Effects of active waste powder obtained from C&D waste on the microproperties and water permeability of concrete
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Using waste powder (WP) derived from construction and demolition (C&D) waste as supplementary cementitious materials in the preparation of waste powder concrete (WPC) provides a new way of reclaiming C&D waste. This paper focuses on investigating the microproperties and the water permeability of the WPC. A series of micro experiments and water permeability related tests were conducted. The results show that the elements and compound compositions of WP are similar with those of cement and fly ash. The addition of high fineness WP promotes the hydration rate and improves the pore structure of WPC due to its microaggregate filling effect. The incorporation of WP decreased the workability and drying shrinkage behavior of WPC, and the WPC with up to 30%WP has a satisfied compressive strength. The water permeability of the WPC, under capillary absorption and pressure, is lower than that of the control group, and the WPC with approximately 30%WP has the lowest water permeability. Subjected to the harsh environment of freeze-thaw cycles and applied loading, the addition of WP increases the sensitivity of the WPC to the imposed damage and water permeability. Although the imposed damage increases the water permeability of the WPC, incorporating appropriate content of WP leads to a lower water permeability of WPC than that of the control group when the exposure condition is the same.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
Cited by
Tang, Q., Ma, Z., Wu, H., & Wang, W. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103807 · Cited by 549
Self-citationHanifa, M., Agarwal, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102292 · Cited by 372
A review on durability of basalt fiber reinforced concrete
Li, Y., Zhang, J., He, Y., Huang, G., Li, J., Niu, Z., & Gao, B. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109519 · Cited by 213
New perspectives on utilization of CO 2 sequestration technologies in cement-based materials
Liu, B., Qin, J., Shi, J., Jiang, J., Wu, X., & He, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121660 · Cited by 201
Pu, Y., Li, L., Wang, Q., Shi, X., Fu, L., Zhang, G., Luan, C., & Abomohra, A. E.-F. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101362 · Cited by 142
Metadata
- Authors
- Ma, Z., Liu, M., Duan, Z., Liang, C., & Wu, H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 257
- Pages
- 120518
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3005704967
- Cited by
- 130
- References
- 1
- FWCI
- 10.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.