abrasion resistance of geopolymeric repair material made with steel slag
Hu, S., Wang, H., Zhang, G., & Ding, Q. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.04.004 · Cited by 258
Duan, P., Yan, C., Zhou, W., & Ren, D. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.143 · Cited by 237
Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: Synthesis and evaluation
Ge, Y., Cui, X., Kong, Y., Li, Z., He, Y., & Zhou, Q. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.038 · Cited by 236
The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars
Xu, H., & van Deventer, J. S. J. (2003) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00499-5 · Cited by 234
A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution
Liu, Y., Yan, C., Zhang, Z., Wang, H., Zhou, S., & Zhou, W. (2016) · Fuel · doi:10.1016/j.fuel.2016.07.116 · Cited by 214
Kara, İ., Yilmazer, D., & Akar, S. T. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.01.008 · Cited by 214
Hoy, M., Horpibulsuk, S., & Arulrajah, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.136 · Cited by 212
Effect of synthesis parameters on compressive strength of fly ash-slag blended geopolymer
Samantasinghar, S., & Singh, S. P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.026 · Cited by 211
Andrejkovičová, S., Sudagar, A., Rocha, J., Patinha, C., Hajjaji, W., da Silva, E. F., Velosa, A., & Rocha, F. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.03.009 · Cited by 209
Fly ash based geopolymer for heavy metal removal: A case study on copper removal
Al-Harahsheh, M. S., Al Zboon, K., Al-Makhadmeh, L., Hararah, M., & Mahasneh, M. (2015) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.06.005 · Cited by 207
Synthesizing one-part geopolymers from rice husk ash
Sturm, P., Gluth, G. J. G., Brouwers, H. J. H., & Kühne, H.-C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.017 · Cited by 200
Structural and chemical properties of thermally treated geopolymer samples
Kljajević, L. M., Nenadović, S., Nenadović, M. T., Bundaleski, N. K., Todorović, B., Pavlović, V. B., & Rakočević, Z. L. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.02.066 · Cited by 189
Ge, Y., Cui, X., Liao, C., & Li, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.079 · Cited by 183
Preparation of geopolymer-based inorganic membrane for removing Ni2+ from wastewater
Ge, Y., Yuan, Y., Wang, K., He, Y., & Cui, X. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.08.006 · Cited by 179
Luukkonen, T., Runtti, H., Niskanen, M., Tolonen, E.-T., Sarkkinen, M., Kemppainen, K., Rämö, J., & Lassi, U. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2015.11.007 · Cited by 166
Mechanism and Chemical Reaction of Fly Ash Geopolymer Cement- A Review
Abdullah, M. M. A. B., Kamarudin, H., Hussain, R. R., Ismail, K. N., Ibrahim, W. M. W., & Besar, P. (2011) · Journal of Asian Scientific Research · Cited by 152
Mix-design and characterization of alkali activated materials based on metakaolin and ladle slag
Bignozzi, M. C., Manzi, S., Lancellotti, I., Kamseu, E., Barbieri, L., & Leonelli, C. (2012) · Applied Clay Science · doi:10.1016/j.clay.2012.09.015 · Cited by 148
Fly ash-based geopolymer as a novel photocatalyst for degradation of dye from wastewater
Zhang, Y., & Liu, L. (2013) · Particuology · doi:10.1016/j.partic.2012.10.007 · Cited by 142
Synthesis of mesoporous geopolymers containing zeolite phases by a hydrothermal treatment
Lee, N. K., Khalid, H. R., & Lee, H. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.016 · Cited by 139
Metakaolin-Based Geopolymers for Targeted Adsorbents to Heavy Metal Ion Separation
López, F. J., Sugita, S., Tagaya, M., & Kobayashi, T. (2014) · Journal of Materials Science and Chemical Engineering · doi:10.4236/msce.2014.27002 · Cited by 135
