The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The art of coupon tests
Open accessAbstract
Abstract Tensile coupon tests are commonly carried out to determine the material properties of metallic materials in research and industry. However, ambiguities are found in the current specifications in determining initial Young's modulus of material, which may lead to different test results. The material properties lay the crucial foundation in research and structural design. Different researchers may interpret coupon test results differently. Therefore, standard procedures of coupon test and the interpretation of test results are important and worth investigating. In this study, a series of tensile coupon tests on metallic materials, such as cold-formed carbon steel, cold-formed stainless steel and aluminum alloy, were carried out using different test and data analysis procedures. Two types of stainless steel materials, namely lean duplex and ferritic, were investigated. The test and data analysis procedures of loading rate on coupon specimens, determination of cross-sectional area of curved coupons and Young's modulus were carefully designed. In this study, tensile coupon test and data analysis procedures are proposed for both flat and curved coupons. The proposed procedures are able to eliminate possible errors and provide clear guidelines for tensile coupon tests.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Testing and numerical modelling of lean duplex stainless steel hollow section columns
Theofanous, M., & Gardner, L. (2009) · Engineering Structures · doi:10.1016/j.engstruct.2009.08.004 · Cited by 251
Krempl, E. (2003) · International Journal of Plasticity · doi:10.1016/s0749-6419(03)00002-0 · Cited by 199
Strength enhancements in cold-formed structural sections — Part I: Material testing
Afshan, S., Rossi, B., & Gardner, L. (2013) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2012.12.008 · Cited by 175
Cited by
Description of stress–strain curves for stainless steel alloys
Arrayago, I., Real, E., & Gardner, L. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.001 · Cited by 563
He, A., Liang, Y., & Zhao, O. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110893 · Cited by 42
Axial slenderness limits for duplex and lean duplex stainless steel-concrete composite columns
Kazemzadeh Azad, S., Li, D., & Uy, B. (2020) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2020.106175 · Cited by 24
Orlowski, K. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2019.110053 · Cited by 14
Metadata
- Authors
- Huang, Y., & Young, B.
- Venue
- Journal of Constructional Steel Research
- Publisher
- Elsevier BV
- Published
- 2014-05
- Volume
- 96
- Pages
- 159-175
- ISSN
- 0143-974X (ISSN-L)
- OpenAlex
- W2029842876
- Cited by
- 453
- References
- 3
- FWCI
- 14.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The art of coupon tests. https://app.cochat.ai/papers/10.1016/j.jcsr.2014.01.010
- The paper
- Huang, Y., & Young, B. (2014). The art of coupon tests. Journal of Constructional Steel Research. https://doi.org/10.1016/j.jcsr.2014.01.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.