The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A comparative study on geopolymers synthesized by different classes of fly ash after exposure to elevated temperatures
Abstract
Abstract Due to more restrictions in disposal regulations, limited accessibility of landfills, and growing disposal costs, more sustainable methods are needed to recycle coal fly ash. Coal fly ash-based geopolymer is regarded as an environmental-friendly alternative cementitious material to ordinary Portland cement for its sustainable characteristics such as less CO2 emissions, less energy consumption, and less leaching of toxic elements. Mechanical properties and fire-resistance of geopolymer concrete have been investigated in previous studies. However, there lacks a systematic study on the thermal-mechanical behaviors of geopolymer derived from different classes of fly ash after exposure to high temperature (>800 °C). This study presents a detailed comparative study concerning the effect of elevated temperatures (up to 1200 °C) on Class C and Class F fly ash-based geopolymer pastes. The thermo-physical behavior, engineering performance, and microstructures of the geopolymers before and after the exposure have been investigated. In addition, sustainability analysis of the raw materials and geopolymer was also presented in this study. The findings demonstrate that Class F fly ash-based geopolymer pastes have better mechanical properties and thermo-physical performance when the heating temperature is below 500 °C. On the other hand, Class C fly ash-based geopolymer specimens have better thermal performance and higher retention ratio of strengths after being exposed to higher temperatures (>800 °C). The results can provide more detailed guidance for engineers to sustainably use the fly-ash based geopolymer in different specific temperature ranges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Cited by
Durability Performance of Geopolymer Concrete: A Review
Wong, L. S. (2022) · Polymers · doi:10.3390/polym14050868 · Cited by 380
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Metadata
- Authors
- Jiang, X., Zhang, Y., Xiao, R., Polaczyk, P., Zhang, M., Hu, W., Bai, Y., & Huang, B.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 270
- Pages
- 122500
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3035511227
- Cited by
- 215
- References
- 3
- FWCI
- 17.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.