Cited by 310Asphalt Pavement Performance EvaluationMaterials Engineering and ProcessingInnovative concrete reinforcement materials

The DOI matches its Crossref record; 183 of the 184 references it cites were found in a registry or an index.

Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review

Wu, Shenghua, Montalvo, Luke·2021·Journal of Cleaner Production

DOI 10.1016/j.jclepro.2020.124355

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2020.124355

Cites

183 of 183 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

1 retracted

RETRACTED: Influence of thermoplastic polyurethane and synthesized polyurethane additive in performance of asphalt pavements
Bazmara, B., Tahersima, M., & Behravan, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.093 · Cited by 125
Retracted
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Municipal solid waste (MSW) landfill: A source of microplastics? -Evidence of microplastics in landfill leachate
He, P., Chen, L., Shao, L., Zhang, H., & Lü, F. (2019) · Water Research · doi:10.1016/j.watres.2019.04.060 · Cited by 947
A review of the use of recycled solid waste materials in asphalt pavements
Huang, Y. F., Bird, R. N., & Heidrich, O. (2007) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2007.02.002 · Cited by 723
An assessment of the toxicity of polypropylene microplastics in human derived cells
Hwang, J., Choi, D., Han, S., Choi, J. H., & Hong, J. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.05.071 · Cited by 687
Twenty years of PET bottle to bottle recycling—an overview
Welle, F. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.009 · Cited by 643
A review on the viable technology for construction waste recycling
Tam, V. W. Y., & Tam, C. M. (2006) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2005.12.002 · Cited by 505
Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen
Wu, S., Pang, L., Mo, L., Chen, Y., & Zhu, G. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.05.004 · Cited by 476
Self-citation
An overview of the problems posed by plastic products and the role of extended producer responsibility in Europe
Filho, W. L., Saari, U. A., Fedoruk, M., Iital, A., Moora, H., Klõga, M., & Voronova, V. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.256 · Cited by 448
Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective
Lazarevic, D., Aoustin, E., Buclet, N., & Brandt, N. (2010) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2010.09.014 · Cited by 429
Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix
Hınıslıoğlu, S. (2003) · Materials Letters · doi:10.1016/s0167-577x(03)00458-0 · Cited by 425
Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen
Şengöz, B., & Isikyakar, G. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.07.013 · Cited by 389
Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: A review
Li, J., Xiao, F., Zhang, L., & Amirkhanian, S. N. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.061 · Cited by 340
A review of using waste and virgin polymer in pavement
Kalantar, Z., Karim, M. R., & Abdelaziz, M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.01.009 · Cited by 336
Laboratory design and investigation of the properties of continuously graded Asphaltic concrete containing recycled plastics aggregate replacement (Plastiphalt)
Zoorob, S. E., & Suparma, L. B. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00026-3 · Cited by 324
Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt
Ahmadinia, E., Zargar, M., Karim, M. R., Abdelaziz, M., & Ahmadinia, E. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.06.015 · Cited by 300
LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore
Hsien Hui, K. H. O. O. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.010 · Cited by 294
Harvesting the unexplored potential of European waste materials for road construction
Poulikakos, L. D., Papadaskalopoulou, C., Hofko, B., Gschösser, F., Falchetto, A. C., Bueno, M., Arraigada, M., Sousa, J. P., Ruiz, R., Petit, C., et al. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.09.008 · Cited by 289
The effect of polypropylene fibers on asphalt performance
Tapkın, S. (2007) · Building and Environment · doi:10.1016/j.buildenv.2007.02.011 · Cited by 279
The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review
Lin, C., Yang, F., Guo, G., Ren, M., Shi, J., & Le, T. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.213 · Cited by 269
Reclaimed Polymers as Asphalt Binder Modifiers for More Sustainable Roads: A Review
Brasileiro, L. L., Moreno-Navarro, F., Tauste, R., de Matos, J. M. E., & Rubio-Gámez, M. C. (2019) · Sustainability · doi:10.3390/su11030646 · Cited by 262
A technique to dispose waste plastics in an ecofriendly way – Application in construction of flexible pavements
Vasudevan, R., Sekar, A. R. C., Sundarakannan, B., & Velkennedy, R. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.08.031 · Cited by 257
Effect of polyethylene on life of flexible pavements
Al-Hadidy, A.-R. I., & Yi-qiu, T. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.07.004 · Cited by 255
Life cycle assessment of road construction alternative materials: A literature review
Balaguera, A., Peláez, G. I. C., Albertí, J., & Fullana–i–Palmer, P. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.01.003 · Cited by 254
Development of a recycled polymer modified binder for use in stone mastic asphalt
Casey, D., McNally, C., Gibney, A., & Gilchrist, M. D. (2008) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2008.06.002 · Cited by 242
CHEMICAL COMPOSITION OF ASPHALT AS RELATED TO ASPHALT DURABILITY: STATE OF THE ART
Petersen, J. C. (1984) · Transportation Research Record Journal of the Transportation Research Board · Cited by 236