Falah, M., MacKenzie, K. J. D., Knibbe, R., et al. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.016 · Cited by 129
El‐Geundi, M. S. (1991) · Adsorption Science & Technology · doi:10.1177/026361749100800404 · Cited by 128
Kaolin-based geopolymers with various NaOH concentrations
Cheng-Yong, H., Kamarudin, H., Abdullah, M. M. A. B., Bnhussain, M., Musa, L., Nizar, I. K., Ruzaidi, C. M., & Yun-Ming, L. (2013) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-013-0729-0 · Cited by 126
Microbial corrosion of concrete
Diercks, M., Sand, W., & Bock, E. (1991) · Cellular and Molecular Life Sciences · doi:10.1007/bf01949869 · Cited by 125
Effect of blast furnace slag grades on fly ash based geopolymer waste forms
Xu, H., Gong, W., Syltebo, L., Izzo, K., Lutze, W., & Pegg, I. L. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.018 · Cited by 121
Synthesis of geopolymer composites from a mixture of volcanic scoria and metakaolin
Djobo, J. N. Y., Tchadjié, L. N., Tchakouté, H. K., Diffo, B. B. K., Elimbi, A., & Njopwouo, D. (2014) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2014.08.003 · Cited by 117
Lee, N. K., Khalid, H. R., & Lee, H. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.01.030 · Cited by 115
Zhang, Y., He, P. Y., Zhang, Y. X., & Chen, H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.171 · Cited by 109
Noor‐ul‐Amin, Faisal, M., Muhammad, K., & Gul, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.024 · Cited by 106
Zhang, Y. J., Liu, L. C., Xu, Y., Wang, Y., & Xu, D. L. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.01.001 · Cited by 100
Zhang, Y., Liu, L. C., Ni, L. L., & Wang, B. L. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.02.025 · Cited by 95
Naghsh, M., & Shams, K. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.06.008 · Cited by 95
Singhal, A., Gangwar, B. P., & Gayathry, J. M. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.09.013 · Cited by 95
Review on Alkali-Activated Fly Ash Based Geopolymer Concrete
Zerfu, K., & Ekaputri, J. J. (2016) · Materials science forum · doi:10.4028/www.scientific.net/msf.841.162 · Cited by 78
Fly ash-based geopolymeric adsorbent for copper ion removal from wastewater
Mužek, M. N., Svilović, S., & Zelić, J. (2013) · Desalination and Water Treatment · doi:10.1080/19443994.2013.792015 · Cited by 70
Al‐Zboon, K. K., Al-Smadi, B. M., & Al-Khawaldh, S. (2016) · Water Air & Soil Pollution · doi:10.1007/s11270-016-2937-5 · Cited by 68
Development of Equivalent Stress Block Parameters for Fly-Ash-Based Geopolymer Concrete
Prachasaree, W., Limkatanyu, S., Hawa, A., & Samakrattakit, A. (2014) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-014-1447-2 · Cited by 66
Microbial mediated deterioration of reinforced concrete structures
Wei, S., Sánchez‐Silva, M., Trejo, D., & Gillis, C. (2010) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2010.09.001 · Cited by 66
Yip, C. K., Lukey, G. C., & Dean, J. S. J. V. D. (2006) · Ceramic transactions /Ceramic transactions · doi:10.1002/9781118406892.ch13 · Cited by 65
Geopolymer Binders: A Need for Future Concrete Construction
Srinivasan, K., & Sivakumar, A. (2013) · ISRN Polymer Science · doi:10.1155/2013/509185 · Cited by 65
Review of methods for the preparation of magnetic metal oxides
Stojanović, B. D., Dzunuzovic, A. S., & Ilic, N. I. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811180-2.00017-7 · Cited by 60
Natural pozzolan-and granulated blast furnace slag-based binary geopolymers
Salazar, R. A. R., de Gutiérrez, R. M., & Gordillo, M. (2016) · Materiales de Construcción · doi:10.3989/mc.2016.03615 · Cited by 55
Two-phase geopolymerization of kaolinite-based geopolymers
