The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Preparation of activated carbon from peanut shell with KOH activation and its application for H2S adsorption in confined space
Abstract
Abstract Hydrogen sulfide (H2S), as a major air pollutant, poses a serious threat to people`s health, especially in confined spaces. In this study, a porous carbon filter was developed by impregnating a copper on activated carbon derived from peanut shell biomass. The carbonization temperature can significantly affect the texture properties of activated carbon, and the optimized temperature was 450 ℃. The optimal activated carbon sample (SBET = 1523.2 m2/g, Vmicro = 0.533 cm3/g) was prepared at a carbonization temperature of 450℃ and KOH activation at 750 ℃. The best adsorption performance was obtained with a copper impregnated optimal activated carbon (Cu/PAC-450) filter, and the maximum adsorption capacity was found to be 97.63 mg/g. As the initial concentration of H2S increased, the adsorption efficiency decreased. Adsorption isotherm and kinetic studies showed that Langmuir isotherm model was the best-fitted model for the adsorption of H2S on Cu/PAC-450 filter, with a correlation coefficient of 0.9627. The adsorption kinetic process followed the pseudo first order model, and the adsorption mechanism was controlled by intraparticle diffusion along with film diffusion model. The used Cu/PAC-450 filter can be successfully regenerated, which showed good reusability. The Cu/PAC-450 has a very broad prospect for use in household appliances (such as refrigerator, air conditioner, microwave oven, etc.) for indoor air purification. Therefore, this study is expected to expand the utilization of agriculture waste for the indoor air purification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
Khezami, L., Chetouani, A., Taouk, B., & Capart, R. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.05.009 · Cited by 236
Cited by
Chakraborty, R., K, V., Pradhan, M., & Nayak, A. K. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta10269a · Cited by 314
Lobato-Peralta, D. R., Okoye, P. U., & Alegre, C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235140 · Cited by 266
Kumar Mishra, R., Singh, B., & Acharya, B. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100228 · Cited by 132
Perspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Mani, D., Elango, D., Priyadharsan, A., Al-Humaid, L. A., Al- Dahmash, N. D., Ragupathy, S., Jayanthi, P., & Ahn, Y.-H. (2023) · Environmental Research · doi:10.1016/j.envres.2023.116026 · Cited by 62
Metadata
- Authors
- Wang, S., Nam, H., & Nam, H.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 8
- Issue
- 2
- Pages
- 103683
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W2999397798
- Cited by
- 195
- References
- 3
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of activated carbon from peanut shell with KOH activation and its application for H2S adsorption in confined space. https://app.cochat.ai/papers/10.1016/j.jece.2020.103683
- The paper
- Wang, S., Nam, H., & Nam, H. (2020). Preparation of activated carbon from peanut shell with KOH activation and its application for H2S adsorption in confined space. Journal of Environmental Chemical Engineering. https://doi.org/10.1016/j.jece.2020.103683
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.