Value-added application of waste PET based additives in bituminous mixtures containing high percentage of reclaimed asphalt pavement (RAP)
Leng, Z., Sreeram, A., Padhan, R. K., & Tan, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.119 · Cited by 228
Performance of recycled plastic waste modified asphalt binder in Saudi Arabia
Dalhat, M. A., & Wahhab, H. I. A. (2015) · International Journal of Pavement Engineering · doi:10.1080/10298436.2015.1088150 · Cited by 227
Effect of waste polymer addition on the rheology of modified bitumen
García‐Morales, M., Partal, P., Navarro, F. J., & Gallegos, C. (2005) · Fuel · doi:10.1016/j.fuel.2005.09.015 · Cited by 226
Auto-sorting commonly recovered plastics from waste household appliances and electronics using near-infrared spectroscopy
Wu, X., Li, J., Yao, L., & Xu, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118732 · Cited by 223
Degradation of excavated polyethylene and polypropylene waste from landfill
Canopoli, L., Coulon, F., & Wagland, S. T. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.134125 · Cited by 222
Life cycle assessment of end-of-life treatments of waste plastics in China
Chen, Y., Cui, Z., Cui, X., Liu, W., Wang, X., Li, X., & Li, S. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.03.011 · Cited by 215
Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement
Hassani, A., Ganjidoust, H., & Maghanaki, A. A. (2005) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x05056739 · Cited by 208
Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test
Moghaddam, T. B., Soltani, M., & Karim, M. R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.07.015 · Cited by 203
Recent developments in recycling of polystyrene based plastics
Thakur, S., Verma, A., Sharma, B., Chaudhary, J., Tamulevičius, S., & Thakur, V. K. (2018) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.03.011 · Cited by 203
Recycling of wastes for value-added applications in concrete blocks: An overview
Meng, Y., Ling, T., & Mo, K. H. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.07.029 · Cited by 194
Potential uses and value-added products derived from waste polystyrene in developing countries: A review
Chaukura, N., Gwenzi, W., Bunhu, T., Ruziwa, D. T., & Pumure, I. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.10.031 · Cited by 184
Performance of polyurethane modified asphalt and its mixtures
Sun, M., Zheng, M., Qu, G., Kun, Y., Bi, Y., & Wang, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.10.025 · Cited by 182
Evaluation of durability and functional performance of porous polyurethane mixture in porous pavement
Chen, J., Yin, X., Wang, H., & Ding, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.297 · Cited by 181
Environmental life cycle cost assessment: Recycling of hard plastic waste collected at Danish recycling centres
Faraca, G., Martinez-Sanchez, V., & Astrup, T. F. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.01.014 · Cited by 178
Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
Reich, M. J., Woern, A. L., Tanikella, N. G., & Pearce, J. M. (2019) · Materials · doi:10.3390/ma12101642 · Cited by 164
Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete
Sojobi, A. O., Nwobodo, S. E., & Aladegboye, O. (2016) · Cogent Engineering · doi:10.1080/23311916.2015.1133480 · Cited by 150
Comparative analysis of the performance of asphalt concretes modified by dry way with polymeric waste
Lastra-González, P., Calzada-Pérez, M. Á., Castro‐Fresno, D., Vega-Zamanillo, Á., & Indacoechea-Vega, I. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.156 · Cited by 150
Use of plastic scrap in asphalt mixtures added by dry method as a partial substitute for bitumen
Movilla-Quesada, D., Raposeiras, A. C., Silva-Klein, L. T., Lastra-González, P., & Castro‐Fresno, D. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.018 · Cited by 150
Sustainability Assessment of Green Asphalt Mixtures: A Review
Pouranian, M. R., & Shishehbor, M. (2019) · Environments · doi:10.3390/environments6060073 · Cited by 149
Preparation, properties and modification mechanism of polyurethane modified emulsified asphalt
Sheng, X., Wang, M., Xu, T., & Chen, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.177 · Cited by 145
Experimental study on anti-icing and deicing performance of polyurethane concrete as road surface layer
Chen, J., Ma, X., Wang, H., Xie, P., & Huang, W. R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.170 · Cited by 144
Recycled plastic granules and demolition wastes as construction materials: Resilient moduli and strength characteristics
Arulrajah, A., Yaghoubi, E., Wong, Y. C., & Horpibulsuk, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.178 · Cited by 143
Rheological properties and micro-characteristics of polyurethane composite modified asphalt
Jin, X., Guo, N., You, Z., Wang, L., Wen, Y., & Tan, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117395 · Cited by 140
A call for Canada to move toward zero plastic waste by reducing and recycling single-use plastics
Walker, T. R., & Xanthos, D. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.02.014 · Cited by 139
Renewable materials in bituminous binders and mixtures: Speculative pretext or reliable opportunity?
Ingrassia, L. P., Lu, X., Ferrotti, G., & Canestrari, F. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.01.034 · Cited by 137
Using waste polymers as a reliable alternative for asphalt binder modification – Performance and morphological assessment
Costa, L. M. B., da Silva, H. M. R. D., Peralta, J., & Oliveira, J. R. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.279 · Cited by 134
