The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
A high-resolution code for turbulent boundary layers
Open accessAbstract
A new high-resolution code for the direct simulation of incompressible boundary layers over a flat plate is described. It can accommodate a wide range of pressure gradients, and general time-dependent boundary conditions such as incoming wakes or wall forcing. The consistency orders of the advective and pressure-correction steps are different, but it is shown that the overall resolution is controlled by the higher-order advection step. The formulation of boundary conditions to ensure global mass conservation in the presence of arbitrary forcing is carefully analyzed. Two validation boundary layers with and without a strong adverse pressure gradient are presented, with maximum Reynolds numbers Re"@q~2000. They agree well with the available experiments. Turbulent inflow conditions for the zero-pressure case are implemented by a recycling method, and it is shown that at least the initial 300 momentum thicknesses have to be discarded before the effect of the artificial inflow is forgotten. It is argued that this is not a defect of the method used to generate the inflow, but a property of the boundary layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Schlichting, H., & Gersten, K. (2000) · Springer eBooks · doi:10.1007/978-3-642-85829-1 · Cited by 18,700
Compact finite difference schemes with spectral-like resolution
Lele, S. K. (1992) · Journal of Computational Physics · doi:10.1016/0021-9991(92)90324-r · Cited by 6,147
Computational Methods for Fluid Dynamics
Ferziger, J. H., Peric, M., & Leonard, A. (1997) · Physics Today · doi:10.1063/1.881751 · Cited by 6,005
Turbulence statistics in fully developed channel flow at low Reynolds number
Kim, J., Moin, P., & Moser, R. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087000892 · Cited by 4,873 · cited 1×
“As a consequence, they were some of the first flows to be simulated [3,4], but the Reynolds numbers of those simulations have increased more slowly than for streamwise-homogeneous flows, such as pipes or channels [5,6].”
BackgroundDirect simulation of a turbulent boundary layer up to Rθ = 1410
Spalart, P. R. (1988) · Journal of Fluid Mechanics · doi:10.1017/s0022112088000345 · Cited by 1,833
Generation of Turbulent Inflow Data for Spatially-Developing Boundary Layer Simulations
Lund, T. S., Wu, X., & Squires, K. D. (1998) · Journal of Computational Physics · doi:10.1006/jcph.1998.5882 · Cited by 1,523
Scaling of the velocity fluctuations in turbulent channels up to Reτ=2003
Hoyas, S., & Jiménez, J. (2006) · Physics of Fluids · doi:10.1063/1.2162185 · Cited by 1,018
Self-citationDirect numerical simulation of ‘short’ laminar separation bubbles with turbulent reattachment
Alam, M., & Sandham, N. D. (2000) · Journal of Fluid Mechanics · doi:10.1017/s0022112099008976 · Cited by 500
Numerical simulation of incompressible flows within simple boundaries: accuracy
Orszag, S. A. (1971) · Journal of Fluid Mechanics · doi:10.1017/s0022112071001940 · Cited by 271
Direct numerical simulation of a separated turbulent boundary layer
SKOTE, M., & HENNINGSON, D. S. (2002) · Journal of Fluid Mechanics · doi:10.1017/s0022112002002173 · Cited by 166
Energetic spanwise modes in the logarithmic layer of a turbulent boundary layer
Tomkins, C. D., & Adrian, R. J. (2005) · Journal of Fluid Mechanics · doi:10.1017/s0022112005006397 · Cited by 80
DNS and scaling laws from new symmetry groups of ZPG turbulent boundary layer flow
Khujadze, G. R., & Oberlack, M. (2004) · Theoretical and Computational Fluid Dynamics · doi:10.1007/s00162-004-0149-x · Cited by 68
Cited by
One-point statistics for turbulent wall-bounded flows at Reynolds numbers up to δ+ ≈ 2000
Sillero, J. A., Jiménez, J., & Moser, R. D. (2013) · Physics of Fluids · doi:10.1063/1.4823831 · Cited by 460
Self-citationTurbulence in supersonic boundary layers at moderate Reynolds number
Pirozzoli, S., & Bernardini, M. (2011) · Journal of Fluid Mechanics · doi:10.1017/jfm.2011.368 · Cited by 401
Cascades in Wall-Bounded Turbulence
Jiménez, J. (2012) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-120710-101039 · Cited by 379
Self-citationTurbulent boundary layers and channels at moderate Reynolds numbers
JIMÉNEZ, J., HOYAS, S., SIMENS, M. P., & MIZUNO, Y. (2010) · Journal of Fluid Mechanics · doi:10.1017/s0022112010001370 · Cited by 364
Self-citationTurbulent boundary layers at moderate Reynolds numbers: inflow length and tripping effects
Schlatter, P., & Örlü, R. (2012) · Journal of Fluid Mechanics · doi:10.1017/jfm.2012.324 · Cited by 288
Metadata
- Authors
- Simens, M. P., Jiménez, J., Hoyas, S., & Mizuno, Y.
- Venue
- Journal of Computational Physics
- Publisher
- Elsevier BV
- Published
- 2009-06
- Volume
- 228
- Issue
- 11
- Pages
- 4218-4231
- ISSN
- 0021-9991 (ISSN-L)
- OpenAlex
- W1988916147
- Cited by
- 280
- References
- 12
- FWCI
- 18.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.