The DOI matches its Crossref record.
Hollow fibre membrane contactors for ammonia recovery: Current status and future developments
Open accessAbstract
Hydrophobic membrane contactors represent a credible solution to the problem of recycling ammoniacal nitrogen from waste, water or wastewater resources. This study critically evaluated existing literature in terms of process principles, membrane types and functionality, membrane contactor application, technology status, and future research required. The key operational parameter was the presence of ammonia gas and thus pH should be above 9. Hollow fibre membranes are usually employed, composed of primarily polypropylene, polyvinylidene fluoride, or polytetrafluoroethylene. The stripping solution is normally sulphuric acid which reacts with ammonia to create ammonium sulphate. The acid is best circulated inside the lumen with any suitable velocity, and kept in excess concentration. In terms of operational parameters: feed fluid velocity is important in open loop configurations due to the effect upon ammonia residence time at the membrane surface; and, ammonia concentration did not notably impact the mass transfer coefficient which was ca. 1 × 10−5 m/s until in excess of 2000 mg/L wherein the transport process diminished. The greatest quantity of ammonia was recovered in the initial membrane stages where the driving force is greatest. Bench and pilot plant studies concerned wastewater treatment plants, anaerobic digesters, manure management, industrial manufacturing, and animal rearing operations. It is recommended to focus upon challenges such as development of new membrane types customised for ammonia removal, a greater understanding of the process engineering and economics involved, consideration of the impact of osmotic distillation, integration of membrane contactors with other water treatment technologies and development of cleaning in place procedures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Horseman, T., Yin, Y., Christie, K. S., Wang, Z., Tong, T., & Lin, S. (2021) · ACS ES&T Engineering · doi:10.1021/acsestengg.0c00025 · Cited by 421
Ionic liquids combined with membrane separation processes: A review
Yan, X., Anguille, S., Bendahan, M., & Moulin, P. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.03.103 · Cited by 302
Metal–organic frameworks (MOFs): potential and challenges for capture and abatement of ammonia
Vikrant, K., Kumar, V., Kim, K.-H., & Kukkar, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07847a · Cited by 299
Arola, K., Van der Bruggen, B., Mänttäri, M., & Kallioinen, M. (2019) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2019.1594519 · Cited by 148
Role of hydrogen bonding in the capture and storage of ammonia in zeolites
Matito-Martos, I., Martin-Calvo, A., Ania, C. O., Parra, J. B., Vicent-Luna, J. M., & Calero, S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124062 · Cited by 68
Metadata
- Authors
- Darestani, M., Haigh, V., Couperthwaite, S. J., Millar, G. J., & Nghiem, L. D.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2017-04
- Volume
- 5
- Issue
- 2
- Pages
- 1349-1359
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W2587554304
- Cited by
- 232
- References
- 0
- FWCI
- 8.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hollow fibre membrane contactors for ammonia recovery: Current status and future developments. https://app.cochat.ai/papers/10.1016/j.jece.2017.02.016
- The paper
- Darestani, M., Haigh, V., Couperthwaite, S. J., Millar, G. J., & Nghiem, L. D. (2017). Hollow fibre membrane contactors for ammonia recovery: Current status and future developments. Journal of Environmental Chemical Engineering. https://doi.org/10.1016/j.jece.2017.02.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.