Development of a sustainable pervious pavement material using recycled ceramic aggregate and bio-based polyurethane binder
Lu, G., Liu, P., Wang, Y., Faßbender, S., Wang, D., & Oeser, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.184 · Cited by 134
Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene
Yan, K., Xu, H., & You, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.092 · Cited by 127
An approach to the usage of polyethylene terephthalate (PET) waste as roadway pavement material
Gürü, M., Çubuk, M. K., Arslan, D., Farzanian, S. A., & Bi̇li̇ci̇, İ. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.07.018 · Cited by 125
Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements
Lu, G., Renken, L., Li, T., Wang, D., Li, H., & Oeser, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.051 · Cited by 122
Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites
Markanday, S. S., Filippi, S., Polacco, G., Kazatchkov, I. B., Stastna, J., & Zanzotto, L. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.12.024 · Cited by 118
Analysis of the influence of using recycled polystyrene as a substitute for bitumen in the behaviour of asphalt concrete mixtures.
Vila-Cortavitarte, M., Lastra-González, P., Calzada-Pérez, M. Á., & Indacoechea-Vega, I. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.232 · Cited by 118
Performance evaluation of bitumen modified by various types of waste plastics
Köfteci, S., Ahmedzade, P., & Kultayev, B. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.067 · Cited by 115
Green Pavement using Recycled Polyethylene Terephthalate (PET) as Partial Fine Aggregate Replacement in Modified Asphalt
Rahman, W. M. N. W. A., & Wahab, A. F. A. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.02.018 · Cited by 114
Effect of polymer modification on the ageing properties of asphalt binders: Chemical and morphological investigation
Singh, B., & Kumar, P. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.050 · Cited by 112
Transforming waste expanded polystyrene foam into hyper-crosslinked polymers for carbon dioxide capture and separation
Fu, Z., Jia, J., Li, J., & Liu, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.090 · Cited by 111
The use of waste materials in wood-plastic composites and their impact on the profitability of the product
Keskisaari, A., & Kärki, T. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.03.023 · Cited by 110
Ethylene vinyl acetate copolymer modified epoxy asphalt binders: Phase separation evolution and mechanical properties
Liu, Y., Zhang, J., Chen, R., Cai, J., Xi, Z., & Xie, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.081 · Cited by 108
Plastic waste management in construction: technological and institutional issues
Rebeiz, K. S., & Craft, A. P. (1995) · Resources Conservation and Recycling · doi:10.1016/0921-3449(95)00034-8 · Cited by 105
Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt
Xia, L., Cao, D., Zhang, H., & Guo, Y. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.207 · Cited by 105
Laboratory evaluation on performance of porous polyurethane mixtures and OGFC
Lin, C., Wang, T., Le, T., Yuan, J., & Shi, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.145 · Cited by 105
Incorporation of Waste Plastic in Asphalt Binders to Improve Their Performance in the Pavement
Costa, L. M. B., da Silva, H. M. R. D., Oliveira, J. R. M., & Fernandes, S. R. M. (2013) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.6135/ijprt.org.tw/2013.6(4).457 · Cited by 104
A sustainable approach: Utilization of waste PVC in asphalting of roads
Behl, A., Sharma, G., & Kumar, G. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.12.050 · Cited by 102
The research for crumb rubber/waste plastic compound modified asphalt
Zhang, F., & Hu, C. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5198-4 · Cited by 101
Characterising the deterioration of different plastics in air and seawater
Biber, N. F. A., Foggo, A., & Thompson, R. C. (2019) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2019.02.068 · Cited by 101
Susceptibility of low-density polyethylene and polyphosphoric acid-modified asphalt binders to rutting and fatigue cracking
Nuñez, J. Y. M., Domingos, M. D. I., & Faxina, A. L. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.002 · Cited by 98
Study of recycled polyethylene materials as asphalt modifiers
Ho, S. M. S., Church, R., Klassen, K., Law, B., MacLeod, D., & Zanzotto, L. (2006) · Canadian Journal of Civil Engineering · doi:10.1139/l06-044 · Cited by 97
Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE)
Tarantili, P. A., Mitsakaki, A. N., & Petoussi, M. A. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.029 · Cited by 96
Phase behavior and hot storage characteristics of asphalt modified with various polyethylene: Experimental and numerical characterizations
Liang, M., Xin, X., Fan, W., Wang, H., Jiang, H., Zhang, J., & Yao, Z. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.095 · Cited by 93
Vulcanization characteristics of asphalt/SBS blends in the presence of sulfur
Wen, G., Zhang, Y., Zhang, Y., Sun, K., & Chen, Z. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1932 · Cited by 88
Physicochemical and thermal analyses of polyurethane modified bitumen incorporated with Cecabase and Rediset: Optimization using response surface methodology
Khairuddin, F. H., Alamawi, M. Y., Yusoff, N. I. M., Badri, K. H., Ceylan, H., & Tawil, S. N. M. (2019) · Fuel · doi:10.1016/j.fuel.2019.115662 · Cited by 87
The effect of EAF dust and waste PVC on moisture sensitivity, rutting resistance, and fatigue performance of asphalt binders and mixtures
Ziari, H., Nasiri, E., Amini, A. A., & Ferdosian, O. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.101 · Cited by 85
