The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Acceleration of discharge process of clean energy storage unit with insertion of porous foam considering nanoparticle enhanced paraffin
Abstract
Abstract In current investigation, a clean energy storage unit has been designed aiming to decrease the energy consumption through the building. To increase the space between the passing air and the Phase change material (PCM), instead of a smooth channel, a sinusoidal channel has been considered for the airway passage. Furthermore, porous media and nanoparticles have been applied in this unit for the purpose of enhancing heat transfer. Considering previous research works, the simultaneous use of these three methods for augmenting the performance has not been scrutinized so far. In this study, three mechanisms for augmenting heat transfer and the interaction of these methods to augment the performance of the system have been evaluated. Based on comparison with experimental data, outputs are very excellent fit with maximum 9.3% deviation. For evaluate efficiency of unit, solidification duration was analyzed and outputs proved that for case with porous foam solidification finishes 21.4% faster than the base case. Slope of profile for second case is higher than first one and the process completed at t = 33 h. For case with porous foam, augmenting time up to 13 h leads to augmenting trend for heat release value and then opposite trend appears. Heat flux transfer to air reduces with rise of time which provides lower temperature of outlet air. Slope of profile for air outlet temperature augments at t = 33 h when all liquid convert to solid for second case. As porous foam utilizes, temperature of PCM reduces and no sensible difference appears in various positions in each section.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nield, D. A., & Bejan, A. (1999) · Springer eBooks · doi:10.1007/978-1-4757-3033-3 · Cited by 5,282
(2006) · Springer eBooks · doi:10.1007/0-387-33431-9 · Cited by 1,683
Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory
Mahian, O., Kolsi, L., Amani, M., Estellé, P., Ahmadi, G., Kleinstreuer, C., Marshall, J. S., Siavashi, M., Taylor, R. A., Niazmand, H., et al. (2019) · Physics Reports · doi:10.1016/j.physrep.2018.11.004 · Cited by 949
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olives, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 618
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.01.011 · Cited by 562
Qiu, L., Zhu, N., Feng, Y., Michaelides, E. E., Żyła, G., Jing, D., Zhang, X., Norris, P. M., Markides, C. N., & Mahian, O. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.001 · Cited by 523
Recent advances in modeling and simulation of nanofluid flows—Part II: Applications
Mahian, O., Kolsi, L., Amani, M., Estellé, P., Ahmadi, G., Kleinstreuer, C., Marshall, J. S., Taylor, R. A., Abu-Nada, E., Rashidi, S., et al. (2019) · Physics Reports · doi:10.1016/j.physrep.2018.11.003 · Cited by 501
Tan, F. L., Hosseinizadeh, S. F., Khodadadi, J. M., & Fan, L. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.02.043 · Cited by 457
Cited by
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Melting process of nanoparticle enhanced PCM through storage cylinder incorporating fins
Li, F., Almarashi, A., Jafaryar, M., Hajizadeh, M. R., & Chu, Y.-M. (2021) · Powder Technology · doi:10.1016/j.powtec.2020.12.026 · Cited by 184
Self-citationSolidification of PCM within a tank with longitudinal-Y shape fins and CuO nanoparticle
Hajizadeh, M. R., Keshteli, A. N., & Bach, Q.-V. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114188 · Cited by 76
Metadata
- Authors
- Sheikholeslami, M., Jafaryar, M., Shafee, A., & Babazadeh, H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 261
- Pages
- 121206
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3012900875
- Cited by
- 277
- References
- 29
- FWCI
- 31.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Acceleration of discharge process of clean energy storage unit with insertion of porous foam considering nanoparticle enhanced paraffin. https://app.cochat.ai/papers/10.1016/j.jclepro.2020.121206
- The paper
- Sheikholeslami, M., Jafaryar, M., Shafee, A., & Babazadeh, H. (2020). Acceleration of discharge process of clean energy storage unit with insertion of porous foam considering nanoparticle enhanced paraffin. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.121206
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.