Energy output of piezoelectric transducers and pavements under simulated traffic load
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Piezoelectric technology introduced to pavement structures can transform the potential renewable mechanical energy in the road into electrical energy, and this provides new ideas for solving the energy supply problem of green and intelligent transportation. The purpose of this study is to quantify the energy output of piezoelectric transducers under vehicle load and thereafter estimate the daily energy output of piezoelectric pavements. The loading process and the energy output model of piezoelectric transducers are analyzed and established, respectively. Through numerical analysis, the energy output variation laws of these transducers are evaluated in three aspects: load, speed, and resistance. The energy output is estimated based on the daily traffic volume statistics. The layout of piezoelectric transducers on the piezoelectric pavement is designed, and the economic benefit of piezoelectric pavements is preliminarily analyzed. Results show that the larger loads and the faster speeds of vehicles, the larger the energy power. One piezoelectric transducer can output 0.058-J energy in a single 0.7-MPa loading. However, higher output power does not guarantee a higher energy output. The maximum energy output occurs at the optimal vehicle speed which is influenced by resistance, but the maximum energy output remains the same at different optimal speeds. By increasing the resistance, the energy output of piezoelectric transducers can reach the maximum at a low speed. Under the daily traffic volume, the energy output of a single piezoelectric transducer can reach 963.99 J, and the daily energy output of a 100-m piezoelectric pavement is approximately equal to the total battery power of 35 mobile phones. Clean energy harvesting in the pavement has broad prospects by using piezoelectric technology, but the energy output of road piezoelectric transducers still needs to be further improved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting
Moure, A., Izquierdo Rodríguez, M. A., Rueda, S. H., Gonzalo, A., Rubio-Marcos, F., Cuadros, D. U., Pérez-Lepe, A., & Fernández, J. F. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.030 · Cited by 157
Cited by
Pang, Y., He, T., Liu, S., Zhu, X., & Lee, C. (2024) · Advanced Science · doi:10.1002/advs.202306574 · Cited by 60
Mou, K., Ji, X., Li, X., Zhou, H., Wu, Y., & Fang, Y. (2025) · Materials · doi:10.3390/ma18040786 · Cited by 18
“After 500,000 cycles of loading, the voltage decreased by only 2%, indicating that the PEH has good long-term stability [8,9].”
Pham, T. H., Bui, T. D., & Dao, T. T. (2023) · Micromachines · doi:10.3390/mi14051058 · Cited by 12
Metadata
- Authors
- Cao, Y., Sha, A., Liu, Z., Li, J., & Jiang, W.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 279
- Pages
- 123508
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3047650208
- Cited by
- 63
- References
- 1
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.