A simple treatment of electronic-waste plastics to produce asphalt binder additives with improved properties
Hasan, M. R. M., Colbert, B. W., You, Z., Jamshidi, A., Heiden, P. A., & Hamzah, M. O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.017 · Cited by 84
Asphalt Surface Mixtures with Improved Performance Using Waste Polymers via Dry and Wet Processes
Ranieri, M., Costa, L. M. B., Oliveira, J. R. M., da Silva, H. M. R. D., & Celauro, C. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002022 · Cited by 84
Properties of Modified Asphalt Binders Blended with Electronic Waste Powders
Colbert, B. W., & You, Z. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000504 · Cited by 80
Rheological property and stability of polymer modified asphalt: Effect of various vinyl-acetate structures in EVA copolymers
Liang, M., Ren, S., Fan, W., Xin, X., Shi, J., & Luo, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.123 · Cited by 80
Natural and synthetic rubber/waste – Ethylene-Vinyl Acetate composites for sustainable application in the footwear industry
Lopes, D. F. C., Ferreira, M. J., Russo, R., & Dias, J. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.063 · Cited by 79
Laboratory evaluation on comprehensive performance of polyurethane rubber particle mixture
Gao, J., Wang, H., Chen, J., Meng, X., & You, Z. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.044 · Cited by 78
Recycled polycarbonate from electronic waste and its use in concrete: Effect of irradiation
Martínez, A. L. D. L. C., Martínez‐Barrera, G., Barrera-Díaz, C., Córdoba, L. I. Á., Ureña‐Núñez, F., & Delgado-Hernández, D. J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.147 · Cited by 76
Study on rheological properties and phase-change temperature control of asphalt modified by polyurethane solid–solid phase change material
Wei, K., Wang, X., Ma, B., Shi, W., Duan, S., & Liu, F. (2019) · Solar Energy · doi:10.1016/j.solener.2019.11.007 · Cited by 76
Performance evaluation of asphalt binder modified with EVA/HDPE/nanoclay based on linear and non-linear viscoelastic behaviors
Mansourian, A., Goahri, A. R., & Khosrowshahi, F. K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.065 · Cited by 75
Laboratory evaluation of ethylene vinyl acetate modified bitumens and mixtures based upon performance related parameters
Ameri, M., Mansourian, A., & Sheikhmotevali, A. H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.109 · Cited by 74
Stiffness modulus of Polyethylene Terephthalate modified asphalt mixture: A statistical analysis of the laboratory testing results
Moghaddam, T. B., Soltani, M., & Karim, M. R. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.11.044 · Cited by 74
Effect of processing on the rheological properties of poly-urethane/urea bituminous products
Carrera, V., Partal, P., García‐Morales, M., Gallegos, C., & Pérez‐Lepe, A. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.03.028 · Cited by 71
Preparation and characterization of an asphalt-modifying agent with waste packaging polyethylene and organic montmorillonite
Fang, C., Yu, R., Li, Y., Zhang, M., Hu, J., & Zhang, M. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.04.006 · Cited by 71
Bituminous polyurethane foams for building applications: Influence of bitumen hardness
Izquierdo, M. A., Navarro, F. J., Martínez-Boza, F. J., & Gallegos, C. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.088 · Cited by 70
Behavior of Reclaimed Polyethylene Modified Asphalt Cement for Paving Purposes
Punith, V. S., & Veeraragavan, A. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000235 · Cited by 70
Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance
Bala, N., Napiah, M., & Kamaruddin, I. (2018) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2018.03.011 · Cited by 70
Improving the performance of RET modified asphalt with the addition of polyurethane prepolymer (PUP)
Xu, C. S., Zhang, Z., Zhao, F., Liu, F., & Wang, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.101 · Cited by 70
Engineering Properties of Fiber Reinforced Cold Asphalt Mixes
Bueno, B. D. S., da Silva, W. R., de Lima, D. C., & Minette, E. (2003) · Journal of Environmental Engineering · doi:10.1061/(asce)0733-9372(2003)129:10(952 · Cited by 69
Recycling of PET wastes using Electron beam radiations and preparation of polyurethane coatings using recycled material
Jamdar, V., Kathalewar, M. S., Dubey, K. A., & Sabnis, A. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.02.007 · Cited by 69
The synergistic effect of organic montmorillonite and thermoplastic polyurethane on properties of asphalt binder
Jia, M. Q., Zhang, Z., Liu, H., Peng, B., Zhang, H., Lv, W., Zhang, Q., & Mao, Z. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116867 · Cited by 66
Utilisation of waste plastic in bituminous mix for improved performance of roads
Jafar, J. J. (2015) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-015-0511-0 · Cited by 64
Investigation on the Short-Term Aging-Resistance of Thermoplastic Polyurethane-Modified Asphalt Binders
Yu, R., Zhu, X., Zhang, M., & Fang, C. (2018) · Polymers · doi:10.3390/polym10111189 · Cited by 62
Influence of the grade on the variability of the mechanical properties of polypropylene waste
Jmal, H., Bahlouli, N., Wagner-Kocher, C., Leray, D., Ruch, F., Munsch, J.-N., & Nardin, M. (2018) · Waste Management · doi:10.1016/j.wasman.2018.02.006 · Cited by 61
Influence of polymer melting point and Melt Flow Index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application
Yuliestyan, A., Cuadri, A. A., García‐Morales, M., & Partal, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.003 · Cited by 60
Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens
Carrera, V., Cuadri, A. A., García‐Morales, M., & Partal, P. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.05.013 · Cited by 58
Effects of ethylene vinyl acetate and nanoclay additions on high-temperature performance of asphalt binders
Siddig, E. A. A., Feng, C. P., & Li, Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.012 · Cited by 58
Effect of Low-Density Polyethylene on Fracture Toughness of Asphalt Concrete Mixtures
Othman, A. M. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000106 · Cited by 57
Pyrolysis and catalytic pyrolysis as a recycling method of waste CDs originating from polycarbonate and HIPS
Antonakou, E. V., Kalogiannis, K. G., Stefanidis, S. D., Triantafyllidis, K. S., Lappas, A. A., & Achilias, D. S. (2014) · Waste Management · doi:10.1016/j.wasman.2014.08.014 · Cited by 57
Recycled Plastic Waste Asphalt Concrete via Mineral Aggregate Substitution and Binder Modification
Dalhat, M. A., Wahhab, H. I. A., & Al-Adham, K. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002744 · Cited by 55
Carbon footprint comparison of innovative techniques in the construction and maintenance of road infrastructure in The Netherlands
Keijzer, E., Leegwater, G. A., de Vos-Effting, S. E., & de Wit, M. S. (2015) · Environmental Science & Policy · doi:10.1016/j.envsci.2015.06.010 · Cited by 54
Genotoxic effects of fumes from asphalt modified with waste plastic and tall oil pitch
Lindberg, H. K., Väänänen, V., Järventaus, H., Suhonen, S., Nygren, J., Hämeilä, M., Valtonen, J., Heikkilä, P., & Norppa, H. (2008) · Mutation Research/Genetic Toxicology and Environmental Mutagenesis · doi:10.1016/j.mrgentox.2008.03.009 · Cited by 54
Effect of waste polymer modifier on the properties of bituminous concrete mixes
Sangita, S., Khan, T. A., Sabina, & Sharma, D. K. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.003 · Cited by 54
Pavement properties of asphalt modified with packaging‐waste polyethylene
Fang, C., Wu, C., Hu, J., Yu, R., Zhang, Z., Nie, L., Zhou, S., & Mi, X. (2014) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21328 · Cited by 52
Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies
Cuadri, A. A., Roman, C., García‐Morales, M., Guisado, F., Moreno, E., & Partal, P. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.09.018 · Cited by 52
Engineering behavior of aged polypropylene-modified asphalt pavements
Al-Hadidy, A.-R. I. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.10.007 · Cited by 52
Separation of polycarbonate and acrylonitrile–butadiene–styrene waste plastics by froth flotation combined with ammonia pretreatment
Wang, C., Wang, H., Liu, Q., Jian-gang, F., & Liu, Y. (2014) · Waste Management · doi:10.1016/j.wasman.2014.09.002 · Cited by 50
Laboratory investigation of rutting and fatigue in glassphalt containing waste plastic bottles
Arabani, M., & Pedram, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.105 · Cited by 50
Dynamic stability of ethylene-vinyl acetate copolymer/crumb rubber modified asphalt
Yu, R., Liu, X., Zhang, M., Zhu, X., & Fang, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.182 · Cited by 50
New polyurethane modified coating for maintenance of asphalt pavement potholes in winter-rainy condition
Liu, M., Han, S., Shang, W., Qi, X., Dong, S., & Zhang, Z. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.04.059 · Cited by 50
Analysis of the performance and mechanism of desulfurized rubber and low‐density polyethylene compound‐modified asphalt
Liu, S., Zhou, S. B., Peng, A., Xuan, W., & Li, W. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48194 · Cited by 50
Environmental impacts of disposable cups with special focus on the effect of material choices and end of life
Häkkinen, T., & Vares, S. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.05.005 · Cited by 49
Bituminous polyurethane network: Preparation, properties, and end use
Singh, B., Gupta, M., & Kumar, L. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23198 · Cited by 48
Hybrid Reinforcement of Asphalt-Concrete Mixtures Using Glass and Polypropylene Fibers
Abtahi, S. M., Esfandiarpour, S., Kunt, M. M., Hejazi, S. M., & Ebrahimi, M. G. (2013) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501300800203 · Cited by 48
Ammonia modification for flotation separation of polycarbonate and polystyrene waste plastics
Wang, C., Wang, H., Gu, G.-H., Lin, Q., Zhang, L., Huang, L.-L., & Zhao, J.-Y. (2016) · Waste Management · doi:10.1016/j.wasman.2016.02.037 · Cited by 48
Sustainable Green Pavement Using Bio-Based Polyurethane Binder in Tunnel
Leng, C., Lu, G., Gao, J., Liu, P., Xie, X., & Wang, D. (2019) · Materials · doi:10.3390/ma12121990 · Cited by 47
Rutting behavior of hot mix asphalt modified by polyvinyl chloride powder
Arabani, M., & Taleghani, M. Y. (2017) · Petroleum Science and Technology · doi:10.1080/10916466.2017.1336772 · Cited by 46
Preparation and Properties of Asphalt Modified with a Composite Composed of Waste Package Poly(vinyl chloride) and Organic Montmorillonite
Fang, C., Liu, X., Yu, R., Liu, P., & Lei, W. (2014) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2014.11.001 · Cited by 44
Bitumen modified with recycled polyurethane foam for employment in hot mix asphalt
Salas, M. A., Pérez-Acebo, H., Calderón, V., & Gonzalo‐Orden, H. (2018) · Ingeniería e Investigación · doi:10.15446/ing.investig.v38n1.65631 · Cited by 44
Recycled waste plastic for extending and modifying asphalt binders
White, G., & Reid, G. (2018) · Cited by 44
Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) film
Jeong, K.-D., Lee, S.-J., & Kim, K. W. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.068 · Cited by 42
