The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Feasibility of using ultrahigh-volume limestone-calcined clay blend to develop sustainable medium-strength Engineered Cementitious Composites (ECC)
Abstract
Abstract Engineered Cementitious Composites (ECC) showing multiple-cracking and strain-hardening under tension are appealing for the construction industry, but the high cement content in conventional ECC leads to high environmental impacts. Recently, the limestone and calcined clay (LCC) blend has been proposed as a promising alternative of Supplementary Cementing Materials (SCM) to address the inadequacy of common SCM such as fly ash and blast furnace slag, which have been widely-used in ECC. This paper reports a feasibility study for the first time on using ultrahigh-volume LCC blend (HVLCC, 70% and 80% by weight of binder) to produce sustainable medium-strength ECC. Three water/binder ratios (0.30, 0.35 and 0.40) and two sand/binder ratios (0.2 and 0.4) were explored. HVLCC-ECC can achieve a tensile strain capacity of 0.57–1.58%, tensile strength of 3.24–5.19 MPa and compressive strength of 33–65 MPa at 28 days. HVLCC-ECC also have sufficient early strength at 3 days (22-38 MPa), and similar fresh properties and bulk densities under surface-dry condition (1900-2100 kg/m3), as compared to conventional ECC. Additionally, HVLCC-ECC show about 1/6 higher embodied energy and about 1/6 lower embodied carbon than a typical ECC mix with 55% fly ash in the binder, and ECC with fly ash perform much better than ECC with LCC blend in terms of embodied energy and embodied carbon per unit strength or strain capacity. Nevertheless, this new version of HVLCC-ECC with adequate mechanical performance are still attractive from the perspective of shortage of fly ash in the future due to the reduced consumption of coal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Assessing, Understanding and Unlocking Supplementary Cementitious Materials
Snellings, R. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.12 · Cited by 348
Cited by
Huang, B.-T., Wu, J.-Q., Yu, J., Dai, J.-G., Leung, C. K. Y., & Li, V. C. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106292 · Cited by 364
Self-citationThe greening of engineered cementitious composites (ECC): A review
Shoji, D., He, Z., Zhang, D., & Li, V. C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126701 · Cited by 261
Lao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
“Unlike ECC materials showing multiple stress drops in tensile responses (Yu et al., 2020; Xu et al., 2022a; Li et al., 2023; Xu et al., 2023), the tensile stress-strain curves of SHUHPGC were very smooth, indicating the excellent crack width control ability of steel fibers (Lao et al.”
Background
Metadata
- Authors
- Yu, J., Wu, H.-L., & Leung, C. K. Y.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 262
- Pages
- 121343
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3014395014
- Cited by
- 212
- References
- 1
- FWCI
- 12.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.