The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Thermal analysis and heat capacity study of polyethylene glycol (PEG) phase change materials for thermal energy storage applications
Abstract
Abstract Phase change materials (PCMs) generally offer high latent heats for a wide range of thermal energy storage technologies. As typical organic PCMs, polyethylene glycol (PEG) has been widely studied due to their high latent enthalpy, non-toxic and non-corrosive natures. However, the thermal properties especially the heat capacities of PEG, which would play a vital role in theoretically and technically investigating PCM thermal performance, have never been studied in a wide temperature region. Herein, we reported the heat capacities of PEG samples with the molar massvarying from 1000 to 20,000 for the first time in the temperature range from (1.9 to 400) K using a combination method of Physical Property Measurement System (PPMS) and differential scanning calorimeter (DSC). Furthermore, the standard molar heat capacity, entropy and enthalpy at 298.15 K and 0.1 MPa were calculated based on the heat capacity curve fitting. Meanwhile, the phase transition temperature and enthalpy, thermal conductivity and thermal stability of these PEG samples were measured using various thermal analysis methods, and these thermal properties were also compared with the previous results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Karaman, S., Karaipekli, A., Sarı, A., & Biçer, A. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.022 · Cited by 687
Yang, J., Zhang, E., Li, X., Zhang, Y., Qu, J., & Yu, Z.-Z. (2016) · Carbon · doi:10.1016/j.carbon.2015.10.082 · Cited by 458
Kim, H., Lee, D., Kim, J., Kim, T.-I., & Kim, W. J. (2013) · ACS Nano · doi:10.1021/nn403096s · Cited by 420
Wang, Y., Tang, B., & Zhang, S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203728 · Cited by 405
Qian, T., Li, J., Min, X., Guan, W., Deng, Y., & Ning, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00309a · Cited by 372
Emerging Applications of Phase‐Change Materials (PCMs): Teaching an Old Dog New Tricks
Hyun, D. C., Levinson, N. S., Jeong, U., & Xia, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201305201 · Cited by 363
Deng, Y., Li, J., Qian, T., Guan, W., Li, Y., & Yin, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.068 · Cited by 351
Pielichowski, K., & Flejtuch, K. (2002) · Polymers for Advanced Technologies · doi:10.1002/pat.276 · Cited by 330
Yang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.025 · Cited by 279
Sundararajan, S., Samui, A. B., & Kulkarni, P. S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04968d · Cited by 258
Yang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08454k · Cited by 255
Feng, L., Zhao, W., Zheng, J., Frisco, S., Song, P., & Li, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.020 · Cited by 235
Wang, J., Yang, M., Lu, Y., Jin, Z., Tan, L., Gao, H., Fan, S., Dong, W., & Wang, G. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.11.001 · Cited by 213
Polyurethanes as solid–solid phase change materials for thermal energy storage
Alkan, C., Günther, E., Hiebler, S., Ensari, Ö. F., & Kahraman, D. (2012) · Solar Energy · doi:10.1016/j.solener.2012.03.012 · Cited by 163
PEG/SiO2–Al2O3 hybrid form-stable phase change materials with enhanced thermal conductivity
Tang, B., Wu, C., Qiu, M., Zhang, X., & Zhang, S. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.12.036 · Cited by 162
Shi, Q., Snow, C. L., Boerio‐Goates, J., & Woodfield, B. F. (2010) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2010.04.008 · Cited by 146
Self-citationShi, Q., Boerio‐Goates, J., & Woodfield, B. F. (2011) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2011.03.018 · Cited by 131
Self-citationZhou, Y., Sheng, D., Liu, X., Lin, C., Ji, F., Li, D., Xu, S., & Yang, Y. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.031 · Cited by 123
Wu, W., Huang, X., Li, K., Yao, R., Chen, R., & Zou, R. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.159 · Cited by 108
(2001) · Choice Reviews Online · doi:10.5860/choice.39-0322 · Cited by 98
Tang, J., Yang, M., Dong, W., Yang, M., Zhang, H., Fan, S., Wang, J., Tan, L., & Wang, G. (2016) · RSC Advances · doi:10.1039/c6ra04059d · Cited by 93
Jiang, Y., Wang, Z., Shang, M., Zhang, Z., & Zhang, S. (2015) · Nanoscale · doi:10.1039/c5nr02051d · Cited by 73
Xi, P., Duan, Y., Fei, P., Xia, L., Liu, R., & Cheng, B. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.04.009 · Cited by 64
Sarı, A., Alkan, C., Karaipekli, A., et al. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31623 · Cited by 64
Smart hydrogel-functionalized textile system with moisture management property for skin application
Wang, X., Hu, H., Yang, Z., He, L., Kong, Y., Fei, B., & Xin, J. H. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/12/125027 · Cited by 58
Jia, R., Sun, K., Li, R., Zhang, Y., Wang, W., Yin, H., Fang, D., Shi, Q., & Tan, Z. (2017) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2017.08.004 · Cited by 57
Self-citationHolding, S. R. (2010) · Chromatographia · doi:10.1365/s10337-010-1620-z · Cited by 54
Cellulose–PEG grafts from cotton waste in thermo-regulating textiles
Kuru, A., & Aksoy, S. A. (2013) · Textile Research Journal · doi:10.1177/0040517513494251 · Cited by 49
Li, H., & Fang, G. ‐. (2010) · Chemical Engineering & Technology · doi:10.1002/ceat.201000102 · Cited by 44
Cited by
An intrinsically flexible phase change film for wearable thermal managements
Kou, Y., Sun, K., Luo, J., Zhou, F., Huang, H., Wu, Z.-S., & Shi, Q. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.014 · Cited by 318
Self-citationZheng, X., Bao, Y., Huang, A., Yu, L., & Qin, G. (2023) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2023.107022 · Cited by 24
Metadata
- Authors
- Kou, Y., Wang, S., Luo, J., Sun, K., Zhang, J., Tan, Z., & Shi, Q.
- Venue
- The Journal of Chemical Thermodynamics
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 128
- Pages
- 259-274
- ISSN
- 0021-9614 (ISSN-L)
- OpenAlex
- W2888105445
- Cited by
- 273
- References
- 30
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.