Separation of polyvinyl chloride from waste plastic mixtures by froth flotation after surface modification with sodium persulfate
Chen, S., Zhang, Y., Guo, C., Zhong, Y., Wang, K., & Wang, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.280 · Cited by 42
Rheological properties and stability of ethylene vinyl acetate polymer‐modified bitumen
Bulatović, V. O., Rek, V., & Marković, K. J. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23462 · Cited by 40
Moisture Damage Analysis of Bituminous Mix by Durability Index Utilizing Waste Plastic Cup
Karmakar, S., Majhi, D., Roy, T. K., & Chanda, D. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002366 · Cited by 38
Influence of polycarbonate waste on gypsum composites: Mechanical and environmental study
Pedreño-Rojas, M. A., Morales-Conde, M. J., Gálvez, F. P., & de Hita, P. R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.200 · Cited by 37
Use and assessment of “e-plastics” as recycled aggregates in cement mortar
Makri, C., Hahladakis, J. Ν., & Gidarakos, E. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120776 · Cited by 37
Evaluation of Pyrolisis LDPE Modified Asphalt Paving Materials
Al-Hadidy, A.-R. I., & Tan, Y. (2009) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2009)21:10(618 · Cited by 35
Impact of Polypropylene Application Method on Long-Term Aging of Polypropylene-Modified HMA
Othman, A. M. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000105 · Cited by 35
Viscoelasticity of Asphalt Modified With Packaging Waste Expended Polystyrene
Fang, C., Jiao, L., Hu, J., Yu, Q., Guo, D., Zhou, X. H., & Yu, R. (2014) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2014.07.016 · Cited by 35
Effects of Different Curing Regimes on Engineering Properties of Polymer-Modified Mortar
Ramli, M. B., & Tabassi, A. A. (2011) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000394 · Cited by 34
Evaluation of Reclaimed Polyethylene Modified Asphalt Concrete Mixtures
Punith, V. S., Veeraragavan, A., & Amirkhanian, S. N. (2011) · International Journal of Pavement Research and Technology · Cited by 34
Polycarbonate Waste Management using Glycerol
Pant, D. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2015.12.012 · Cited by 32
A novel process for separation of polycarbonate, polyvinyl chloride and polymethyl methacrylate waste plastics by froth flotation
Wang, C., Wang, H., & Huang, L.-L. (2017) · Waste Management · doi:10.1016/j.wasman.2017.04.006 · Cited by 32
Deducing targets of emerging technologies based on ex ante life cycle thinking: Case study on a chlorine recovery process for polyvinyl chloride wastes
Lu, J., Kumagai, S., Ohno, H., Kameda, T., Saito, Y., Yoshioka, T., & Fukushima, Y. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104500 · Cited by 32
Optimal polypropylene fiber amount determination by using gyratory compaction, static creep and Marshall stability and flow analyses
Tapkın, S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.02.060 · Cited by 30
Performance evaluation of the senergy polycarbonate and asphalt carbon nanotube solar water heating collectors for building integration
Pugsley, A., Zacharopoulos, A., Smyth, M., & Mondol, J. D. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.10.082 · Cited by 30
Experimental evaluation of fatigue resistance of asphalt mixtures containing waste elastomeric polymers
Ameri, M., Yeganeh, S., & Valipour, P. E. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.017 · Cited by 29
Mastic of polymer‐modified bitumen and poly(vinyl chloride) wastes
Singh, B., Gupta, M., & Tarannum, H. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12795 · Cited by 27
Development circumstances of four recycling industries (used motor oil, acidic sludge, plastic wastes and blown bitumen) in the world
Unnisa, S. A., & Hassanpour, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.109 · Cited by 27
Reinforcement of Recycled Foamed Asphalt Using Short Polypropylene Fibers
Kim, Y., & Park, T. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/903236 · Cited by 25
Evaluation of a Cold-Mixed High-Performance Polyurethane Mixture
Sun, M., Bi, Y., Zheng, M., Chen, S., & Li, J. (2019) · Advances in Materials Science and Engineering · doi:10.1155/2019/1507971 · Cited by 25
Viability of Using Recycled Plastics in Asphalt and Sprayed Sealing Applications
Chin, C., & Damen, P. M. M. (2019) · Cited by 25
Effect of aggregate types on the performance of neat and EVA-modified asphalt mixtures
Singh, M., Kumar, P., & Maurya, M. R. (2013) · International Journal of Pavement Engineering · doi:10.1080/10298436.2013.812211 · Cited by 24
Hybrid composite using recycled polycarbonate/waste silk fibers and wood flour
Faezipour, M., Shamsi, R., Ashori, A., Abdulkhani, A., & Kargarfard, A. (2014) · Polymer Composites · doi:10.1002/pc.23339 · Cited by 24
Production and characterization of recycled polycarbonate based composite material containing recycled glass fibers
Zhu, P., Liu, X., Wang, Y., Guan, C., Yang, Y., Zhu, J., Li, X., Qian, G., & Frost, R. L. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.06.050 · Cited by 23
Effect of ionizing irradiation on the thermal blend of waste low density polyethylene/ethylene vinyl acetate/bitumen for some industrial applications
Gad, Y. H., Magida, M. M., & El‐Nahas, H. H. (2010) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2010.09.006 · Cited by 22
Modification of waterproofing asphalt by PVC packaging waste
Fang, C., Zhou, S., Zhang, M., & Zhao, S. (2009) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.20204 · Cited by 22
Effect of polypropylene fibers and recycled glass on AC mixtures mechanical properties
