CoChat

A temporal-spatial interpolation and extrapolation method based on geographic Long Short-Term Memory neural network for PM2.5

Ma, Jun, Ding, Yuexiong, Cheng, Jack C.P., Jiang, Feifeng, Wan, Zhiwei · 2019 · Journal of Cleaner Production
Cited by 210

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

Abstract Nowadays, real-time air pollution monitoring has been an important approach for supporting pollution control and reduction. However, due to the high construction cost and limited detection range of monitoring stations, not all the air pollutant concentrations in every corner can be monitored, and a whole picture of the spatial distribution of air pollution is usually lacked for comprehensive spatial analysis and air quality control. To address this problem, satellite remote sensing and spatial interpolation/extrapolation technologies have been commonly used in past research. However, the spatial distribution calculated by remote sensing techniques could be less accurate due to the limited amount of recorded data for testing and adjustments. Performance of traditional spatial interpolation/extrapolation techniques, such as Kriging and IDW, was limited by several subjective assumptions and pre-set formulations that are less suitable for non-linear real-world situations. As an alternative, machine learning and neural network-based methods have been proposed recently. However, most of these methods failed to well consider the long short temporal trend and spatial associations of air pollution simultaneously. To overcome these limitations, this paper proposed a newly designed spatial interpolation/extrapolation methodology namely Geo-LSTM to generate the spatial distribution of air pollutant concentrations. The model was developed based on the Long Short-Term Memory (LSTM) neural network to capture the long-term dependencies of air quality. A geo-layer was designed to integrate the spatial-temporal correlation from other monitoring stations. To evaluate the effectiveness of the proposed methodology, a case study in Washington state was conducted. The experimental results show that Geo-LSTM has a RMSE of 0.0437, and is almost 60.13% better than traditional methods like IDW.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2019.117729

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 210

Metadata

Authors
Ma, J., Ding, Y., Cheng, J. C. P., Jiang, F., & Wan, Z.
Venue
Journal of Cleaner Production
Publisher
Elsevier BV
Published
2019-11
Volume
237
Pages
117729
ISSN
0959-6526 (ISSN-L)
OpenAlex
W2963370351
Cited by
210
References
3
FWCI
11.19
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.