Alshaaer, M. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.10.004 · Cited by 54
Optimization of the metakaolin geopolymer preparation for maximized ammonium adsorption capacity
Luukkοnen, T., Tolonen, E.-T., Runtti, H., Kemppainen, K., Perämäki, P., Rämö, J., & Lassi, U. M. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1156-9 · Cited by 54
Falah, M., MacKenzie, K. J. D., Hanna, J. V., & Page, S. J. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9295-3 · Cited by 50
Microstructural characteristics and adsorption potential of a zeolitic tuff–metakaolin geopolymer
Alshaaer, M., Zaharaki, D., & Komnitsas, K. (2014) · Desalination and Water Treatment · doi:10.1080/19443994.2014.938306 · Cited by 45
Geopolymer-supported photocatalytic TiO2 film: Preparation and characterization
Chen, L., Zheng, K., & Liu, Y. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.097 · Cited by 44
Zahid, M., Shafiq, N., & Jalal, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.046 · Cited by 43
Cesium-adsorbent Geopolymer Foams Based on Silica from Rice Husk and Metakaolin
López, F. J., Sugita, S., & Kobayashi, T. (2013) · Chemistry Letters · doi:10.1246/cl.130851 · Cited by 42
Analysis on Characteristics of Fly Ash from Coal Fired Power Stations
Yu, J., Li, X., Fleming, D., Meng, Z., Wang, D., & Tahmasebi, A. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.02.054 · Cited by 39
Fabrication of Geopolymers from Untreated Kaolin Clay for Construction Purposes
Faqir, N. M., SHAWABKEH, R. A., Al-Harthi, M. A., & Wahhab, H. A.-A. (2018) · Geotechnical and Geological Engineering · doi:10.1007/s10706-018-0597-5 · Cited by 36
Al‐Zboon, K. K., Al-Smadi, B. M., & Al-Khawaldh, S. (2017) · Water Air & Soil Pollution · doi:10.1007/s11270-017-3335-3 · Cited by 32
Timakul, P., Rattanaprasit, W., & Aungkavattana, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.037 · Cited by 31
Synthesis of ternary geopolymers based on metakaolin, boiler slag and rice husk ash
Villaquirán‐Caicedo, M. A., & de Gutiérrez, R. M. (2015) · DYNA · doi:10.15446/dyna.v82n194.46352 · Cited by 24
Nanourchin ZnO@TiCN composites for Cr (VI) adsorption and thermochemical remediation
Rasaki, S. A., Zhang, B., Liu, S., Thomas, T., & Yang, M. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.05.040 · Cited by 19
Self-citationReview of Geopolymer Materials for Thermal Insulating Applications
Azimi, E. A., Abdullah, M. M. A. B., Liew, Y. M., Heah, C. Y., Kamarudin, H., & Aziz, I. H. (2015) · Key engineering materials · doi:10.4028/www.scientific.net/kem.660.17 · Cited by 16
Alkali-activated cements for photocatalytic degradation of organic dyes
Zhang, Y. J., Kang, L., & Liu, L. (2015) · Elsevier eBooks · doi:10.1533/9781782422884.5.729 · Cited by 14
A Review on Immobilisation of Toxic Wastes Using Geopolymer Technique
Vu, T. H., & Tran, M. V. (2017) · Lecture notes in civil engineering · doi:10.1007/978-981-10-6713-6_29 · Cited by 8
Falah, M. (2015) · Open Access Victoria University of Wellington | Te Herenga Waka (Figshare) · doi:10.26686/wgtn.17013215 · Cited by 3
Cited by
Liu, J., Hu, L., Tang, L., & Ren, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123451 · Cited by 311
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Fan, C., Wang, B., Ai, H., Qi, Y., & Liu, Z. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128790 · Cited by 294
Metadata
- Authors
- Rasaki, S. A., Bingxue, Z., Guarecuco, R., Thomas, T., & Minghui, Y.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 213
- Pages
- 42-58
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2905004719
- Cited by
- 304
- References
- 92
- FWCI
- 21.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.