Javani, M., Kashi, E., & Mohamadi, S. (2019) · International Journal of Pavement Research and Technology · doi:10.1007/s42947-019-0056-6 · Cited by 22
Effects of waste PVC addition on the properties of (40-50) grade asphalt
Salman, N. D., & Jaleel, Z. T. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201816201046 · Cited by 21
Toughening characteristics of plastic fiber-reinforced hot-mix asphalt mixtures
Yoo, P. J., Ohm, B. S., & Choi, J. Y. (2012) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-012-1384-0 · Cited by 20
Effects of Asphalt Binder Modifying with Polypropylene on Moisture Susceptibility of Asphalt Mixtures with Thermodynamically Concepts
Hamedi, G. H., Azarhoosh, A., & Khodadadi, M. (2018) · Periodica Polytechnica Civil Engineering · doi:10.3311/ppci.11570 · Cited by 20
Mastic asphalt modified with recycled polyurethane foam
Salas, M. A., & Pérez-Acebo, H. (2018) · Journal of the Croatian Association of Civil Engineers · doi:10.14256/jce.2181.2017 · Cited by 19
Studying viscosity of asphalt binders and effect of varied production temperatures on engineering properties of hot mix asphalt mixtures
Diab, A. (2016) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2016-0383 · Cited by 18
Physical Properties of Low Density Polyethylene, Polyvinylchloride and Used Engine Oil Modified Asphalt
Maharaj, R., & Maharaj, C. (2015) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/147776061503100303 · Cited by 18
Laboratory Evaluation of Asphalt Containing Recycled Plastic as a Bitumen Extender and Modifier
White, G., & Magee, C. (2019) · Journal of Traffic and Transportation Engineering · doi:10.17265/2328-2142/2019.05.004 · Cited by 17
Preparation, Structure, and Properties of Modified Asphalt with Waste Packaging Polypropylene and Organic Rectorite
Cheng, Y., Fu, Q., Fang, C., Zhang, Q., & Lu, C. (2019) · Advances in Materials Science and Engineering · doi:10.1155/2019/5362795 · Cited by 16
Evaluation of Rheology and Moisture Susceptibility of Asphalt Mixtures Modified with Low Density Polyethylene
Bagampadde, U., Kaddu, D., & Kiggundu, B. M. (2013) · International Journal of Pavement Research and Technology · doi:10.6135/ijprt.org.tw/2013.6(3).217 · Cited by 15
Stone Matrix Asphalt Using Aggregates Modified with Waste Plastics
Sarang, G., Lekha, B. M., & Shankar, A. U. R. (2014) · doi:10.1061/9780784413418.002 · Cited by 15
A Comparative Study of Bituminous Mixtures with Recycled Polyethylene Added by Dry and Wet Processes
Angelone, S., Martinez, F., & Casaux, M. C. (2015) · Rilem bookseries · doi:10.1007/978-94-017-7342-3_47 · Cited by 15
Pre- and post-peak toughening behaviours of fibre-reinforced hot-mix asphalt mixtures
Yoo, P. J., & Al‐Qadi, I. L. (2013) · International Journal of Pavement Engineering · doi:10.1080/10298436.2013.839789 · Cited by 14
Performance of Waste Polymer Modified Road Paving Materials
Maharaj, R., Maharaj, C., & Hosein, A. (2018) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/147776061803400102 · Cited by 14
Study of Strengthening of Recycled Asphalt Concrete by Plastic Aggregates
Melbouci, B., Sadoun, S., & Bilek, A. (2014) · International Journal of Pavement Research and Technology · doi:10.6135/ijprt.org.tw/2014.7(4).280 · Cited by 12
Evaluation of Mechanical properties for polypropylene Modified Asphalt concrete Mixtures
Moubark, S., Khodary, F., & Othman, A. M. (2017) · International Journal of Scientific Research and Management (IJSRM) · doi:10.18535/ijsrm/v5i12.28 · Cited by 12
Acrylonitrile-Butadiene-Styrene (ABS)
Massey, L. K. (2005) · Elsevier eBooks · doi:10.1016/b978-081551505-0.50004-4 · Cited by 9
Short-Term Performance and Evolution of Material Properties of Warm- and Hot-Mix Asphalt Pavements: Case Studies
Wu, S., Zhang, W., Shen, S., Muhunthan, B., & Mohammad, L. N. (2017) · Transportation Research Record Journal of the Transportation Research Board · doi:10.3141/2631-05 · Cited by 9
Self-citation
UTILIZATION OF POLYPROPYLENE TO SUBSTITUTE BITUMEN FOR ASPHALT CONCRETE WEARING COURSE (AC-WC)
Sembiring, E. (2018) · International Journal of Geomate · doi:10.21660/2018.42.17347 · Cited by 9
Thermal and Rheological Formulation and Evaluation of Synthetic Bitumen from Reprocessed Polypropylene and Oil
Souza, R. S., Visconte, L. L. Y., da Silva, A. L. N., & Costa, V. G. (2018) · International Journal of Polymer Science · doi:10.1155/2018/7940857 · Cited by 8
Chemical modification of road asphalts by atactic polypropylene
Nekhoroshev, V. P., Nekhoroshev, S. V., Nekhorosheva, A. V., & Tarasova, O. I. (2017) · Petroleum Chemistry · doi:10.1134/s0965544117080084 · Cited by 7
Use of Recycled Plastic Waste Aggregate as a Partial Substitution Material in Pavement Structure
Qadir, A., & Imam, M. A. H. (2005) · Cited by 6
Using M-E PDG to Study the Effectiveness of Electronic Waste Materials Modification on Asphalt Pavements Design Thickness
Colbert, B. W., Diab, A., & You, Z. (2013) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.6135/ijprt.org.tw/2013.6(4).319 · Cited by 6
Effects of Additive Materials on Indirect Tensile Strength and Moisture Sensitivity of Recycled Asphalt Pavement (RAP)
Ebrahim, S. M., & Karim, H. K. (2019) · Kurdistan Journal of Applied Research · doi:10.24017/science.2019.2.8 · Cited by 6
The Use of Waste Plastic as a Partial Substitution Aggregate in Asphalt Concrete Pavement
Aschuri, I., Yamin, A., & Widyasih, Y. D. (2016) · Jurnal Teknik Sipil · doi:10.5614/jts.2016.23.1.1 · Cited by 5
Acrylonitrile-butadiene-styrene (ABS)
Gooch, J. W. (2006) · Springer eBooks · doi:10.1007/978-0-387-30160-0_193 · Cited by 2
Industrial Polypropylene Waste Used as Modifier in Asphalt Binder for Flexible Pavements
Yeole, C. R., Khanapure, V. U., Joshi, V. P., & Shelake, A. G. (2017) · Cited by 1

Flagged first, then by citations

1 of the 184 references couldn’t be matched to a known paper.

Research works printed but not linked: 5

Badr, 2018, Enhancing the physico-mechanical/rheological properties of asphalt 60/70 in different media via ma-pp compatibilized polypropylene/acrylonitrile butadiene rubber blends (Pp/Nbr). Petro, Coal, 60, 671
Chen, 2018, Experimental study on anti-icing and deicing performance of polyurethane concrete as road surface layer, Construct. Build. Mater., 161, 598, 10.1016/j.conbuildmat.2017.11.170 · DOI
Otuoze, 2015, Assessment of dynamic modulus of high density polypropylene waste fiber reinforcement in asphalt concrete, Leonardo Electron. J. Pract. Technol., 13
Otuoze, 2018, Rheology and simple performance test (SPT) evaluation of high-density polypropylene (HDPP) waste-modified bituminous mix, Jordan J. Civ. Eng., 12, 35
Salas, 2018, Introduction of recycled polyurethane foam in mastic asphalt, Gradevinar, 70, 403

Sorted by citations

Microbial degradation of microplastics by enzymatic processes: a review
Othman, A. R., Hasan, H. A., Muhamad, M. H., Ismail, N. ’., & Abdullah, S. R. S. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01197-9 · Cited by 441
A Brief Review of Poly(Vinyl Chloride) (PVC) Recycling
Lewandowski, K., & Skórczewska, K. (2022) · Polymers · doi:10.3390/polym14153035 · Cited by 240
“Functional upcycling” of polymer waste towards the design of new materials
Guselnikova, O., Semyonov, O., Sviridova, E., Gulyaev, R., Gorbunova, A., Kogolev, D., Trelin, A., Yamauchi, Y., Boukherroub, R., & Постников, П. С. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00689h · Cited by 231
Using Waste Plastics as Asphalt Modifier: A Review
Xu, F., Zhao, Y., & Li, K. (2021) · Materials · doi:10.3390/ma15010110 · Cited by 201
Polyurethane as a modifier for road asphalt: A literature review
Huang, G., Yang, T., He, Z., Yu, L., & Xiao, H. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129058 · Cited by 148

See all 310

Authors: Wu, S., & Montalvo, L.
Affiliations: University of South Alabama (US)
Corresponding author: Wu, Shenghua
ORCID: Wu, Shenghua
Montalvo, Luke
Venue: Journal of Cleaner Production
Publisher: Elsevier BV
Published: 2021-01
Volume: 280
Pages: 124355
ISSN: 0959-6526 (ISSN-L)
DOI: 10.1016/j.jclepro.2020.124355
OpenAlex: W3091090750
Cited by: 310
References: 184
Citations by year: 2026: 33 · 2025: 50 · 2024: 70 · 2023: 51 · 2022: 60 · 2021: 43
FWCI: 22.94
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
Locations: Journal of Cleaner Production (publishedVersion)
Funders: University of South Alabama
Topics: Physical Sciences › Engineering › Civil and Structural Engineering › Asphalt Pavement Performance Evaluation
Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
Keywords: waste plastic recycling, asphalt pavement, plastic-modified asphalt, polyethylene terephthalate, high-density polyethylene, polyvinyl chloride, polypropylene, polystyrene, asphalt mixtures, rutting resistance, fatigue cracking, moisture resistance, aggregate replacement, binder modification

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks